Introduction
This manual provides essential information for the safe and efficient operation of your Futaba Wall Charger. This charger is designed for use with Futaba 4PX and 18SZ transmitters and receivers, specifically for LifeP04 batteries. Please read this manual thoroughly before use.
Safety Information
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Do not expose the charger to moisture or extreme temperatures.
- Use only with compatible Futaba LifeP04 batteries.
- Disconnect from power outlet when not in use.
- Do not attempt to disassemble or modify the charger.
- Keep out of reach of children.
Product Overview
The Futaba Wall Charger is a compact and efficient power adapter designed for charging specific Futaba RC equipment.
Image: The Futaba Wall Charger, a black rectangular power adapter with an attached power cord and a barrel connector plug. The cord is coiled neatly next to the main unit.
Setup
- Unpack: Carefully remove the charger from its packaging.
- Inspect: Check the charger and its cable for any visible damage. Do not use if damaged.
- Connect to Device: Insert the barrel connector plug of the charger into the charging port of your compatible Futaba transmitter or receiver. Ensure a secure connection.
- Connect to Power: Plug the charger's AC prongs into a standard wall power outlet (Input Voltage: 240 Volts).
Operating Instructions
Once connected to both the device and a power outlet, the charger will begin charging the connected LifeP04 battery.
- The charger is designed for automatic charging. There are no user-adjustable settings.
- Charging time will vary depending on the battery's capacity and current charge level.
- Disconnect the charger from the device and the wall outlet once charging is complete or if the device indicates a full charge.
Maintenance
The Futaba Wall Charger requires minimal maintenance.
- Cleaning: Wipe the charger with a dry, soft cloth. Do not use liquid cleaners or solvents.
- Storage: Store the charger in a cool, dry place away from direct sunlight and moisture when not in use. Coil the cable neatly to prevent kinks or damage.
- Inspection: Periodically inspect the cable and plug for any signs of wear or damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Charger not working | Not plugged in correctly; Faulty outlet; Damaged charger/cable; Incompatible device/battery. | Ensure secure connections; Try a different outlet; Inspect for damage (do not use if damaged); Verify device/battery compatibility. |
| Device not charging | Device charging port issue; Battery issue; Charger not providing power. | Consult device manual; Test with another known good battery/charger if possible. |
If issues persist, contact Futaba customer support.
Specifications
- Product Dimensions: 3.6 x 3.2 x 1.25 inches
- Item Weight: 4 ounces (0.25 Pounds)
- Input Voltage: 240 Volts
- Output Voltage: 7.2 Volts
- Amperage: 0.2 Amps
- Wattage: 5.76 watts
- Compatible Devices: Futaba Transmitters and Receivers (specifically 4PX, 18SZ models)
- Battery Type Compatibility: LifeP04
- Mounting Type: Wall Mount
- Manufacturer: Futaba
Warranty and Support
For warranty information and technical support, please refer to the official Futaba website or contact their customer service directly.
Online Resources: Visit the official Futaba website for FAQs, product registration, and additional support materials.
Contact Support: Refer to your product packaging or the Futaba website for contact details (phone, email).
