Split-Ender SEP2-B/US

Download PDF
Contents

Split-Ender Pro 2 Cordless Split End Hair Trimmer User Manual

Model: SEP2-B/US | Brand: Split-Ender

1. Introduction

The Split-Ender Pro 2 is a professional beauty tool designed to trim split ends from hair, promoting healthier and more vibrant hair without sacrificing length. This cordless device is suitable for various hair types and is intended for home use.

2. Safety Information

Please read all safety warnings and instructions before using this product to prevent potential hazards such as skin irritation or injury.

  • Ensure the device is fully charged before use to ensure optimal performance.
  • Use only on clean, dry, and tangle-free hair.
  • Keep out of reach of children.
  • Do not immerse the device in water or use it in wet environments.
  • Avoid contact with eyes.

3. What's in the Box

Your Split-Ender Pro 2 package includes the following items:

  • Split-Ender Pro 2 Trimmer
  • Rechargeable Battery (pre-installed)
  • Power Adapter (Bi-Volt 110-240 Volts)
  • Cleaning Brush
  • Carrying Bag
  • User Manual
Split-Ender Pro 2 box with device and accessories

Image: The Split-Ender Pro 2 packaging, showing the device, charging cable, cleaning brush, and carrying bag.

4. Setup

  1. Initial Charge: Before first use, fully charge the device for 3 to 4 hours. The device can be used while plugged in or wirelessly.
  2. Hair Preparation: Ensure your hair is clean, dry, and completely free of tangles. For frizzy or curly hair, it is recommended to straighten your hair before using the Split-Ender Pro 2 for optimal results.

5. Operating Instructions

Follow these steps for effective split end trimming:

  1. Prepare Hair: Comb a small, thin section of hair to remove any tangles.
  2. Unlock & Position: Slide the lock to the 'OFF' position. Select the arrow pointing downwards (for trimming). Place the prepared hair section onto the center of the hair plate.
  3. Trim: Squeeze the handle to activate the device. Slowly glide the device from the root to the tip of the hair section. Repeat this process 3 times per section.
  4. Finish: Continue section by section until all desired hair is treated. Observe the removed split ends through the transparent window.
Four easy steps to use the Split-Ender Pro 2

Image: Visual guide illustrating the four easy steps for using the Split-Ender Pro 2.

Official Product Videos

Video: Split Ender How-To. This video demonstrates the proper technique for using the Split-Ender Pro 2 to effectively remove split ends.

Video: Yes, it's that good. And here's why. This video highlights the benefits and effectiveness of the Split-Ender Pro 2.

Video: Keep your hair healthy-split end trimmer. This video showcases how the Split-Ender Pro 2 helps maintain hair health by removing split ends.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your Split-Ender Pro 2.

  • Cleaning: After each use, open the hair chamber and use the provided cleaning brush to remove all trimmed hair. Ensure the blades are free of debris.
  • Storage: Store the device in its carrying bag in a cool, dry place, away from direct sunlight and moisture.
Close-up of the Split-Ender Pro 2 collecting trimmed hair

Image: The Split-Ender Pro 2 with its transparent chamber showing collected trimmed hair, indicating the need for cleaning.

7. Troubleshooting

  • Device Not Turning On: Ensure the battery is fully charged. Connect the device to the power adapter and try again.
  • Poor Trimming Performance: Make sure your hair is clean, dry, and detangled. Use small, thin sections of hair. Clean the hair chamber and blades thoroughly.
  • Hair Pulling: This can occur if hair is not properly detangled or if sections are too large. Ensure hair is combed smooth and sections are small before inserting into the device.

8. Specifications

FeatureDetail
Model NumberSEP2-B/US
Power SourceBattery Powered (Rechargeable)
VoltageBi-Volt 110-240 Volts
Trim SettingFixed 1/4 inch
Product Dimensions12.5 x 5.5 x 3.75 inches
Item Weight980 Grams (2.16 Pounds)
ColorBlack
ManufacturerTalavera Hair Products LLC
Detailed diagram of Split-Ender Pro 2 components

Image: An exploded view diagram of the Split-Ender Pro 2, labeling its various components such as titanium-coated blades, hair chamber, and directional switch.

9. Warranty and Support

The Split-Ender Pro 2 comes with a 1-Year Warranty. For any questions, concerns, or support needs, please contact Talavera Hair Products LLC customer service. We are committed to providing a 100% satisfaction solution.

© 2025 Split-Ender. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.