VR SHINECON VRG01P Virtual Reality Glasses User Manual

Introduction

This manual provides instructions for the proper setup, operation, and maintenance of your VR SHINECON VRG01P Virtual Reality Glasses. Please read this manual thoroughly before use to ensure optimal performance and user experience.

A front-facing view of the VR SHINECON VRG01P Virtual Reality Headset, showcasing its black design and adjustable head straps.

Product Components

The VR SHINECON VRG01P package includes the following items:

• VR SHINECON VRG01P Virtual Reality Headset

The VR SHINECON VRG01P Virtual Reality Headset displayed alongside its retail packaging and the included user manual, illustrating the complete product contents.

Setup Instructions

1. Smartphone Preparation

   Before inserting your smartphone, ensure it is prepared for VR use:

   • Remove any protective phone cases.
   • Activate split-screen mode for VR content on your smartphone.
   • Ensure your smartphone screen size is between 4.7 and 6.0 inches for compatibility.

2. Lens Preparation

   For the best visual clarity:

   • Remove any protective film from the lenses.
   • Gently wipe the lenses with a soft, dry cloth (e.g., a microfiber cloth) to remove dust or smudges.

3. Inserting Your Smartphone

   Open the front cover of the headset and carefully place your smartphone into the designated holder. Ensure it is centered and securely held.

4. Adjusting the Headset

   Place the headset on your head and adjust the head straps for a comfortable and secure fit.

   If you wear prescription glasses, place your glasses inside the VR headset first, then wear the entire assembly on your head.

5. Focus and Interpupillary Distance (IPD) Adjustment

   Use the adjustment dials on the headset to fine-tune the focus and IPD until the image is clear and comfortable for your eyes.

Operating Instructions

Once your smartphone is securely in place and the headset is adjusted, launch your preferred VR application or 3D video content.

The VR SHINECON VRG01P is designed for immersive viewing of 3D videos, movies, and games.

For optimal experience, ensure your content is specifically designed for VR headsets and that your smartphone is in split-screen mode.

Maintenance

1. Cleaning the Lenses

   Regularly clean the lenses with a soft, dry microfiber cloth. Avoid using liquid cleaners or abrasive materials.

2. Cleaning the Headset Body

   Wipe the exterior of the headset with a slightly damp cloth. Do not immerse the headset in water.

3. Front Cover Usage

   The front cover serves as a dustproof cap. For extended use or to prevent smartphone overheating, it is recommended to remove the front cover during operation for better ventilation.

Troubleshooting

• Blurry Image

  Adjust the focus and IPD dials until the image is clear. Ensure lenses are clean and free of protective film. Verify your smartphone is centered correctly within the holder.

• Smartphone Not Fitting / Overheating

  Ensure your phone case is removed. Check if your smartphone size is within the 4.7-6.0 inch range. If overheating occurs, remove the front cover for better ventilation.

• No 3D Effect

  Confirm that the content you are viewing is specifically designed for VR (split-screen format). Ensure your smartphone is in split-screen mode before inserting it into the headset.

Specifications

Warranty and Support

For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. Specific warranty terms are not provided in this manual.

You can also visit the official VR SHINECON store for more product information and support:

Visit the VR SHINECON Store