Laney FS2-MINI Dual Footswitch Instruction Manual

Introduction

The Laney FS2-MINI is a compact dual footswitch designed to provide convenient control for compatible amplifiers and effects units. Its small footprint makes it suitable for crowded pedalboards, offering reliable switching with visual status indication. This manual provides essential information for setting up, operating, and maintaining your FS2-MINI footswitch.

Features

• Status LED: Provides visual feedback on the footswitch's active state.
• Detachable Cable: Allows for custom cable lengths and easy replacement.
• High-Quality Switching Components: Ensures reliable performance.
• Solid Metal Chassis Construction: Offers durability and road-worthiness.
• External PSU Option: Can be powered by an external 9V DC 40mA power supply (not always required, depending on the connected amplifier).

Setup

Follow these steps to connect your Laney FS2-MINI Dual Footswitch:

1. Connect the Cable: Attach the provided TRS (Tip-Ring-Sleeve) cable to the input jack on the rear of the FS2-MINI.
2. Connect to Amplifier/Device: Plug the other end of the TRS cable into the footswitch input of your compatible amplifier or multi-effects unit. Refer to your amplifier's manual for specific footswitch input requirements.
3. Power (Optional): If your amplifier does not supply power through the footswitch input (which is common for LED indicators), connect an optional 9V DC 40mA external power supply to the dedicated power input on the FS2-MINI.

Operating Instructions

The Laney FS2-MINI features two footswitches, typically labeled 'A' and 'B' or similar, each with an associated status LED. The functionality of each switch is determined by the device it is connected to.

• Basic Switching: Pressing a footswitch will toggle the assigned function (e.g., channel switching, effect on/off). The corresponding LED will illuminate when the function is active.
• Momentary vs. Latching: The FS2-MINI typically operates as a latching footswitch, meaning a single press activates a function and it remains active until pressed again. Some devices may interpret the signal differently, allowing for momentary functions (active only while held down).
• Multi-Effects Unit Control: When connected to a multi-effects processor like the Line 6 HX Stomp, the footswitch can be assigned to control various parameters, including:
  • Toggling individual effects (stompbox mode).
  • Cycling through snapshots or presets.
  • Tap tempo.
  Refer to your multi-effects unit's manual for detailed instructions on assigning external footswitch functions.

Maintenance

To ensure the longevity and optimal performance of your Laney FS2-MINI:

• Cleaning: Use a soft, dry cloth to clean the chassis. Avoid abrasive cleaners or solvents.
• Storage: Store the footswitch in a dry environment, away from extreme temperatures and humidity.
• Cable Care: Avoid kinking or excessive bending of the TRS cable to prevent internal damage.

Troubleshooting

• No LED Activity:
  • Ensure the TRS cable is securely connected to both the footswitch and the amplifier/device.
  • Verify that your amplifier/device is powered on and its footswitch input is functioning correctly.
  • If external power is required for the LEDs, ensure a 9V DC 40mA power supply is connected and working.
• Incorrect Functionality:
  • Check the settings on your connected amplifier or multi-effects unit to ensure the footswitch functions are correctly assigned.
  • Some devices may require specific TRS cable wiring (straight vs. crossover). Consult your device's manual.

Specifications

Warranty & Support

For warranty information and technical support, please refer to the official Laney website or contact your local dealer. Keep your proof of purchase for any warranty claims.