HEAD Advantage Quartz Watch HE-002-02 User Manual

Introduction

This manual provides comprehensive instructions for the setup, operation, and maintenance of your HEAD Advantage Quartz Watch, model HE-002-02. Please read this manual thoroughly to ensure proper use and longevity of your timepiece.

Image: Front view of the HEAD Advantage Quartz Watch with a blue dial and silicone band.

Components

Your HEAD Advantage Quartz Watch consists of the following main components:

• Watch Case: Metallic casing housing the movement and dial.
• Dial: Blue face with hour markers and hands.
• Crown: Located on the side of the watch, used for setting time.
• Watch Band: Blue silicone band for comfortable wear.
• Movement: Quartz movement for accurate timekeeping.

Setup

Setting the Time

1. Pull out the Crown: Gently pull the crown (the small knob on the side of the watch) out to the first position.
2. Adjust the Time: Rotate the crown clockwise or counter-clockwise to set the hour and minute hands to the correct time.
3. Push in the Crown: Once the time is set, push the crown back into its original position to start the watch movement. Ensure the crown is fully pushed in to maintain water resistance.

Battery Information

The watch comes with one product-specific battery included and pre-installed. When the battery requires replacement, it is recommended to seek professional watch service to ensure proper sealing and maintain water resistance.

Operating Instructions

Water Resistance

This watch is water resistant to 100 meters (330 feet). This rating makes it suitable for swimming and snorkeling. It is not suitable for diving activities.

• Do not operate the crown or pushers while the watch is wet or submerged.
• Ensure the crown is fully pushed in after setting the time to maintain water resistance.
• Avoid exposing the watch to extreme temperature changes, which can affect its water resistance.

General Use

Wear the watch comfortably on your wrist. The silicone band is designed for durability and comfort during daily activities.

Image: The HEAD Advantage Quartz Watch displayed on a wrist, showing its fit and appearance during wear.

Maintenance

Cleaning

• Wipe the watch case and band with a soft, damp cloth.
• For stubborn dirt on the silicone band, a mild soap solution can be used, followed by rinsing with clean water and thorough drying.
• Avoid using harsh chemicals or abrasive materials, as these can damage the watch's finish.

Storage

When not in use, store your watch in a cool, dry place, away from direct sunlight and extreme temperatures. The original packaging box can be used for storage.

Image: The black HEAD branded box, suitable for storing the watch when not in use.

Troubleshooting

• Watch Not Running: Check if the crown is fully pushed in. If it is, the battery may need replacement.
• Incorrect Time: Follow the "Setting the Time" instructions in the Setup section.
• Condensation Under Crystal: This may indicate a loss of water resistance. Avoid further exposure to water and seek professional service immediately.

Specifications

Image: A visual guide illustrating various watch case diameters for size comparison.

Warranty and Support

Warranty Information

Your HEAD Advantage Quartz Watch is covered by a 1-year limited manufacturer's warranty. This warranty covers manufacturing defects under normal use.

Customer Support

For warranty claims or technical assistance, please contact the seller of record or refer to the official HEAD website for support contact information.