iHome iBT232 Bluetooth Dual Alarm FM Clock Radio - User Manual

1. Introduction

The iHome iBT232 is a versatile Bluetooth dual alarm FM clock radio designed to enhance your daily routine. It features wireless audio streaming, a built-in speakerphone with echo noise cancellation, dual alarms, FM radio with presets, and a convenient USB charging port. This manual provides detailed instructions for setting up and operating your device to ensure optimal performance.

2. Important Safety Instructions

• Read these instructions thoroughly.
• Keep these instructions for future reference.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Only use attachments/accessories specified by the manufacturer.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

3. Package Contents

Please check the contents of your package carefully. If any items are missing or damaged, contact your retailer immediately.

• iHome iBT232 Unit
• Universal AC Adapter
• FM Antenna Wire

4. Controls and Indicators

Familiarize yourself with the buttons and ports on your iBT232 unit.

Top Panel Controls

Top panel controls of the iHome iBT232 unit, showing power, Bluetooth, FM presets, Aux, Sleep, Alarm 1, Alarm 2, volume, call, voice assistant, and snooze/dimmer buttons.

• Power Button: Turns the unit ON/OFF.
• Bluetooth Button: Initiates Bluetooth pairing mode.
• FM Presets Button: Cycles through saved FM radio stations.
• Aux Button: Selects Aux-in audio source.
• Sleep Button: Activates sleep timer.
• Alarm 1 & 2 Buttons: Sets and activates Alarm 1 and Alarm 2.
• Volume -/+ Buttons: Adjusts volume levels.
• Call Answer/End Buttons: Manages phone calls.
• Voice Assistant/Play/Pause Button: Activates voice assistant or controls media playback.
• Snooze/Dimmer Button: Snoozes active alarm or adjusts display brightness.

Rear Panel Ports

Rear panel of the iHome iBT232, displaying the Aux-in port, DST switch, Time Set button, USB charging port, and DC power input.

• Aux-in Jack: Connects external audio devices.
• DST Switch: Toggles Daylight Saving Time.
• Time Set Button: Used for manual time adjustment.
• USB Charging Port: Provides power for charging external devices.
• DC Power Input: Connects the AC adapter for main power.

5. Setup

5.1 Power Connection

1. Plug the supplied AC adapter into the DC power input jack on the back of the iBT232 unit.
2. Plug the other end of the AC adapter into a working wall outlet.
3. The unit will power on and the display will illuminate.

5.2 Battery Backup Installation

The iBT232 includes a battery backup system to maintain time and alarm settings during a power outage.

1. Open the battery compartment cover on the bottom of the unit.
2. Insert 2 'AA' batteries (not included) into the compartment, ensuring correct polarity (+/-).
3. Close the battery compartment cover securely.

5.3 Setting the Time

1. Press and hold the Time Set button located on the rear panel until the time display flashes.
2. Use the Volume -/+ buttons on the top panel to adjust the hours. Press Time Set again to confirm.
3. Use the Volume -/+ buttons to adjust the minutes. Press Time Set again to confirm and exit time setting mode.

5.4 Daylight Saving Time (DST) Switch

Slide the DST switch on the rear panel to adjust the time for Daylight Saving Time. Set to +1 for DST or -1 for standard time.

6. Operating Instructions

6.1 FM Radio Operation

The iHome iBT232 unit showcasing its FM Radio capability with digital tuning and 6 station presets.

1. Extend the FM antenna wire for optimal reception.
2. Press the Power button to turn on the unit.
3. Press the FM Presets button to enter FM radio mode.
4. Use the Volume -/+ buttons to manually tune to a desired station or press and hold to auto-scan for the next available station.
5. To save a preset, press and hold the FM Presets button until the preset number flashes. Use the Volume -/+ buttons to select a preset number (1-6) and press FM Presets again to confirm.

6.2 Bluetooth Pairing

A person using a smartphone to stream audio wirelessly to the iHome iBT232 Bluetooth Dual Alarm FM Clock Radio.

1. Press the Power button to turn on the unit.
2. Press and hold the Bluetooth button until the Bluetooth indicator on the display flashes, indicating pairing mode.
3. On your Bluetooth-enabled device, enable Bluetooth and select 'iHome iBT232' from the list of available devices.
4. Once paired, the Bluetooth indicator will glow solid, and you can stream audio wirelessly.

6.3 Aux-in Mode

Connect an external audio device (e.g., MP3 player) using a 3.5mm audio cable (not included) to the Aux-in jack on the rear of the unit. Press the Aux button on the top panel to switch to Aux-in mode.

6.4 Alarm Setting

The iBT232 features two independent alarms.

1. Press and hold either the Alarm 1 or Alarm 2 button until the alarm time flashes.
2. Use the Volume -/+ buttons to adjust the alarm hour, then press the respective Alarm button to confirm.
3. Repeat for minutes.
4. Select your desired alarm source (Bluetooth, FM Radio, or Tone) using the Volume -/+ buttons, then press the Alarm button to confirm.
5. Adjust the alarm volume using the Volume -/+ buttons, then press the Alarm button to confirm and activate the alarm. The alarm indicator will appear on the display.

6.5 Snooze and Dimmer Function

When an alarm sounds, press the Snooze/Dimmer button to temporarily silence it for a preset duration. When no alarm is active, press the Snooze/Dimmer button repeatedly to cycle through display brightness levels (High, Medium, Low, Off).

6.6 Speakerphone Functionality

The iHome iBT232 Bluetooth Dual Alarm FM Clock Radio in a home setting, illustrating its use as a speakerphone.

When your phone is paired via Bluetooth, you can use the iBT232 as a speakerphone.

• Answering a Call: Press the Call Answer button when a call comes in.
• Ending a Call: Press the Call End button to disconnect a call.
• The built-in microphone and echo noise cancellation ensure clear communication.

6.7 USB Charging Port

Front view of the iHome iBT232 Bluetooth Dual Alarm FM Clock Radio in gray, displaying the time and connected to a smartphone for USB charging.

Connect your USB charging cable (not included) to the USB charging port on the rear of the unit to charge your smartphone or other USB-powered devices.

6.8 Voice Control (Siri/Google Assistant)

A person interacting with the iHome iBT232 using voice commands for Siri or Google Assistant.

When your Bluetooth-paired device is connected, press the Voice Assistant button to activate Siri or Google Assistant. You can then use voice commands for various functions like making calls, listening to music, setting reminders, and checking the weather.

7. Maintenance

To keep your iBT232 in optimal condition:

• Clean the unit with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Keep the unit away from direct sunlight, excessive heat, or moisture.
• Ensure proper ventilation by not blocking any openings.

8. Troubleshooting

If you encounter issues with your iBT232, refer to the following common problems and solutions:

• Unit does not power on: Ensure the AC adapter is securely connected to both the unit and a working wall outlet. Check if the outlet has power.
• Clock display is not visible: Press the Snooze/Dimmer button to adjust the display brightness. Ensure the unit is powered on.
• Bluetooth pairing fails: Make sure the unit is in Bluetooth pairing mode (flashing indicator). Ensure your device's Bluetooth is enabled and within range. Try unpairing and re-pairing the device.
• No audio from FM radio: Extend the FM antenna wire fully. Try tuning to different stations. Adjust the volume.
• Alarm does not sound: Verify that the alarm is set and activated (alarm indicator visible). Check the alarm volume. Ensure the alarm time is correctly set.

Helpful Videos

9. Specifications

10. Warranty and Support

iHome products are manufactured to the highest quality standards. For specific warranty information and customer support, please refer to the warranty card included with your product or visit the official iHome website. Keep your purchase receipt as proof of purchase for warranty claims.