Seki Edge Stainless Steel Haircutting Scissors (SS-703) User Manual

Introduction

Thank you for choosing the Seki Edge Stainless Steel Haircutting Scissors (SS-703). These professional-quality scissors are crafted from drop-forged stainless steel with a cutting edge made and polished in Japan, designed for precision and durability. This manual provides essential information for the proper use, care, and maintenance of your new haircutting scissors to ensure long-lasting performance.

Safety Information

• Sharp Blades: The scissors feature extremely sharp blades. Handle with care to prevent injury.
• Storage: Always store the scissors in a protective case or a safe place, out of reach of children and pets.
• Intended Use: These scissors are designed for cutting hair only. Do not use them for other materials, as this can dull or damage the blades.
• Cleaning: Clean the blades carefully after each use. Avoid touching the sharp edges directly.

Product Overview

The Seki Edge SS-703 scissors are 5 1/2 inches long and feature a finger tang for enhanced control and comfort. The offset handles are ergonomically designed for a natural grip during use.

Image: Full view of the Seki Edge Stainless Steel Haircutting Scissors (SS-703), showcasing its sleek design and offset handles.

Image: A close-up view of the Seki Edge SS-703 scissors, highlighting the precision-ground blades and the central pivot mechanism.

Key Features:

• 5 1/2 inch length with finger tang
• Offset handles for ergonomic grip
• Cutting edge made and polished in Japan
• Drop Forged Stainless Steel construction
• Professional Quality

Usage Guidelines

Holding the Scissors:

Proper grip is crucial for control and precision. Insert your ring finger into one handle and your thumb into the other. Your pinky finger should rest on the finger tang for stability. Your index and middle fingers should rest on the top of the handle for balance and control over the blade.

Image: A person demonstrating the correct way to hold the Seki Edge haircutting scissors, showing finger placement for optimal control.

Cutting Techniques:

• Clean Hair: Always cut clean, dry, or slightly damp hair. Dirty hair can dull the blades.
• Small Sections: Work with small, manageable sections of hair for better control and even results.
• Blade Angle: Maintain a consistent blade angle relative to the hair section for uniform cuts.
• Smooth Motion: Use smooth, controlled cutting motions. Avoid forcing the blades through thick sections of hair.

Care and Maintenance

Cleaning:

After each use, wipe the blades clean with a soft, dry cloth to remove any hair or debris. For a more thorough cleaning, use a cloth lightly dampened with rubbing alcohol, then dry completely.

Oiling:

Periodically apply a small drop of scissor oil (not included) to the pivot screw area. Open and close the scissors several times to distribute the oil, then wipe off any excess. This helps maintain smooth operation and prevents corrosion.

Storage:

Store your scissors in a dry, safe place, preferably in a protective pouch or case, to prevent damage to the blades and accidental injury.

Sharpening:

Over time, even high-quality blades will require sharpening. It is recommended to have your Seki Edge scissors professionally sharpened by a qualified scissor sharpener to maintain their precision edge. Improper sharpening can damage the blades.

Troubleshooting

• Scissors feel dull: Ensure blades are clean. If dullness persists, professional sharpening may be required.
• Hair folds instead of cuts: This often indicates dull blades or improper cutting technique. Clean the blades, apply oil, and if the issue continues, consider professional sharpening.
• Blades feel stiff: Apply a small amount of scissor oil to the pivot point and work the blades open and closed to distribute the oil.

Specifications

Customer Support

For any questions, concerns, or support regarding your Seki Edge Stainless Steel Haircutting Scissors (SS-703), please contact the manufacturer or your retailer. Refer to your purchase documentation for specific warranty information.