SHIMANO TY300

Download PDF
Contents

Shimano Tourney TY300 6/7-Speed Rear Derailleur Instruction Manual

Model: TY300 | Brand: SHIMANO

Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your Shimano Tourney TY300 6/7-Speed Rear Derailleur. Adhering to these instructions will ensure optimal performance, safety, and longevity of your component. The TY300 series is designed for reliable shifting across 6 or 7-speed drivetrains, featuring Shimano's SIS (Shimano Index System) for precise gear changes.

Shimano Tourney TY300 Rear Derailleur with Dropout Claw Hanger
Image: Shimano Tourney TY300 Rear Derailleur. This image displays the complete derailleur unit, including the pulleys, cage, and the dropout claw hanger for frame attachment.

Safety Information

  • Always wear appropriate safety gear, including eye protection, when working on your bicycle.
  • Ensure the bicycle is stable and securely supported before beginning any installation or maintenance.
  • If you are unsure about any step, consult a professional bicycle mechanic.
  • Keep small parts away from children.
  • Regularly inspect your derailleur for damage or wear. Do not use if components are bent or broken.

Setup and Installation

Proper installation is crucial for the performance of your rear derailleur. The TY300 model typically comes with a dropout claw hanger for easy mounting on frames without an integrated derailleur hanger.

  1. Mounting the Derailleur: Attach the derailleur to the bicycle frame's dropout using the integrated claw hanger. Ensure it is securely tightened to the manufacturer's specifications.
  2. Cable Installation: Route the shift cable from the shifter lever through the frame guides to the derailleur. Secure the cable to the derailleur's cable fixing bolt, ensuring proper tension.
  3. Low Limit Screw Adjustment (L-screw): Adjust the 'L' limit screw so that the upper guide pulley is directly aligned with the smallest cog when the chain is on the smallest cog. This prevents the chain from shifting into the spokes.
  4. High Limit Screw Adjustment (H-screw): Adjust the 'H' limit screw so that the upper guide pulley is directly aligned with the largest cog when the chain is on the largest cog. This prevents the chain from shifting off the largest cog and into the frame.
  5. B-Tension Adjustment: With the chain on the largest cog and the largest chainring, adjust the B-tension screw to ensure adequate clearance (5-6mm) between the upper guide pulley and the largest cog. This optimizes shifting performance.
  6. Indexing Adjustment: Fine-tune the cable tension using the barrel adjuster on the shifter or derailleur until shifts are smooth and precise across all gears.

Operation

The Shimano Tourney TY300 rear derailleur utilizes the SIS (Shimano Index System) for reliable and consistent gear changes. Shifting is performed by actuating your bicycle's shift levers.

  • SIS Shifting: The indexed system ensures that each click of the shifter corresponds to a precise movement of the derailleur, moving the chain to the next cog.
  • Double Servo Mechanism: This feature allows the guide pulley to track the cogs closely as it moves front to back, optimizing each shift for smoothness and accuracy.
  • MegaRange Compatibility (TX models): Some TY300 models (TX) come with a Smart Cage, providing compatibility with MegaRange freewheels/cassettes for a wider gear range.

Maintenance

Regular maintenance extends the life and performance of your derailleur.

  • Cleaning: Keep the derailleur, especially the pulleys and cage, free from dirt and grime. Use a degreaser and brush, then rinse and dry thoroughly.
  • Lubrication: Apply a light lubricant to the pivot points of the derailleur and the chain regularly. Avoid over-lubricating the pulleys.
  • Cable Inspection: Check the shift cable for fraying or corrosion. Replace if necessary to maintain smooth shifting.
  • Limit Screw Check: Periodically verify that the limit screws are still correctly set to prevent over-shifting.
  • B-Tension Check: Ensure the B-tension gap remains optimal for your drivetrain.

Troubleshooting

Common issues and their potential solutions:

ProblemPossible CauseSolution
Difficulty shifting to smaller cogsCable tension too high, H-screw too tightLoosen barrel adjuster (turn clockwise), check H-screw adjustment.
Difficulty shifting to larger cogsCable tension too low, L-screw too tightTighten barrel adjuster (turn counter-clockwise), check L-screw adjustment.
Chain rubbing or noisy shiftingIncorrect indexing, bent derailleur hanger, worn chain/cogsAdjust indexing, inspect hanger for alignment, check drivetrain wear.
Derailleur hitting spokesL-screw incorrectly set, bent derailleur hangerRe-adjust L-screw, check and straighten derailleur hanger.

Specifications

  • Model: TY300
  • Speed Compatibility: 6/7-Speed
  • Mounting Type: Dropout Claw Hanger
  • Pulleys: 13t upper and lower pulleys
  • Material: Aluminum
  • Item Weight: Approximately 0.5 Pounds (0.23 kg)
  • Product Dimensions: 5.25"L x 5.25"W x 3"H
  • Compatible Chains: HG 6/7/8 speed chains

Warranty Information

This Shimano Tourney TY300 Rear Derailleur comes with a Limited Warranty. For specific details regarding coverage, duration, and claims procedures, please refer to the official Shimano warranty documentation provided with your purchase or visit the official Shimano website.

Customer Support

For further assistance, technical support, or to explore other Shimano products, please visit the official Shimano store or contact their customer service department.

Official Shimano Store: SHIMANO Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.