Introduction
This manual provides instructions for the proper use and maintenance of your Baymart DY22 Portable Wireless Bluetooth Stereo Speaker. Please read this manual thoroughly before operating the device to ensure optimal performance and longevity.
Image: The Baymart DY22 Portable Wireless Bluetooth Stereo Speaker, black with red accents, shown from a front-top angle.
Product Overview
Key Features
- Superior Sound Quality: Equipped with 10W acoustic drivers and Passive Vibration Technology for clear, full sound.
- Versatile Input Modes: Supports Wireless Bluetooth, FM Radio, Micro SD card, USB flash drive, and AUX-in.
- Long Playtime: Built-in 2200 mAh rechargeable battery provides up to 8 hours of playback.
- Compact Design: Portable and easy to carry for indoor and outdoor use.
- Broad Compatibility: Connects with various Bluetooth-enabled devices including smartphones, tablets, and computers.
- Built-in Microphone: For hands-free calling.
Image: An exploded view diagram illustrating the dual high-performance acoustic drivers within the speaker, emphasizing clear sound and deep bass.
Image: A person holding the compact Baymart DY22 speaker, highlighting its portability for various activities.
Image: The speaker on a wooden desk, surrounded by a smartphone, iPad, and laptop, illustrating its wide compatibility with different devices.
Package Contents
- Baymart DY22 Bluetooth Speaker
- 3.5mm Audio Cable
- Micro USB Charging Cable
- Quick Start Manual (this document)
Component Identification
Image: Top view of the speaker showing control buttons: Previous Track, Mode Select, Play/Pause/Call Answer, Next Track, Volume -, Volume +.
Image: Rear view of the speaker showing ports: Line-In Jack (AUX), Micro SD Card slot, USB Input Slot, USB Charge Port (Micro USB), and Power Switch (OFF/ON).
Setup
Initial Charging
- Locate the Micro USB Charging Cable included in the package.
- Connect the Micro USB end of the cable to the USB Charge Port on the rear of the speaker.
- Connect the standard USB end of the cable to a USB power adapter (not included) or a computer's USB port.
- Allow the speaker to charge fully before first use. Charging time is approximately 3.5 hours. The charging indicator light (if present, refer to device for specific behavior) will typically change or turn off when fully charged.
Powering On/Off
- To power on the speaker, slide the Power Switch (located on the rear) to the "ON" position.
- To power off the speaker, slide the Power Switch to the "OFF" position.
Operating Instructions
Bluetooth Pairing
- Ensure the speaker is powered on. It will automatically enter Bluetooth pairing mode, indicated by a flashing LED light (refer to device for specific indicator).
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "DY22" from the list of available devices.
- Once paired, the speaker will emit an audible confirmation, and the LED indicator will typically stop flashing and remain solid.
- The speaker will automatically reconnect to the last paired device when powered on, if the device is within range.
Image: The speaker positioned on a desk, wirelessly connected to a laptop and smartphone, illustrating Bluetooth 5.0 connectivity.
FM Radio Mode
- Power on the speaker.
- Press the "MODE" button repeatedly until "FM" mode is announced or indicated.
- To auto-scan and save available FM stations, press and hold the "Play/Pause" button. The speaker will scan and store stations.
- Use the "Previous Track" and "Next Track" buttons to navigate between saved stations.
Micro SD Card / USB Playback
- Insert a Micro SD card into the Micro SD Card slot or a USB flash drive into the USB Input Slot on the rear of the speaker.
- The speaker will automatically switch to the corresponding mode (if not, press "MODE" to select).
- Playback will begin automatically. Use the "Previous Track", "Next Track", and "Play/Pause" buttons to control playback.
AUX-in Mode
- Connect one end of the 3.5mm Audio Cable to the Line-In Jack (AUX) on the rear of the speaker.
- Connect the other end of the 3.5mm Audio Cable to the audio output jack of your external device.
- Press the "MODE" button repeatedly until "AUX" mode is announced or indicated.
- Audio playback will be controlled from your external device.
Call Function
- When connected via Bluetooth, if a call is received, press the "Play/Pause/Call Answer" button to answer the call.
- To end a call, press the "Play/Pause/Call Answer" button again.
- To reject an incoming call, press and hold the "Play/Pause/Call Answer" button.
Volume Control
- Press the "Vol-" button to decrease the volume.
- Press the "Vol+" button to increase the volume.
Charging
The Baymart DY22 speaker is powered by a built-in 2200 mAh rechargeable Lithium Polymer battery. When the battery is low, the speaker may indicate this with an audible prompt or a flashing LED. Connect the Micro USB charging cable to the speaker's USB Charge Port and a 5V USB power source to recharge. A full charge takes approximately 3.5 hours and provides up to 8 hours of playtime, depending on volume and usage.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the speaker's exterior. Do not use liquid cleaners or abrasive materials.
- Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Recharge the speaker regularly, even if not in use for extended periods.
- Water Exposure: This speaker is not waterproof. Avoid exposure to water or high humidity.
Troubleshooting
| Problem | Possible Solution |
|---|---|
| Speaker does not power on. |
|
| Cannot pair via Bluetooth. |
|
| No sound or low volume. |
|
| FM Radio reception is poor. |
|
| USB/Micro SD card not playing. |
|
| Charging port issues (e.g., crackling sound during charging, difficulty inserting cable). |
|
Specifications
| Feature | Detail |
|---|---|
| Brand | Baymart |
| Model Name | DY22 (732840192354) |
| Speaker Type | Bookshelf / Portable |
| Connectivity Technology | Bluetooth, Auxiliary (3.5mm), USB |
| Wireless Communication Technology | Bluetooth & FM |
| Bluetooth Range | 10 Meters |
| Speaker Maximum Output Power | 10 Watts |
| Audio Driver Type | Dynamic Driver |
| Power Source | Battery Powered |
| Battery Type | 1 Lithium Polymer battery (included) |
| Battery Capacity | 2200 mAh |
| Charging Time | 3.5 Hours |
| Input Voltage | 5 Volts |
| Product Dimensions (D x W x H) | 2.8" x 8.7" x 2.8" (7cm x 22.3cm x 7cm) |
| Item Weight | 1.4 Pounds (0.64 kg) |
| Control Method | Touch buttons |
| Special Features | Bass Boost, USB Port, Built-in Microphone, FM Radio, Micro SD Card Slot |
| Recommended Uses | Indoor/Outdoor |
| Is Waterproof | No |
Image: Diagram showing the dimensions of the Baymart DY22 speaker: 8.7 inches (22.3 cm) in length, 2.8 inches (7 cm) in width, and 2.8 inches (7 cm) in height.
Warranty and Support
Warranty Information
The Baymart DY22 speaker comes with a limited warranty. Please refer to the warranty card included in your package or contact Baymart customer support for specific terms and conditions regarding warranty coverage and duration.
Customer Support
For technical assistance, troubleshooting, or warranty inquiries, please contact Baymart customer support. Contact information can typically be found on the product packaging, the official Baymart website, or through your retailer.