1. Introduction
This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your FLEXISPOT EB2 Electric Standing Desk. Designed for ergonomic comfort and productivity, this height-adjustable desk frame allows you to seamlessly switch between sitting and standing positions throughout your workday. Please read this manual carefully before assembly and use to ensure safe and optimal performance of your desk.
2. Product Features
2.1 Dual Motor System
The FLEXISPOT EB2 desk frame is equipped with a powerful dual-motor lifting system, ensuring smooth, stable, and quiet height adjustments. This robust system is engineered for durability and efficiency, providing reliable performance for your workspace.
Figure 2.1: Dual motor system capabilities, highlighting load capacity, energy efficiency, speed, and low noise operation.
Figure 2.2: The desk's quiet operation and anti-collision feature in action.
2.2 Height Adjustment and Anti-Collision System
The desk offers a wide height adjustment range, allowing users of various heights to find their optimal ergonomic position. The integrated anti-collision technology enhances safety by automatically stopping and slightly reversing the desk's movement if an obstruction is detected during adjustment.
Figure 2.3: Overview of the desk's height range and safety features.
Figure 2.4: Demonstration of the anti-collision safety feature.
2.3 Smart Control Panel with Memory Presets
The intuitive LED control panel allows for easy height adjustments and features four programmable memory presets. This enables multiple users or different preferred heights to be saved and recalled with a single touch, enhancing convenience and efficiency.
Figure 2.5: Detailed view of the smart control panel.
Figure 2.6: Close-up of the intelligent memory panel for easy height recall.
2.4 Robust Construction
Constructed from industrial-grade steel, the FLEXISPOT EB2 desk frame provides exceptional stability and durability. It is designed to support a significant load capacity, ensuring a secure and reliable foundation for your workspace setup.
Figure 2.7: The desk's stability, capable of supporting various items without wobble.
Figure 2.8: Close-up of the desk's robust steel leg construction.
3. Setup Guide
The FLEXISPOT EB2 desk frame is designed for straightforward assembly. Please follow the detailed step-by-step instructions provided in the separate assembly manual included with your product. Ensure all components are present before beginning assembly.
3.1 Pre-Assembly Checklist
- Verify all parts against the packing list.
- Ensure you have the necessary tools (typically an Allen wrench, which is usually included).
- Choose a clear, spacious area for assembly.
3.2 Assembly Overview
Assembly typically involves attaching the lifting columns to the feet, connecting the crossbar, installing the control box and control panel, and finally securing your chosen tabletop (not included with the frame) to the assembled frame. The process is designed to be completed in under an hour.
Figure 3.1: The FLEXISPOT EB2 desk frame components before tabletop installation.
4. Operating Instructions
4.1 Powering On
After successful assembly and connecting the desk to a power outlet, the LED display on the control panel will illuminate, indicating the current height of the desk.
4.2 Adjusting Height
- Press the Up (▲) button to raise the desk.
- Press the Down (▼) button to lower the desk.
- Release the button at your desired height. The LED display will show the current height in centimeters.
4.3 Setting Memory Presets
The control panel allows you to save up to four preferred height settings:
- Adjust the desk to your desired height using the Up/Down buttons.
- Press the M button (or similar memory button, refer to your specific control panel diagram). The display may show 'S-'.
- Within 3 seconds, press one of the numbered preset buttons (1, 2, 3, or 4). The current height will be saved to that preset.
- To recall a saved height, simply press the corresponding numbered preset button. The desk will automatically move to the saved position.
4.4 Anti-Collision Feature
The desk is equipped with an anti-collision sensor. If the desk encounters an obstacle (soft or hard) while moving up or down, it will automatically stop and reverse slightly to prevent damage to the desk or objects. This feature is always active.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your FLEXISPOT EB2 desk.
5.1 Cleaning
- Wipe the desk frame and control panel with a soft, damp cloth.
- Avoid using abrasive cleaners or harsh chemicals, as these can damage the finish.
- Ensure no liquid enters the control box or motor components.
5.2 General Care
- Periodically check all screws and bolts to ensure they are tight. Retighten if necessary.
- Avoid overloading the desk beyond its specified weight capacity.
- Do not place the desk in direct sunlight or in areas with extreme temperature fluctuations.
6. Troubleshooting
If you encounter any issues with your FLEXISPOT EB2 desk, please refer to the following common troubleshooting steps. If the problem persists, contact customer support.
6.1 Desk Not Moving / No Power
- Check if the power cord is securely plugged into both the desk's control box and the wall outlet.
- Ensure the wall outlet is functional by testing it with another device.
- Verify all cables connecting the motors to the control box are properly seated.
6.2 Desk Moves Unevenly or Stops
- Ensure the desk is not overloaded beyond its maximum weight capacity.
- Check for any obstructions under or around the desk that might be triggering the anti-collision system.
- Perform a reset (refer to your specific control panel manual for reset procedures, often involves holding down certain buttons).
6.3 Error Codes on Display
If an error code appears on the LED display, consult the specific error code section in your detailed assembly manual for corresponding solutions. Common solutions often involve checking connections or performing a reset.
7. Specifications
| Feature | Specification |
|---|---|
| Brand | FLEXISPOT |
| Model Number | EB2 |
| Color | Grey |
| Material | Industrial-grade Steel Alloy |
| Height Adjustment Range | 70 cm - 119 cm (27.6 in - 46.9 in) |
| Load Capacity | 100 kg (220 lbs) |
| Noise Level | Under 50 dB |
| Motor Type | Dual Motor |
| Speed | 25 mm/s |
| Control Panel | LED Display with 4 Memory Presets |
| Anti-Collision System | Yes |
| Certifications | CE, ROHS |
| Recommended Tabletop Size | 120-180 cm (Length) x 60-80 cm (Width) |
8. Warranty and Support
FLEXISPOT stands behind the quality of its products. Your EB2 Electric Standing Desk frame is covered by a comprehensive warranty:
- 5-Year Warranty: Covers the desk frame, motors, and other mechanical components.
- 2-Year Warranty: Covers the controller, switch, and electronic components.
This warranty covers defects in material and workmanship under normal use. For warranty claims, technical assistance, or any questions not covered in this manual, please contact FLEXISPOT customer support through their official website or the retailer where you purchased the product. Please have your model number and purchase date ready when contacting support.
Figure 8.1: FLEXISPOT warranty information for the desk frame and electronic components.
