Instruction Manual
Maxima Sausage Warmer - Model 09300580
For Model: 09300580
1. Introduction
This manual provides essential information for the safe and efficient operation, maintenance, and care of your Maxima Sausage Warmer, Model 09300580. Please read these instructions thoroughly before initial use and retain them for future reference. This robust hot dog warmer is designed to keep sausages warm for hot dogs, featuring a stainless steel lid to prevent heat loss from the glass cylinder.
2. Safety Instructions
WARNING: Failure to follow these safety instructions may result in fire, electric shock, or personal injury.
- Always ensure the appliance is connected to a grounded power outlet with the correct voltage.
- Do not immerse the main unit (base) in water or any other liquid.
- Keep hands and face away from the steam vent during operation. Hot steam can cause burns.
- The glass cylinder and metal parts will become hot during operation. Use heat-resistant gloves or handles when handling.
- Unplug the appliance from the power outlet before cleaning or when not in use.
- Do not operate the appliance if the power cord or plug is damaged, or if the appliance malfunctions or has been damaged in any way. Contact qualified service personnel for repair.
- This appliance is intended for commercial use. Keep out of reach of children.
- Ensure adequate ventilation around the appliance during use.
- Only use the appliance for its intended purpose of warming sausages.
3. Product Overview and Components
The Maxima Sausage Warmer consists of several key components designed for efficient and safe operation.
Image: All components of the Maxima Sausage Warmer laid out, including the main base unit, glass cylinder, sausage basket, water tray, and stainless steel lid.
- Main Base Unit: Contains the heating element, control knob, and power switch.
- Water Tray: A removable tray that sits on the heating element, designed to hold water for steam generation.
- Glass Cylinder: A transparent cylinder that sits on the water tray, allowing visibility of the sausages.
- Sausage Basket/Rack: A metal basket placed inside the glass cylinder to hold sausages.
- Stainless Steel Lid: Covers the glass cylinder to retain heat and steam.
- Temperature Control Knob: Used to adjust the heating temperature.
- Power Switch: On/Off switch for the appliance.
Image: The Maxima Sausage Warmer fully assembled, showing the base unit, glass cylinder, and lid.
4. Setup
- Unpacking: Carefully remove all components from the packaging. Inspect for any damage. Report any damage to your supplier immediately.
- Initial Cleaning: Before first use, wash the glass cylinder, sausage basket, water tray, and stainless steel lid with warm soapy water. Rinse thoroughly and dry completely. The main base unit should only be wiped with a damp cloth.
- Placement: Place the main base unit on a stable, level, heat-resistant surface. Ensure there is adequate space around the unit for ventilation.
- Assembly:
- Place the clean water tray into the designated recess on the main base unit.
- Carefully place the glass cylinder onto the water tray.
- Insert the sausage basket into the glass cylinder.
- Place the stainless steel lid on top of the glass cylinder.
- Power Connection: Ensure the power switch is in the "OFF" position. Plug the power cord into a suitable grounded electrical outlet.
5. Operating Instructions
- Fill Water Tray: Remove the glass cylinder and sausage basket. Fill the water tray with approximately 1-2 cm of clean water. Do not overfill.
- Load Sausages: Place the sausages into the sausage basket. Do not overload the basket.
- Reassemble: Carefully place the sausage basket with sausages back into the glass cylinder, then place the glass cylinder onto the water tray. Cover with the stainless steel lid.
- Power On: Turn the power switch to the "ON" position. The indicator light will illuminate.
- Set Temperature: Rotate the temperature control knob to your desired heat setting. Allow sufficient time for the water to heat and produce steam, typically 15-20 minutes.
- Warming: The steam generated will gently warm the sausages. The appliance is designed to keep pre-cooked sausages warm. If heating from cold, it may take longer.
- Serving: Use tongs to carefully remove sausages from the basket. Be cautious of hot steam and hot surfaces.
- Shut Down: When finished, turn the temperature control knob to the minimum setting, then turn the power switch to "OFF". Unplug the appliance from the power outlet and allow it to cool completely before cleaning.
Image: Front view of the Maxima Sausage Warmer, highlighting the power switch and temperature control knob.
6. Cleaning and Maintenance
Regular cleaning and proper maintenance will ensure the longevity and optimal performance of your Maxima Sausage Warmer.
- Always unplug the appliance and allow it to cool completely before cleaning.
- Removable Parts: The glass cylinder, sausage basket, and stainless steel lid are dishwasher safe.
- Water Tray: The water tray must be washed by hand with warm soapy water. Do not place it in a dishwasher. Rinse thoroughly and dry completely to prevent mineral buildup.
- Main Base Unit: Wipe the exterior of the main base unit with a damp cloth. For stubborn stains, use a mild detergent. Do not use abrasive cleaners or scourers, as they can damage the stainless steel finish. Never immerse the base unit in water.
- Descaling: Over time, mineral deposits may build up in the water tray. To descale, fill the tray with a solution of equal parts white vinegar and water. Let it sit for 30 minutes, then scrub gently with a non-abrasive brush. Rinse thoroughly.
- Storage: Store the clean and dry appliance in a cool, dry place, away from direct sunlight and moisture.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Appliance does not turn on. | No power supply; Power switch is off; Damaged power cord. | Check power outlet; Ensure power switch is ON; Inspect power cord for damage, if damaged, contact service. |
| Sausages are not warming sufficiently. | Insufficient water in tray; Temperature setting too low; Lid not properly sealed. | Add water to the tray; Increase temperature setting; Ensure lid is securely placed. |
| Excessive steam or boiling noise. | Too much water in tray; Temperature setting too high. | Reduce water level; Lower temperature setting. |
| Mineral buildup in water tray. | Hard water usage; Infrequent cleaning. | Descale the water tray as per cleaning instructions. Use filtered water if possible. |
8. Specifications
- Model Number: 09300580
- Brand: Maxima
- Manufacturer: Maxima Kitchen Equipment
- Product Dimensions (L x W x H): 36 x 36 x 46 cm
- Weight: 7 kilograms
- Spare Parts Availability: Information unavailable
9. Warranty and Support
For warranty information, please refer to the terms and conditions provided at the time of purchase or contact your retailer. Maxima Kitchen Equipment strives to provide high-quality products. For technical support or inquiries regarding spare parts, please contact Maxima customer service directly or visit their official website.
Note: No specific warranty details were provided in the product data. Please consult your purchase documentation.
10. Official Product Videos
No official product videos from the seller were found in the provided data. Please refer to the images and text instructions for guidance.
