1. Product Overview
The JJC Camera Strap Round Lug Rings (Model: JW-NS-OA1) are designed to facilitate the attachment of a neck strap to cameras equipped with small eyelets. This accessory is compatible with most standard camera straps up to 12mm in width. Each set includes two durable metal split O-rings and two protective leather covers, ensuring a secure and scratch-free connection between your camera and strap.
Image: The JJC Camera Strap Eyelet Lug Split O Ring Adapter & Leather Cover set, showing the metal rings and leather protectors, with an example of the adapter installed on a camera body.
2. Package Contents
Your package should contain the following items:
- 2 x Round Split O-Rings (metal)
- 2 x Anti-Scratch Leather Covers
Image: A clear view of the two metal split O-rings and two black leather protective covers included in the package.
Image: Detailed view of a metal split O-ring, indicating its inner diameter of 12mm and outer diameter of 15mm.
Image: Front view of one of the black leather protective covers, designed to prevent scratches.
Image: Back view of one of the black leather protective covers, highlighting its textured surface for grip and protection.
3. Setup and Installation
Follow these steps to correctly attach the adapter and your camera strap:
- Step 1: Place the protective leather. Position the protective leather cover over the camera's eyelet.
- Step 2: Attach the circle ring. Gently open the circle ring with your fingers and hook the camera strap eyelet into the opening of the ring.
- Step 3: Secure the ring. Rotate the ring clockwise to fully pass it through the eyelet until it clicks closed, ensuring it is securely fastened.
- Step 4: Insert the strap. Place the backside of your camera strap facing upwards. Insert the strap through the protective leather cover and the circle ring, feeding it from the bottom upwards.
- Step 5: Fasten the strap. Adjust and fasten the strap according to its design, ensuring it is tight and secure.
Image: A visual step-by-step guide illustrating the installation process of the JJC Camera Strap Eyelet Lug Split O Ring Adapter and Leather Cover.
Important Tip: To prevent accidental camera drops, always double-check that the split O-ring and the camera strap are correctly and securely attached before use.
4. Operating and Compatibility
Once installed, the JJC Camera Strap Round Lug Rings allow you to use a wider variety of camera straps with cameras that typically have small eyelets. The smooth metal rings facilitate easy movement of the strap, reducing tangles and improving handling. The leather covers provide essential protection, preventing the metal rings from scratching your camera body and minimizing noise.
This adapter is compatible with a wide range of cameras including, but not limited to:
- Leica: Q3, D-lux7, D-lux6, D-lux (Type 109), C-lux
- Fujifilm: GFX 100S, GFX 100, GFX 50R, X-H1, X-Pro3, X-Pro2, X-Pro1, X-T4, X-T3, X-T2, X-T1, X-T30, X-T20, X-T10, X-E4, X-E3, X-E2S, X-E2, X-E1
- Sony: ZV-E10, A1, A7C, A9II, A9, A7RIV, A7SIII, A7RIII, A7III, A7RII, A7SII, A7II, A7R, A7S, A7, A6600, A6500, A6400, A6300, A6100, A6000, A5100, A5000, RX10 IV, RX10 III, RX10 II, RX1R II, A99, A99II, A77, A77II, A68
- Canon: M50, M200, M100, M6 Mark II, M6, M5, M3, G1 X Mark III, G5 X, G7 X Mark III, G7 X Mark II, G9 X Mark II
- Nikon: Zfc, Z5, Z6II, Z7II, Z50, Z7, Z6
- Olympus: E-M5 & Mark II, E-M10 & Mark III, E-M10 Mark II, E-M1 & Mark III, E-M1 Mark II, E-PL10, E-PL9, E-PL8, E-PL7, E-PL6, E-PL5, E-PL4, E-PL3, E-PL2
- Panasonic: Lumix DC-S1, S1R, S1H, LX100, LX100II, LX10, G95, G9, G85, G7, GH5, GH4, GF10, GF9, GF8, GF7, GX9, GX85, GX8, GX7, ZS220, ZS200
- And other cameras with small eyelets.
Image: A camera with the JJC adapter and a camera strap properly installed, showing the side view of the setup.
Image: A camera with the JJC adapter and strap installed, providing a broader view of the camera body and strap attachment.
5. Maintenance
To ensure the longevity and optimal performance of your JJC Camera Strap Eyelet Lug Split O Ring Adapter and Leather Cover, consider the following maintenance tips:
- Regular Inspection: Periodically check the metal rings for any signs of wear, deformation, or corrosion. Ensure they remain securely closed.
- Leather Care: The leather covers protect your camera. Keep them clean and dry. If they become dirty, wipe them gently with a soft, damp cloth and allow them to air dry completely. Avoid harsh chemicals.
- Storage: When not in use, store the adapters in a clean, dry place away from extreme temperatures and direct sunlight.
- Avoid Overloading: While durable, these adapters are designed for camera straps. Avoid using them for purposes that might exceed their intended load capacity.
6. Troubleshooting
If you encounter any issues with your JJC Camera Strap Eyelet Lug Split O Ring Adapter, consider the following:
- Ring Not Closing Securely: Ensure the camera eyelet is clean and free of debris. Carefully re-attempt to thread the ring through the eyelet, rotating it until it clicks into place. Do not force it.
- Strap Slipping: Verify that your camera strap is correctly threaded through both the leather cover and the metal ring, and that the strap's fastening mechanism is properly engaged. The adapter is designed for straps up to 12mm in width.
- Scratches on Camera Body: Confirm that the leather protective cover is correctly positioned between the metal ring and the camera body. The leather cover is specifically designed to prevent metal-on-metal contact.
- Difficulty Attaching: If you find it difficult to open the split ring, use a small, flat tool (like a thin screwdriver or a guitar pick) to gently pry open the gap just enough to start threading it onto the eyelet. Exercise caution to avoid scratching the ring or camera.
If problems persist, please refer to the support information in Section 8.
7. Specifications
| Model Number | JW-NS-OA1 |
| Package Dimensions | 4.45 x 3.35 x 0.87 inches |
| Item Weight | 2.47 ounces |
| Material | Premium Metal (Rings), Leather (Covers) |
| Strap Width Compatibility | ≤ 12mm |
| Manufacturer | JJC Photography Equipment Co.,Ltd. |
8. Warranty and Support
JJC is committed to providing high-quality photography equipment and accessories. For any product inquiries, technical support, or warranty information, please contact JJC directly through their official channels.
You can find more information about JJC products and support on their official website: www.jjc.cc
JJC strives to offer excellent products and services to its customers, continuously developing the latest innovations to meet photographers' demands.