Altec Lansing IMW789-BLG

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Altec Lansing LifeJacket XL Wireless Waterproof Floatable Bluetooth Speaker User Manual

Model: IMW789-BLG

Brand: Altec Lansing

1. Introduction

The Altec Lansing LifeJacket XL is a robust, wireless, and waterproof Bluetooth speaker designed for diverse environments. Its durable construction makes it suitable for outdoor use, poolside activities, or any setting requiring a resilient audio solution. This manual provides essential information for the setup, operation, and maintenance of your speaker.

Altec Lansing LifeJacket XL Bluetooth Speaker, front view

Figure 1.1: Front view of the Altec Lansing LifeJacket XL speaker, showcasing its robust design and speaker grille.

2. What's Included

Carefully unpack your LifeJacket XL speaker and verify the presence of all components:

  • Altec Lansing LifeJacket XL Bluetooth Speaker
  • USB Charging Cable
  • User Manual

3. Setup

3.1 Charging the Speaker

Prior to initial use, fully charge the speaker. Connect the provided USB cable to the speaker's charging port and the other end to a compatible USB power adapter (not supplied) or a computer's USB port. The charging indicator light will illuminate during the charging process and extinguish upon full charge.

Altec Lansing LifeJacket XL speaker with open port cover revealing USB ports

Figure 3.1: Rear view of the speaker showing the protective cover for the charging and auxiliary ports. Ensure this cover is securely closed to maintain water resistance.

3.2 Powering On/Off

To power on the speaker, press and hold the Power button located on the top panel until an audible tone is heard. To power off, press and hold the Power button again until the speaker shuts down.

Top view of Altec Lansing LifeJacket XL speaker showing control buttons

Figure 3.2: Top panel of the speaker displaying the power, volume, and Bluetooth pairing buttons.

4. Operating Instructions

4.1 Bluetooth Pairing

  1. Ensure the speaker is powered on and in pairing mode (the Bluetooth indicator light will flash).
  2. On your device (e.g., smartphone, tablet), enable Bluetooth and search for available devices.
  3. Select "LifeJacket XL" from the list of detected devices.
  4. Upon successful pairing, the Bluetooth indicator light on the speaker will become solid, and a confirmation tone will sound.

4.2 Basic Controls

  • Volume Up (+): Press to increase audio volume.
  • Volume Down (-): Press to decrease audio volume.
  • Play/Pause: Press the Power button once to toggle playback.
  • Track Skip: Double-press Volume Up (+) for the next track; double-press Volume Down (-) for the previous track.
  • Voice Assistant: Press the dedicated Voice Assistant button (often marked with a microphone icon) to activate Siri or Google Assistant on your connected device.

4.3 Water and Shock Resistance

The LifeJacket XL carries an IP67 rating, signifying its waterproof, shockproof, and snowproof capabilities. It is designed to withstand submersion in water up to 1 meter for a duration of 30 minutes. Always ensure the protective port cover is securely closed before exposing the speaker to water or challenging environmental conditions.

Altec Lansing LifeJacket XL speaker floating in water

Figure 4.1: The speaker demonstrating its floatable and waterproof capabilities in water.

Altec Lansing LifeJacket XL speaker partially buried in sand

Figure 4.2: The speaker's rugged design allows for use in sandy environments, highlighting its durability.

5. Maintenance

5.1 Cleaning

To clean the speaker, use a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the speaker's finish or internal components. If the speaker has been exposed to saltwater, rinse it thoroughly with fresh water and dry completely before charging.

5.2 Storage

Store the speaker in a cool, dry location, away from direct sunlight and extreme temperatures. Ensure the protective port cover is closed to prevent the ingress of dust and debris.

6. Troubleshooting

Problem Possible Cause Solution
Speaker does not power on. Battery is depleted. Charge the speaker fully using the supplied USB cable.
Cannot pair with Bluetooth device. Speaker not in pairing mode; device Bluetooth is off; device is too far from speaker. Ensure speaker is in pairing mode (flashing light). Toggle device Bluetooth off and on. Move device closer to speaker.
No sound or low volume. Volume too low on speaker or device; device not connected. Increase volume on both the speaker and the connected device. Re-establish the Bluetooth connection.
Sound distortion. Volume too high; weak Bluetooth signal. Reduce volume. Move the device closer to the speaker to improve signal strength.

7. Specifications

Feature Detail
Model Number IMW789-BLG
Connectivity Bluetooth, Wi-Fi
Waterproof Rating IP67 (Waterproof, Shockproof, Snowproof)
Battery Life Up to 40 hours
Wireless Range Approximately 1 foot
Dimensions (L x W x H) 25.4 x 10.92 x 16 cm
Weight 1.86 kg (4.1 lbs)
Voice Assistant Compatibility Siri, Google Assistant

Note: Product specifications are subject to change without prior notice.

8. Warranty and Support

Altec Lansing products are manufactured to high quality standards. For information regarding warranty coverage, technical support, or service, please consult the warranty card included with your product or visit the official Altec Lansing website. Retain your proof of purchase for any warranty claims.

For further assistance, you may contact Altec Lansing customer support through their official communication channels.

© 2024 Altec Lansing. All rights reserved.

This manual is provided for informational purposes only. Altec Lansing is not responsible for any inaccuracies or omissions contained herein.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.