Introduction
Thank you for choosing the NUBWO N2 Gaming Headset. This manual provides detailed instructions for setting up, operating, and maintaining your headset to ensure optimal performance and longevity. The N2 headset is designed for an immersive audio experience across multiple gaming platforms.
Package Contents
- NUBWO N2 Gaming Headset ×1
- User Manual ×1
- PC Extension cable ×1
- Mic Cover ×1
Product Overview
The NUBWO N2 Gaming Headset features 50mm drivers for clear audio and deep bass, a noise-canceling microphone for clear communication, and an ergonomic design for comfort during extended use. It includes convenient on-ear controls for volume adjustment.
Image: NUBWO N2 Gaming Headset with icons indicating 50mm speakers, comfort, and noise reduction.
Image: A gamer wearing the NUBWO N2 headset during a gaming session.
Setup Instructions
Connecting to PC
- For PCs with a single 3.5mm audio jack (combined headphone/microphone), plug the headset's 3.5mm connector directly into the port.
- For PCs with separate audio (green) and microphone (pink) ports, use the included PC Extension Cable. Connect the headset's 3.5mm jack to the female end of the extension cable, then plug the green and pink connectors of the extension cable into the corresponding ports on your PC.
- Adjust sound settings in your operating system to ensure the headset is selected as the default audio input and output device.
Connecting to Consoles (Xbox One, PS4, Nintendo Switch)
- Xbox One: Plug the headset's 3.5mm jack directly into the 3.5mm port on your Xbox One controller. For older controllers without a 3.5mm port, an Xbox One Stereo Headset Adapter (sold separately) is required.
- PS4 / PS4 Pro: Plug the headset's 3.5mm jack into the 3.5mm port on your PS4 controller. After connecting, go to Settings > Devices > Audio Devices and set "Output to Headphones" to "All Audio".
- Nintendo Switch: Plug the headset's 3.5mm jack into the 3.5mm audio port on the Nintendo Switch console.
- Mobile/Tablet Devices: Plug the headset's 3.5mm jack into the device's 3.5mm audio port.
Operating Instructions
Volume Control
The NUBWO N2 headset features a rotary volume adjuster located on the left ear cup. Rotate the wheel upwards to increase volume and downwards to decrease volume.
Microphone Usage
The flexible microphone boom can be adjusted to your preferred position. To mute or unmute the microphone, use the switch located on the microphone itself. Ensure the mic cover is properly placed for optimal voice clarity and to reduce plosive sounds.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the headset. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the headset in a cool, dry place away from direct sunlight and extreme temperatures.
- Cable Care: Avoid sharply bending or twisting the cable to prevent internal damage. The braided cable is designed for durability, but proper care extends its lifespan.
Troubleshooting
- No Sound or Low Volume:
- Ensure the headset's volume control is turned up.
- Check your device's volume settings and ensure the headset is selected as the output device.
- Verify that the 3.5mm jack is fully inserted into the port.
- If using the PC Extension Cable, ensure all connections are secure.
- Test the headset with another device to rule out a device-specific issue.
- Microphone Not Working:
- Ensure the microphone mute switch on the headset is in the "unmute" position.
- Check your device's sound settings and ensure the headset microphone is selected as the input device.
- Verify that the 3.5mm jack (and PC Extension Cable, if applicable) is fully inserted.
- Test the microphone with another application or device.
- Poor Sound Quality:
- Ensure the audio source is of good quality.
- Check for loose connections.
- Adjust equalizer settings on your device if available.
Specifications
| Model Name | N2 Gaming Headset |
| Driver Diameter | ø50mm |
| Sensitivity | 104±3dB |
| Impedance | 32Ω±15% |
| Frequency Range | 20~20000 Hz |
| Microphone Sensitivity | -38±3dB |
| Microphone Impedance | 2.2KΩ |
| Plug Type | 3.5mm (CTIA standard) |
| Connectivity Technology | Wired |
| Compatible Devices | PC, Xbox One, PS4, Switch, Wii U, Mobile Devices |
| Item Weight | 14.1 ounces (approx. 400g) |
| Cable Feature | Braided, 1.6 meters (approx. 5.25 ft) |
Warranty and Support
NUBWO products are designed for reliability and performance. For warranty information, technical support, or assistance with your N2 Gaming Headset, please refer to the official NUBWO website or contact NUBWO customer service directly. Keep your purchase receipt for warranty claims.
