Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Harbor Breeze Mazon 44-inch Brushed Nickel Flush Mount Indoor Ceiling Fan. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Safety Information
- Always disconnect power at the main circuit breaker before installation or servicing.
- All wiring must be in accordance with national and local electrical codes.
- Ensure the installation site can support the fan's weight.
- Do not operate the fan with damaged blades.
- Keep hands, clothing, and other objects clear of the fan blades when in operation.
- This fan is designed for indoor use only.
Package Contents
Verify that all components are present before beginning installation.
- Ceiling Fan Motor Assembly
- 3 Silver Finish Plywood Blades
- Integrated Matte Opal Glass Light Kit
- Handheld Remote Control
- Mounting Hardware Kit
- Instruction Manual
Setup and Installation
Professional installation is recommended if you are unfamiliar with electrical wiring.
- Prepare the Mounting Location: Turn off power at the circuit breaker. Securely attach the mounting bracket to a ceiling joist or an outlet box approved for ceiling fan support.
- Wire the Fan: Connect the fan's electrical wires to the household wiring according to the wiring diagram provided in the separate detailed installation guide (not included in this summary). Ensure all connections are secure and insulated.
- Attach the Fan Assembly: Carefully lift the fan motor assembly and attach it to the mounting bracket.
- Install Blades: Attach the three silver finish plywood blades to the motor housing using the provided screws. Ensure blades are securely fastened.
- Install Light Kit: Connect the integrated matte opal glass light kit to the fan's wiring. Secure the light kit to the fan assembly.
- Restore Power: Once installation is complete, restore power at the circuit breaker.
Operating Instructions
Your Harbor Breeze Mazon ceiling fan comes with a handheld remote control for convenient operation.
Remote Control Functions
- Fan Speed Control: The remote allows you to select from 3 motor speeds (Low, Medium, High).
- Light Control: Turn the integrated LED light on or off. The light is dimmable; press and hold the light button to adjust brightness.
- Reverse Air Flow: This fan features a reverse air flow function, allowing you to change the direction of blade rotation for seasonal comfort.
Note: If the fan produces a humming noise, especially on low speed, ensure it is not connected to a dimmer switch on the wall. This fan's integrated LED light is dimmable via the remote, and an external dimmer switch can cause interference.
Maintenance
- Cleaning: To clean the fan, wipe with a soft, damp cloth. Do not use abrasive cleaners as they may damage the finish.
- Blade Care: Periodically check that all blade screws are tight. Loose blades can cause wobbling and noise.
- Light Kit: The integrated LED module is designed for long life and does not require bulb replacement. If the light stops working, refer to the troubleshooting section.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start | Power off; loose wiring; remote battery low | Check circuit breaker; verify wiring connections; replace remote battery |
| Fan wobbles | Loose blade screws; unbalanced blades; loose mounting | Tighten all blade screws; ensure blades are balanced; check mounting bracket |
| Light does not work | Loose wiring; remote issue; integrated LED module failure | Check wiring to light kit; ensure remote is functioning; contact support if LED module fails |
| Humming noise | Connected to a wall dimmer switch | Remove wall dimmer switch and replace with a standard ON/OFF switch |
Specifications
- Model: Mazon 00724
- Fan Diameter: 44 inches
- Number of Blades: 3
- Blade Finish: Silver
- Finish Type: Brushed Nickel
- Light Kit: Integrated LED (18-watt)
- Control Method: Handheld Remote
- Motor Speeds: 3
- Reverse Air Flow: Yes
- Mounting Options: Flush mount
- Indoor/Outdoor Usage: Indoor
- Airflow (CFM): 4545 (High Speed)
- Noise Level: 45 dB
- Voltage: 120 Volts
- Product Dimensions: 44"D x 44"W x 12"H
- Item Weight: 16.87 pounds
- Certifications: UL Safety Listing
Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official HARBOR BREEZE website. Keep your proof of purchase for warranty claims.
Customer Service: For assistance, please contact HARBOR BREEZE customer support.
