Introduction
This instruction manual provides detailed guidance for the installation, operation, and maintenance of your SENSEA DOCCE 5-Jet Chrome Shower Set. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product. Keep this manual for future reference.
Package Contents
Verify that all components are present and undamaged before beginning installation. The SENSEA DOCCE Shower Set includes the following items:
- Shower bar
- Adjustable shower head holder
- Soap dish
- 175 cm anti-twist PVC shower hose
- DOCCE 5-jet shower head (ABS plastic, chrome finish)
- Mounting hardware (screws, wall plugs, seals)
Image: All components included in the SENSEA DOCCE Shower Set package, laid out for inspection. This includes the shower head, hose, shower bar, soap dish, and mounting accessories.
Setup and Installation
Installation should be performed by a qualified professional if you are unsure about any steps. Ensure the water supply is turned off before starting the installation process.
- Prepare the Installation Area: Choose a suitable location on the wall for the shower bar. Ensure it is within reach and allows for comfortable use of the shower head.
- Mark Drilling Points: Hold the shower bar against the wall at the desired height. Use a pencil to mark the positions for the mounting brackets. Refer to the dimension diagram for optimal placement and maximum adjustment range.
- Drill Holes: Using an appropriate drill bit for your wall type, drill holes at the marked points. Insert the wall plugs into the drilled holes.
- Attach Mounting Brackets: Secure the mounting brackets to the wall using the provided screws.
- Install Shower Bar: Slide the shower bar into the secured mounting brackets. Tighten any retaining screws to hold the bar firmly in place.
- Attach Soap Dish and Shower Head Holder: Slide the soap dish and the adjustable shower head holder onto the shower bar. Position them as desired.
- Connect Shower Hose: Connect one end of the 175 cm anti-twist shower hose to your existing shower mixer/faucet outlet and the other end to the DOCCE shower head. Ensure all connections are hand-tightened and sealed with the provided washers.
- Mount Shower Head: Place the shower head into its holder on the shower bar.
- Test for Leaks: Turn on the water supply and check all connections for leaks. If any leaks are detected, tighten the connections further.
Image: Technical diagram illustrating the dimensions and installation points for the SENSEA DOCCE Shower Set, including the 175 cm hose length and adjustable shower bar height.
Operating Instructions
The SENSEA DOCCE shower head offers 5 distinct spray patterns and features for water conservation.
- Adjusting Spray Patterns: Rotate the selector on the shower head to cycle through the 5 available spray patterns:
- Rain
- Massage
- Foam
- Mixed
- Drops
- Eco-Stop Function: The shower head is equipped with an Eco-Stop function. This allows you to temporarily pause the water flow without changing the set temperature or spray pattern. To activate/deactivate, press the button or lever on the shower head (refer to image for specific location). This feature can reduce water consumption by up to 15%.
- Adjusting Shower Head Height: The shower head holder can be easily adjusted up or down the shower bar to suit individual preferences. Simply press the release button or lever on the holder and slide it to the desired position.
Image: Close-up view of the SENSEA DOCCE shower head, highlighting the selector for changing spray patterns and the silicone nozzles.
Image: Icons representing key features of the SENSEA DOCCE Shower Set, including water saving (15%), easy-clean silicone nozzles, pause function, adjustable height, and a 5-year guarantee.
Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your shower set.
- Daily Cleaning: After each use, wipe the chrome surfaces with a soft, damp cloth to prevent water spots and soap scum buildup.
- Deep Cleaning: For more thorough cleaning, use a mild soap solution and a soft cloth. Rinse thoroughly with clean water and dry immediately.
- Avoid Harsh Cleaners: Do not use abrasive cleaners, scouring pads, or cleaning products containing chlorine, acids, or harsh chemicals. These can damage the chrome finish and other components.
- Limescale Removal: The shower head is equipped with silicone nozzles designed to reduce limescale buildup. To remove any accumulated limescale, gently rub the silicone nozzles with your finger or a soft brush. For stubborn deposits, a mild descaling solution specifically designed for bathroom fixtures can be used, following the manufacturer's instructions.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water leaks from connections | Loose connections or worn washers. | Ensure all connections are tightened properly. Check and replace washers if they appear worn or damaged. |
| Reduced water flow from shower head | Limescale buildup in nozzles or internal blockage. | Gently rub the silicone nozzles to dislodge limescale. If flow remains low, disconnect the shower head and check for blockages in the filter or internal components. Clean as necessary. |
| Shower head holder slides down the bar | Holder not securely tightened or internal mechanism worn. | Ensure the holder's locking mechanism is fully engaged. If the issue persists, the holder may need replacement. |
If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact SENSEA customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 14623245 |
| Product Dimensions | 72 x 23 x 9 cm |
| Product Weight | 1.21 kg |
| Color | Chrome |
| Style | DOCCE |
| Finish | Polished |
| Materials | Chrome, Silicone Rubber, PVC, Metal, ABS Plastic (handle) |
| Number of Handles | 1 |
| Mounting Type | Wall Mounting |
| Shower Hose Length | 175 cm |
| Spray Patterns | 5 (Rain, Massage, Foam, Mixed, Drops) |
| Water Saving Feature | Eco-Stop function (-15% water saving) |
| Water Consumption (Rain mode, 3 bar) | 12 l/min |
| Spare Parts Availability (EU) | 5 Years |
Warranty and Support
The SENSEA DOCCE 5-Jet Chrome Shower Set comes with a 5-year warranty from the date of purchase. This warranty covers manufacturing defects and material faults under normal use conditions.
For warranty claims, technical assistance, or any questions regarding your product, please contact SENSEA customer support through your retailer or the official SENSEA website. Please have your proof of purchase and model number (14623245) ready when contacting support.
For more information about SENSEA products, visit the official brand store: SENSEA Brand Store
