Introduction
This manual provides comprehensive instructions for the safe and efficient operation of your Utilitech Digital Appliance Timer, Model 0611422. Please read this manual thoroughly before using the device and retain it for future reference.
Safety Information
IMPORTANT SAFETY INSTRUCTIONS:
- For indoor use only.
- Do not immerse in water or use in wet conditions.
- Do not exceed the electrical ratings: 15 Amps, 1875 Watts resistive, 125 Volts AC, 60 Hz, 1 HP.
- Ensure the appliance connected to the timer does not exceed the maximum load.
- Always unplug the timer from the outlet before cleaning.
- Keep out of reach of children.
Product Features
The Utilitech Digital Appliance Timer is designed for heavy-duty use, offering precise control over your electrical appliances.
- Two (2) grounded outlets.
- Program up to 16 daily ON/OFF settings.
- Manual ON/OFF override function.
- Battery backup to retain settings during power outages.
- Adjustable for daylight saving time.
- Countdown and Random functions.
Figure 1: Front view of the Utilitech Digital Appliance Timer in its retail packaging. This image displays the timer unit with its digital display and control buttons (Reset, Set, -, +, Day, Countdown, Random, +/- 1hr, ON/OFF switch). The packaging highlights key features such as "Program up to 16 daily settings" and "Manual on/off override and battery backup."
Package Contents
- 1 x Utilitech Digital Appliance Timer (Model 0611422)
- 1 x Instruction Manual (this document)
Setup
Initial Power-Up and Reset
- Plug the timer into a standard 125V AC wall outlet.
- Locate the "Reset" button on the front of the timer. Use a small, non-metallic pointed object (like a pen tip) to press the "Reset" button. This will clear all previous settings and prepare the timer for programming.
- The display should show "0:00" and flash.
Setting Current Time and Day
- Press the "Set" button once. The hour digits will flash.
- Use the "+" and "-" buttons to adjust the hour. Pay attention to AM/PM indicators.
- Press "Set" again. The minute digits will flash.
- Use the "+" and "-" buttons to adjust the minutes.
- Press "Set" again. The day of the week will flash.
- Use the "Day" button to select the current day (e.g., MO for Monday, TU for Tuesday, etc.).
- Press "Set" one last time to confirm and exit time setting mode. The display will show the current time and day.
Operating Instructions
Programming ON/OFF Times
The timer allows for up to 16 distinct ON/OFF programs.
- Press the "Set" button repeatedly until "1 ON" appears on the display. This is your first ON program.
- Use the "+" and "-" buttons to set the desired ON hour, then press "Set".
- Use the "+" and "-" buttons to set the desired ON minute, then press "Set".
- Use the "Day" button to select the days for this program. You can choose individual days, weekdays, weekends, or all days.
- Press "Set" again. "1 OFF" will appear. This is your first OFF program.
- Repeat steps 2-4 to set the desired OFF time and days for this program.
- Continue pressing "Set" to cycle through "2 ON", "2 OFF", up to "16 ON", "16 OFF", programming as many as needed.
- To exit programming mode, simply stop pressing buttons for about 30 seconds, or press the "ON/OFF" switch to return to normal operation.
Manual Override
The "ON/OFF" switch allows you to manually turn the connected appliance ON or OFF, overriding the programmed settings temporarily.
- Press the "ON/OFF" switch to cycle between ON, OFF, and AUTO modes.
- In "AUTO" mode, the timer will follow your programmed settings.
- In "ON" mode, the appliance will remain ON regardless of programming.
- In "OFF" mode, the appliance will remain OFF regardless of programming.
Countdown Function
Use the "Countdown" button to set a temporary ON or OFF period.
Random Function
The "Random" function can be activated to turn the appliance ON and OFF at irregular intervals within a set period, providing a security deterrent.
Daylight Saving Time Adjustment
Press the "+/- 1hr" button to quickly adjust the time forward or backward by one hour for daylight saving changes.
Maintenance
- Ensure the timer is unplugged from the wall outlet before cleaning.
- Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- The internal battery backup is designed to retain settings during power outages. If the display becomes dim or settings are frequently lost, the internal battery may need servicing by a qualified technician.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Timer display is blank or dim. | Not plugged in; power outage; internal battery low. | Ensure timer is securely plugged in. Check household power. If problem persists, internal battery may need service. |
| Appliance does not turn ON/OFF as programmed. | Incorrect programming; timer in manual ON/OFF mode; appliance not working. | Verify programmed times and days. Ensure timer is in "AUTO" mode. Test appliance by plugging it directly into an outlet. |
| Settings are lost after a power outage. | Internal battery backup is depleted or faulty. | The timer has an internal battery backup. If settings are lost, the battery may need to be charged by leaving the timer plugged in for several hours, or it may require service. |
Specifications
- Model Number: 0611422
- UPC: 054732819072
- Electrical Rating: 15 Amps, 1875 Watts resistive, 125 Volts AC, 60 Hz, 1 HP
- Number of Settings: Up to 16 daily ON/OFF programs
- Product Dimensions: Approximately 4 x 4 x 2 inches
- Item Weight: Approximately 6.4 ounces
- Mounting Type: Surface Mount
- Indoor Use Only
- Manufacturer: Utilitech
Figure 2: Back view of the Utilitech Digital Appliance Timer packaging. This image shows detailed ratings (15 Amps, 1875 Watts resistive, 125 Volts AC, 60 Hz, 1 HP), safety instructions, and manufacturing information. It also displays the UPC code 054732819072 and model number 0611422.
Warranty and Support
Specific warranty information is not provided in the available product details. For warranty claims or technical support, please refer to the contact information provided on the product packaging or contact Utilitech directly.
Distributed by LG Sourcing, Inc.
P.O. Box 1535
N. Wilkesboro, NC 28659
Website: www.lgsourcing.com
Phone: 1-866-994-4148
