1. Introduction
Thank you for choosing the Beko DTC36610W Countertop Dishwasher. This manual provides important information regarding the installation, operation, and maintenance of your appliance. Please read this manual thoroughly before using the dishwasher to ensure safe and efficient operation.
1.1. Product Overview
The Beko DTC36610W is a compact countertop dishwasher designed for convenience and efficiency. It features a 6-place setting capacity, multiple wash programs, and a quiet operation level of 49 dB. Its compact design makes it suitable for smaller kitchens or as an additional dishwasher.
Figure 1: Front view of the Beko DTC36610W Countertop Dishwasher. This image shows the compact design and white finish of the appliance.
1.2. Safety Information
- Always disconnect the appliance from the power supply before cleaning or performing maintenance.
- Do not operate the dishwasher if it is damaged or malfunctioning.
- Keep detergents and rinse aid out of reach of children.
- Ensure proper grounding to prevent electrical shock.
- Do not open the door during operation, especially during the heating cycle, to avoid hot water or steam exposure.
- This appliance is intended for household use only.
2. Setup
2.1. Unpacking
Carefully remove all packaging materials. Inspect the dishwasher for any damage that may have occurred during transit. Report any damage to your retailer immediately. Ensure all accessories, such as the cutlery basket and hoses, are present.
2.2. Installation
- Placement: Place the dishwasher on a stable, level countertop near a water supply, drain, and electrical outlet. Ensure there is adequate space for door opening.
- Water Connection: Connect the water inlet hose to a cold water tap with a 3/4-inch thread. Ensure connections are tight to prevent leaks.
- Drain Connection: Connect the drain hose to a suitable drain pipe or sink. Ensure the drain hose is not kinked and is positioned to allow proper drainage.
- Electrical Connection: Plug the dishwasher into a grounded 240V electrical outlet. Do not use extension cords or adapters.
2.3. First Use
Before the first wash cycle, it is recommended to run an empty cycle with a small amount of detergent to clean the interior of the appliance.
3. Operating Instructions
3.1. Control Panel
The Beko DTC36610W features a touch control panel. Indicators typically include program selection, start/pause, and various status lights (e.g., rinse aid, salt, program progress).
3.2. Loading Dishes
- Scrape off large food particles from dishes before loading.
- Place dishes securely in the basket, ensuring they do not block the spray arms.
- Load larger items towards the back and sides, and smaller items in the cutlery basket.
- Ensure all items are dishwasher-safe.
3.3. Adding Detergent and Rinse Aid
- Detergent: Add the appropriate amount of dishwasher detergent to the dispenser. Refer to the detergent manufacturer's instructions.
- Rinse Aid: Fill the rinse aid dispenser when the indicator light illuminates. Rinse aid helps with drying and prevents spots.
3.4. Selecting and Starting a Wash Program
- Close the dishwasher door.
- Select the desired wash program using the program selection button. The dishwasher offers 3 cycles/options.
- Press the Start/Pause button to begin the cycle.
- To pause a cycle, press the Start/Pause button. To resume, press it again.
4. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your dishwasher.
4.1. Cleaning Filters
- The filter system should be checked and cleaned regularly (e.g., weekly).
- Twist the cylindrical filter counter-clockwise and remove it.
- Remove the fine filter and coarse filter.
- Rinse all filters under running water to remove food particles.
- Reassemble the filters in reverse order, ensuring they are securely in place.
4.2. Cleaning Spray Arms
Check the spray arm nozzles for blockages. If necessary, remove the spray arms and clean the holes with a thin object like a toothpick. Reattach securely.
4.3. Exterior and Interior Cleaning
- Exterior: Wipe the exterior surfaces with a damp cloth and mild detergent. Avoid abrasive cleaners.
- Interior: Periodically run a dishwasher cleaning cycle with a specialized dishwasher cleaner to remove grease and limescale buildup.
4.4. Winterization (for non-heated environments)
If the dishwasher is stored in an unheated area during winter, drain all water from the appliance to prevent freezing and damage. Disconnect water supply and drain hoses.
5. Troubleshooting
Before contacting service, review the following common issues and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher does not start | Power cord not plugged in; door not closed properly; program not selected. | Check power connection; ensure door is latched; select a program and press Start. |
| Dishes are not clean | Improper loading; clogged spray arms; insufficient detergent; incorrect program. | Reload dishes correctly; clean spray arm nozzles; use adequate detergent; select a more intensive program. |
| Water not draining | Clogged filter; kinked drain hose; drain pump issue. | Clean the filter system; straighten the drain hose; contact service if pump issue persists. |
| White spots on dishes | Lack of rinse aid; hard water. | Refill rinse aid dispenser; consider using a water softener or adjusting rinse aid dosage. |
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | DTC36610W |
| Brand | Beko |
| Installation Type | Countertop |
| Place Settings | 6 |
| Dimensions (L x W x H) | 55 x 50 x 43.8 cm (21.65 x 19.69 x 17.24 inches) |
| Weight | 21.5 kg (47.4 lbs) |
| Voltage | 240 Volts |
| Noise Level | 49 Decibels |
| Control Type | Touch |
| Material | Stainless Steel (interior), White (exterior) |
| Special Feature | Compact |
| Number of Cycles | 3 |
7. Warranty and Support
Specific warranty information for the Beko DTC36610W is not provided in this document. Please refer to the warranty card included with your product or contact Beko customer support for details regarding warranty coverage and service. For technical assistance or spare parts, please contact your local Beko service center.
Note: Availability of spare parts information is not provided in the product data.
