Invicta Men's Bolt Model 23860 Quartz Watch Instruction Manual

Introduction

This manual provides essential instructions for the proper use and care of your Invicta Men's Bolt Model 23860 Quartz Watch. Please read this manual thoroughly to ensure optimal performance and longevity of your timepiece. This watch features a precise Japanese quartz movement, chronograph functions, and robust water resistance.

Figure 1: Front view of the Invicta Men's Bolt Model 23860 Quartz Watch.

Safety Precautions

Please observe the following safety guidelines to prevent damage to your watch or personal injury:

• INGESTION HAZARD: This product contains a button cell or coin battery. DEATH or serious injury can occur if ingested. A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours. Keep new and used batteries OUT OF REACH OF CHILDREN. Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
• This product is intended to be opened only by professionals.
• Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children.
• Do NOT dispose of batteries in household trash or incinerate.
• Even used batteries may cause severe injury or death.
• Non-rechargeable batteries are not to be recharged.
• Do not force discharge, recharge, disassemble, heat above (manufacturer's specified temperature rating) or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns.

When storing the watch, avoid places with strong magnetism.

Watch Components and Features

Familiarize yourself with the key components of your Invicta Bolt watch:

Figure 2: Key features of the Invicta Bolt 23860 watch.

Figure 3: Bracelet features including the buckle clasp and silicone band.

Figure 4: Movement details including chronograph, timekeeping, and date display.

Figure 5: Side view highlighting the screw-down crown and chronograph pushers.

• Crown: Screw-down crown for an extra water-tight seal.
• Bezel: Fixed stainless steel bezel to help protect the dial and enhance durability.
• Case Size: 48mm diameter, anatomically designed for an optimal fit.
• Crystal Type: Mineral crystal, scratch-resistant for protection and durability.
• Bracelet: Black silicone band with a buckle clasp for easy size adjustment.
• Movement: Japanese quartz movement (VD53 Caliber) for precise timekeeping.
• Subdials: Functional subdials for 60-minute, 60-second, and 24-hour tracking.
• Date Display: Accurately keeps track of the date with an easily visible display.

Setup and Initial Use

Unboxing Your Watch

Your Invicta watch comes securely packaged in a durable box. Carefully open the packaging to retrieve your timepiece.

Figure 6: The Invicta watch presented in its yellow box.

Setting Time and Date

1. Unscrew the Crown: Gently unscrew the crown (located on the side of the watch) counter-clockwise until it releases from the case.
2. Pull to Position 2 (Date Setting): Pull the crown out to the first click position. Turn the crown clockwise or counter-clockwise to set the date.
3. Pull to Position 3 (Time Setting): Pull the crown out to the second click position. Turn the crown to set the hour and minute hands. Ensure the 24-hour subdial is correctly aligned for AM/PM.
4. Push and Screw Down the Crown: Once the time and date are set, push the crown back into the case and screw it down clockwise firmly to ensure water resistance.

Band Adjustment

The black silicone band is designed for comfort and durability. If adjustment is needed, it typically involves repositioning the buckle or, for significant changes, professional assistance may be required to cut the silicone band to size. Ensure the watch fits snugly but comfortably on your wrist.

Operating Your Watch

Basic Timekeeping

The watch features a traditional analog display with luminous hands and hour markers for visibility in various lighting conditions. The central hands indicate hours, minutes, and seconds.

Chronograph Function

The chronograph allows for precise timing of events. Your watch includes functional subdials for 60-minute, 60-second, and 24-hour measurements. Use the pushers located on either side of the crown to operate the chronograph:

1. Press the top pusher to start the chronograph.
2. Press the top pusher again to stop the chronograph.
3. Press the bottom pusher to reset the chronograph to zero.

Date Display

The date is displayed in a window on the watch face. Refer to the 'Setting Time and Date' section for instructions on how to adjust the date.

Maintenance and Care

Water Resistance

Your Invicta Bolt watch is water resistant to 200 meters (660 feet), making it suitable for professional marine activity and surface water sports, as well as diving. Always ensure the crown is fully screwed down before exposing the watch to water.

Figure 7: Water resistance guidelines for Invicta watches.

Battery Replacement

The watch uses one SR920SW Lithium Ion battery. When the battery needs replacement, it is recommended to have it replaced by a qualified watch technician to maintain the watch's water resistance and proper function.

Care and Cleaning

• Clean your watch regularly with a soft, damp cloth.
• Avoid exposing the watch to extreme temperatures or direct sunlight for prolonged periods.
• Keep the watch away from strong magnetic fields, as this can affect the accuracy of the quartz movement.
• The mineral crystal is scratch-resistant but not scratch-proof; avoid abrasive surfaces.

Troubleshooting

If you experience any issues with your watch, consider the following common solutions:

• Watch not running: Check if the crown is fully pushed in and screwed down. If the watch still does not run, the battery may need replacement.
• Incorrect time/date: Refer to the 'Setting Time and Date' section to reset.
• Water ingress: If moisture appears inside the watch, immediately take it to an authorized service center. Do not attempt to open the watch yourself.

For more complex issues, please contact Invicta customer support or an authorized service center.

Specifications

Warranty and Support

Invicta offers a warranty for its products. To register your watch and potentially extend your warranty, please visit the official Invicta warranty registration page. You can also scan the QR code provided on the watch packaging for direct access.

Figure 8: Invicta warranty information card.

For warranty registration and manual access, visit: www.invictaservice.com/manual/

For customer support, you may contact Invicta through their official website or the contact information provided in your watch's packaging.

General Information