Introduction
This manual provides detailed instructions for the assembly, operation, maintenance, and care of your Picket House Furnishings Dex King Platform Storage Bedroom Set. This set includes a King Platform Storage Bed, a Dresser, a Mirror, and a Nightstand, all featuring a distressed walnut finish and antique brass pulls. Please read all instructions carefully before beginning assembly or use to ensure safe and proper handling of your new furniture.

Image: The complete Picket House Furnishings Dex King Platform Storage Bedroom Set, showcasing the bed, dresser with mirror, and nightstand in a rustic-themed bedroom.
Safety Information
Your safety is paramount. Please adhere to the following guidelines:
- Anti-Tipping: This furniture set includes anti-tipping hardware. It is crucial to install these devices as instructed to prevent serious injury from furniture tip-over.
- Weight Limits: Do not exceed the recommended weight limits for drawers and surfaces. Overloading can compromise stability and structural integrity.
- Assembly: Ensure all components are correctly assembled and all fasteners are securely tightened before use. Periodically check and re-tighten fasteners.
- Children: Keep small parts and packaging materials away from children during assembly. Do not allow children to climb on or play with the furniture.
- Placement: Place furniture on a level surface. Uneven surfaces can lead to instability.
- Moving Furniture: When moving furniture, always lift it rather than dragging it to prevent damage to the furniture and flooring.
Setup and Assembly
Assembly is required for this bedroom set. It is recommended that two adults perform the assembly. Ensure you have adequate space and all necessary tools before beginning.
Required Tools (Not Included):
- Phillips Head Screwdriver
- Flat Head Screwdriver
- Rubber Mallet (optional, for gentle tapping)
Components Included:
- King Platform Storage Bed (Headboard, Footboard, Side Rails with Storage Drawers, Slats)
- Dresser
- Mirror (for attachment to Dresser)
- Nightstand
Please refer to the separate assembly instructions provided with each individual furniture piece for detailed, step-by-step guidance. Ensure all hardware is present before starting. Do not overtighten screws.

Image: The King Platform Storage Bed, part of the Dex bedroom set, featuring a distressed walnut finish and slatted headboard design.

Image: The King Platform Storage Bed with one of its side storage drawers partially open, demonstrating the integrated storage feature.

Image: The Dex Dresser with its matching mirror, showcasing multiple drawers and cabinet doors with antique brass pulls.

Image: The Dex Nightstand, featuring a single drawer and two cabinet doors, complementing the distressed walnut finish of the set.
Operation and Usage
Platform Storage Bed:
- The platform bed design eliminates the need for a box spring. Place your mattress directly on the provided slats.
- Utilize the four storage drawers integrated into the side rails for linens, clothing, or other bedroom essentials. Ensure drawers are closed completely when not in use.
Dresser and Nightstand:
- Drawers are designed for smooth operation. Avoid forcing drawers open or closed.
- Distribute weight evenly within drawers to prevent strain on the drawer glides.
- The dresser and nightstand surfaces can be used for lamps, decorative items, or personal belongings. Use coasters under drinks to protect the finish.
Care and Maintenance
Proper care will extend the life and beauty of your Picket House Furnishings Dex Bedroom Set. This furniture is constructed from Poplar Wood, MDF, and Poplar Solid Wood with a walnut finish.
- Cleaning: Dust regularly with a soft, dry, lint-free cloth. For deeper cleaning, wipe with a damp cloth and immediately dry with another clean, soft cloth. Avoid abrasive cleaners, harsh chemicals, or silicone-based polishes.
- Spills: Blot spills immediately with a clean, dry cloth. Do not rub.
- Sunlight and Heat: Avoid placing furniture in direct sunlight or near heat sources (e.g., radiators, heating vents) as this can cause fading, cracking, or warping.
- Humidity: Maintain a consistent humidity level in your room to prevent wood from expanding or contracting excessively.
- Hardware: Periodically check all screws and fasteners to ensure they remain tight. Re-tighten as necessary.
- Moving: When moving furniture, always lift it. Do not drag, as this can damage the legs, joints, or floor.

Image: A close-up view of the distressed walnut wood finish, highlighting the texture and color of the furniture material.
Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Furniture feels wobbly or unstable. | Loose fasteners; uneven floor. | Check and tighten all assembly screws. Ensure furniture is on a level surface; use shims if necessary. |
| Drawers do not slide smoothly. | Drawer glides are dirty or misaligned; drawer is overloaded. | Clean drawer glides. Check for obstructions. Ensure drawer contents are evenly distributed and not exceeding weight limits. |
| Wood appears dry or faded. | Exposure to direct sunlight or dry air. | Relocate furniture away from direct sunlight. Consider using a humidifier in dry environments. Consult a furniture care specialist for appropriate wood conditioners if needed. |
| Minor scratches or dents. | Accidental impact during use. | For minor blemishes, touch-up pens or furniture repair kits matching the walnut finish may be used. Test in an inconspicuous area first. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | JX600KB4PC |
| Brand | Picket House |
| Set Includes | 1 King Platform Storage Bed, 1 Dresser, 1 Mirror, 1 Nightstand |
| Finish | Walnut (Distressed) |
| Materials | Poplar Wood, MDF, Poplar Solid Wood |
| Hardware | Antique Brass Finished Pulls |
| Bed Dimensions (Overall) | 66" H x 79" W x 88" D |
| Headboard Dimensions | 66" H x 79" W x 3" D |
| Footboard Dimensions | 30" H x 79" W x 3" D |
| Bed Rail Dimensions | 16" H x 82" W x 2" D |
| Storage Bed Rail Dimensions (Drawers) | 11" H x 49" W x 20" D (4 drawers total) |
| Dresser Dimensions | 40" H x 62" W x 18" D |
| Mirror Dimensions | 40" H x 44" W x 2" D |
| Nightstand Dimensions | 29" H x 28" W x 17" D |
| Total Product Weight | 540 lbs |
| Assembly Required | Yes |
| Special Features | 4 Storage Drawers in Side Rails, Anti-Tipping Hardware Included |

Image: A diagram illustrating the key dimensions (height, width, depth) of the King Platform Storage Bed for reference.
Warranty Information
For specific warranty details regarding your Picket House Furnishings Dex King Platform Storage Bedroom Set, please refer to the warranty documentation included with your purchase or visit the official Picket House website or the retailer's product page where you purchased the item. Warranty terms typically cover manufacturing defects for a limited period from the date of purchase.
Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Picket House Furnishings customer support or the retailer from whom you purchased the product.
- Manufacturer: Picket House Furnishings
- Model Number: JX600KB4PC
- UPC: 848853065063
Please have your model number and purchase information ready when contacting support.