Introduction
The Whirlpool WHAROS5 Reverse Osmosis (RO) Water Filtration System is designed to provide safer, cleaner, and better-tasting water for your home. This system is NSF certified to reduce up to 15 common contaminants found in drinking water, including copper, cysts, lead, sodium, and chloride. This manual provides essential information for the proper setup, operation, and maintenance of your WHAROS5 system.
Key Features
- NSF Certified Contaminant Removal: Reduces up to 15 individual contaminants for safer drinking water.
- Improved Water Taste: Effectively removes odor-causing agents for cleaner and fresher-tasting water.
- EZ-Change Indicator Light: Provides a visual alert when it's time to replace filters, eliminating guesswork.
- UltraEase Filter Replacement: Allows for quick and easy filter changes in seconds without needing to shut off the water supply.
- Modern Faucet Design: Includes a designer chrome faucet to complement your kitchen sink.
Setup and Installation
The Whirlpool WHAROS5 system is designed for under-sink installation. It comes with all necessary components for a complete setup.
Included Components
- WHAROS5 System Unit
- Dedicated Filtered Water Faucet (Chrome)
- One 6-month Filter Set (WHEERF)
- One 1-3 year Reverse Osmosis Membrane (WHEERM)
- Water Storage Tank
- Installation Fittings
- Color-Coded Tubing
- Push-in Connectors
System Dimensions
The main unit dimensions are approximately 14"L x 13"W x 15"H. Ensure adequate space under your sink for installation of both the main unit and the water storage tank.
Image: Diagram showing the dimensions of the Whirlpool WHAROS5 system, measuring 14 inches deep, 13 inches wide, and 15 inches tall.
Image: The Whirlpool WHAROS5 Reverse Osmosis system and its white storage tank neatly installed inside a kitchen cabinet under the sink, with color-coded tubing visible.
For detailed installation instructions, refer to the separate installation guide provided with your product. It is recommended to have a qualified professional perform the installation if you are unfamiliar with plumbing work.
Operating Principles
How Reverse Osmosis Works
Reverse osmosis filtration operates by applying high pressure to the incoming water supply. This pressure forces pre-filtered water through a semipermeable membrane. This membrane effectively separates dissolved contaminants from the water, leaving them behind. The purified water then passes through an additional filter before being stored in a dedicated tank, ready for dispensing through your home's faucet.
Image: A front-facing view of the Whirlpool WHAROS5 Reverse Osmosis system, showcasing its compact design and the visible filter cartridges.
Image: A rear view of the Whirlpool WHAROS5 Reverse Osmosis system, highlighting the color-coded water inlet and outlet connections for easy identification during installation.
Maintenance
Filter Replacement
Regular filter replacement is crucial for maintaining the performance and water quality of your WHAROS5 system. The system features an EZ-Change Indicator Light that signals when it's time to change your filters.
The UltraEase Filter Replacement system simplifies this process: you do not need to shut off your water supply. Simply turn the filter cartridge a quarter turn to release it, replace it with a new filter, and reverse the quarter turn until it clicks securely into place.
Filter Lifespan:
- WHEERF (Pre/Post Filter): Approximately 6 months.
- WHEERM (Reverse Osmosis Membrane): Approximately 1-3 years.
Image: Two white Whirlpool UltraEase Series WHEERF pre/post filter cartridges, labeled for 6-month filter life.
Image: A single white Whirlpool UltraEase Series WHEERM reverse osmosis membrane filter, labeled for 2-year filter life.
Troubleshooting
Low Water Pressure from Faucet
If you experience a decrease in water pressure from your RO faucet, it is often an indication that one or more filters are becoming clogged. The most common cause of reduced flow is a saturated pre-filter (WHEERF) due to sediment and other particles in the incoming water.
- Check EZ-Change Indicator Light: If illuminated, replace the indicated filter.
- Inspect Pre-Filter: If the indicator light is not on, consider inspecting and potentially replacing the pre-filter first, as it handles the initial and heaviest load of contaminants.
- Ensure Proper Installation: Verify that all connections are secure and tubing is not kinked.
- Tank Pressure: Ensure the water storage tank has adequate pressure. Consult the full installation guide for details on checking and adjusting tank pressure.
If issues persist after checking these points, contact Whirlpool customer support for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Brand | Whirlpool |
| Model Name | WHAROS5 |
| Special Feature | NSF certified |
| Product Dimensions | 14"L x 13"W x 15"H |
| Installation Type | Under Sink |
| Purification Method | Reverse Osmosis |
| Material | Plastic |
| Capacity | 18.46 Gallons (Storage Tank) |
| Supported Water TDS Level Maximum | 600 PPM |
| Item Weight | 12.67 pounds |
| Manufacturer | KX Technologies |
| Date First Available | June 6, 2017 |
Image: A chart detailing the contaminants reduced by various Whirlpool undersink filtration systems, including the Reverse Osmosis Filtration System (WHAROS5) which reduces chlorine taste & odor, sediment, cysts, lead, chemicals, dissolved solids, bacteria & viruses, and pharmaceuticals.
Warranty and Support
Lifetime Warranty Eligibility
To become eligible for the Whirlpool lifetime warranty, you must purchase and replace your filters as recommended. After registering your product and uploading the original receipt, you will receive email reminders to change your system's filters, ensuring your eligibility for the lifetime warranty.
For further support, product registration, or to purchase replacement filters, please visit the official Whirlpool website or contact their customer service.
