Metaltech E-PWP7000AL Jobsite Series 30-inch Portable Work Platform Instruction Manual

1. Introduction

The Metaltech E-PWP7000AL Jobsite Series 30-inch Portable Work Platform is a versatile tool designed for various tasks requiring elevated access. It functions as a step ladder, a stable work deck, or a portable workbench. Constructed from lightweight aluminum, this platform offers a load capacity of up to 350 lbs, supporting both the user and materials. Key features include a slip-resistant surface, easy-to-use safety locks, and slip-resistant rubber feet, ensuring stability and safety during use. Its foldable design allows for easy transport and storage.

2. Safety Information

Before each use, inspect the work platform for any damage or loose components. Ensure all safety locks are engaged and the rubber feet are securely in place on a stable, level surface. Do not exceed the maximum load capacity of 350 lbs. Distribute weight evenly on the platform. Avoid using the platform on slippery or uneven ground without proper stabilization. Always maintain three points of contact (two feet and one hand, or two hands and one foot) when ascending or descending. Do not overreach or lean excessively while on the platform.

3. Product Components

The Metaltech E-PWP7000AL Portable Work Platform consists of the following main components:

• Platform Surface: The primary standing or working area, featuring a slip-resistant texture.
• Folding Legs: Four aluminum legs that fold for storage and extend for use.
• Safety Locks: Mechanisms to secure the legs in their extended position.
• Rubber Feet: Non-slip caps on the bottom of each leg for enhanced stability and floor protection.

4. Setup and Assembly

The Metaltech E-PWP7000AL Portable Work Platform requires minimal assembly:

1. Unfolding the Platform: Place the folded platform on a flat, stable surface. Gently pull the legs outwards from the main platform body.
2. Engaging Safety Locks: As the legs extend, ensure the safety locks click into place, securing each leg in its fully open position. Verify that all four legs are locked before use.
3. Stability Check: Before stepping onto the platform, gently push down on the center to confirm it is stable and does not wobble. Ensure all rubber feet are making full contact with the ground.

Note: Detailed assembly instructions are provided with the product. Refer to these for specific visual guidance.

5. Operating Instructions

The work platform can be used for various tasks:

• As a Step Stool: For reaching elevated areas safely. Ensure the platform is placed on a level surface. Step onto the center of the platform, maintaining balance.
• As a Work Deck: Provides a stable elevated surface for tasks such as painting, drywall installation, or electrical work. Position the platform to allow comfortable reach without overextending.
• As a Portable Workbench: Can be used to hold tools and materials at a convenient height. For larger work surfaces, two platforms can be placed side-by-side.

Always ensure the platform is clean and free of debris before use. Avoid sudden movements or jumping on the platform.

6. Maintenance

Regular maintenance ensures the longevity and safe operation of your work platform.

• Cleaning: Wipe down the aluminum surfaces with a damp cloth after each use to remove dust, paint, or other debris. Avoid abrasive cleaners that could damage the finish or slip-resistant surface.
• Inspection: Periodically check all components for signs of wear, damage, or corrosion. Pay close attention to the leg hinges, safety locks, and rubber feet.
• Storage: Store the platform in a clean, dry place when not in use. Ensure it is folded correctly to prevent accidental damage.

7. Storage and Transport

The Metaltech E-PWP7000AL is designed for easy storage and transport.

1. Folding the Platform: To fold, disengage the safety locks on each leg. Gently push the legs inwards until they are flush with the main platform body.
2. Securing for Transport: Ensure the platform is fully folded and compact. The lightweight aluminum construction makes it easy to carry.
3. Storage: Store the folded platform in a designated area, away from obstructions, to prevent tripping hazards or damage.

8. Troubleshooting

If you encounter issues with your work platform, consider the following:

• Instability: Ensure all four legs are fully extended and their safety locks are engaged. Verify the platform is on a level, solid surface. Check for any bent or damaged legs.
• Difficulty Folding/Unfolding: Ensure no debris is obstructing the hinge mechanisms. Apply gentle, even pressure when folding or unfolding. Do not force the components.
• Damaged Components: If any part of the platform is bent, cracked, or otherwise damaged, discontinue use immediately. Do not attempt to repair structural components yourself.

9. Specifications

10. Warranty and Support

The Metaltech E-PWP7000AL Portable Work Platform comes with a one-year warranty against manufacturing defects. This warranty covers defects in materials and workmanship under normal use. For warranty claims or technical support, please contact Metaltech customer service. Keep your purchase receipt as proof of purchase.