ADJ Entour Snow Machine User Manual

1. Introduction

The ADJ Entour Snow is a professional-grade, high-output snow machine designed for various applications including stage productions, large venues, and special effects. This manual provides essential information for the safe and efficient operation, setup, maintenance, and troubleshooting of your Entour Snow machine.

Please read these instructions thoroughly before operating the device to ensure proper usage and to prevent damage or injury.

2. Product Features

The Entour Snow machine incorporates several features designed for professional performance and ease of use:

• High-Output Snow Projection: Capable of projecting imitation snow upwards to a distance of up to 10 meters and outwards across a distance of up to 12 meters.
• Variable Output Control: Fan operates at 50% or 100% for adjustable snow intensity.
• DMX Control: Features 3-pin and 5-pin XLR sockets for DMX control, offering DMX Channel Modes 1, 3, and 5.
• Integrated Timer: An inbuilt timer allows for automated operation.
• Remote Control Option: A 1/4-inch jack socket is provided for use with an optional remote control.
• Robust Construction: Constructed with an all-metal casing for durability in touring and storage environments.
• Fluid Tank Capacity: Equipped with a 5.6-liter external fluid tank.
• Power Input: Utilizes a locking PowerCON input socket for secure mains supply.

Figure 2.1: Front view of the ADJ Entour Snow Machine, showcasing its robust design and fluid tank.

3. Setup

Follow these steps to set up your Entour Snow machine:

1. Unpacking: Carefully remove the machine from its packaging. Inspect for any damage that may have occurred during shipping. Contact your dealer immediately if any damage is found.
2. Placement: Position the snow machine on a stable, level surface or mount it securely using the built-in hanging bracket. Ensure adequate clearance around the output nozzle for snow dispersion.
3. Fluid Installation:
   • Locate the 5.6-liter external fluid tank.
   • Fill the tank with ADJ-approved snow fluid. Using non-approved fluids may damage the machine and void the warranty.
   • Securely attach the fluid hose from the machine to the fluid tank cap, ensuring a tight seal.
4. Power Connection: Connect the locking PowerCON input cable to the machine and then to a suitable power outlet. Ensure the power switch is in the 'OFF' position before connecting.
5. DMX Connection (Optional): If using DMX control, connect your DMX controller to the machine's 3-pin or 5-pin XLR DMX input. Connect additional DMX devices via the DMX output.
6. Remote Control Connection (Optional): If using an optional wired remote, connect it to the 1/4-inch jack socket.

Figure 3.1: View of the fluid tank connection and internal mechanism, crucial for proper fluid installation.

Figure 3.2: Rear panel showing the PowerCON input, DMX XLR sockets, and remote control jack for setup.

4. Operating Instructions

Once the machine is set up, follow these steps for operation:

1. Power On: Flip the main power switch to the 'ON' position. The LCD function display will illuminate.
2. Warm-up: The Entour Snow machine requires no warm-up time. It is ready for immediate operation.
3. Manual Control: Use the controls on the machine's display or the optional wired remote to manually activate snow output.
4. Variable Fan Output: Adjust the fan speed to 50% or 100% to control the intensity and projection distance of the snow.
5. Timer Mode: Utilize the built-in remote timer for automated snow bursts. Configure the duration of snow output and the interval between bursts as needed.
6. DMX Control: If connected to a DMX controller, refer to the DMX channel chart (typically found in a separate DMX manual or product sheet) to control the machine's functions, including output intensity and fan speed. The machine supports DMX Channel Modes 1, 3, and 5.
7. Power Off: When finished, turn the main power switch to the 'OFF' position and disconnect the power cable.

Figure 4.1: The Entour Snow Machine in operation, demonstrating its capability to project imitation snow over a wide area.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your Entour Snow machine:

• Fluid Management: Always use high-quality, ADJ-approved snow fluid. Using inferior or incorrect fluids can lead to clogs and damage.
• Cleaning the Fluid System: After every 40 hours of continuous operation, or if the machine will be stored for an extended period, run a cleaning solution through the system. This involves emptying the snow fluid, filling the tank with distilled water, and running the machine for 5-10 minutes to flush out any residue.
• Exterior Cleaning: Clean the exterior casing with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Nozzle Inspection: Periodically inspect the output nozzle for any blockages. Clear any obstructions carefully.
• Storage: Store the machine in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the fluid system is cleaned before long-term storage.

6. Troubleshooting

If you encounter issues with your Entour Snow machine, refer to the following troubleshooting guide:

If the problem persists after attempting these solutions, please contact ADJ Products customer support for further assistance.

7. Specifications

Detailed technical specifications for the ADJ Entour Snow Machine:

• Model: ENTOUR SNOW
• Product Dimensions: 25 x 20 x 15 inches (63.5 x 50.8 x 38.1 cm)
• Item Weight: 37 pounds (16.78 kg)
• Color: Black
• Fluid Tank Capacity: 5.6 liters
• Fluid Consumption Rate: 500ml/minute (at maximum output)
• Power Consumption: 1250W
• DMX Channels: 1, 3, and 5 modes
• Control: DMX, Manual, Built-in Timer, Optional Wired Remote
• Warm-up Time: None
• First Available Date: June 12, 2017

8. Warranty and Support

For warranty information, service, or technical support, please contact ADJ Products directly. Keep your purchase receipt as proof of purchase for any warranty claims.

You can visit the official ADJ Products website for the latest support information and contact details: www.adj.com