Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Cooler Master Cosmos II 25th Anniversary Edition XL-ATX Full-Tower PC Case. Please read this manual thoroughly before beginning installation to ensure proper setup and to maximize the lifespan of your product.
The Cosmos II 25th Anniversary Edition features a robust hybrid metal structure, dual curved tempered glass side panels, and an airflow-optimized design. It is designed to accommodate XL-ATX motherboards and offers extensive space for high-performance components.
Safety Information
- Always disconnect power from all components before installation or maintenance.
- Handle tempered glass panels with care to prevent breakage.
- Wear anti-static wrist straps when handling internal components to prevent electrostatic discharge (ESD) damage.
- Keep small parts and packaging materials away from children.
- Ensure proper ventilation around the case to prevent overheating.
- The case is heavy (approximately 59.5 pounds). Exercise caution when lifting or moving.
Package Contents
Verify that all items are present in the package:
- Cooler Master Cosmos II 25th Anniversary Edition Case
- Accessory Box (screws, standoffs, cable ties, etc.)
- Instruction Manual (this document)
Setup and Component Installation
1. Unpacking the Case
Carefully remove the case from its packaging. Place it on a stable, flat surface. The case is heavy, so it is recommended to have assistance when moving it.
Image: Front-left view of the Cooler Master Cosmos II 25th Anniversary Edition case, showcasing the curved tempered glass side panel and internal blue LED lighting.
2. Accessing the Interior
The Cosmos II 25th Anniversary Edition features dual curved tempered glass side panels that swing open. To open a side panel, locate the latch mechanism (typically at the rear of the panel) and release it. The panel will swing outwards. For full access, the panels can be lifted off their hinges once fully open.
Image: The Cooler Master Cosmos II 25th Anniversary Edition case with its left tempered glass side panel swung open, revealing the internal structure.
Image: Top-down view of the Cooler Master Cosmos II 25th Anniversary Edition case with both tempered glass side panels fully opened, resembling wings.
3. Motherboard Installation
Install the necessary standoffs for your motherboard form factor (XL-ATX, E-ATX, ATX, Micro-ATX, Mini-ITX). Carefully place your motherboard onto the standoffs and secure it with screws. The case features an aluminum motherboard tray for a premium touch.
Image: Interior view of the Cooler Master Cosmos II 25th Anniversary Edition case, showing a motherboard, graphics cards, and cooling system installed.
4. Drive Installation (HDD/SSD)
The case provides multiple drive bays. Utilize the tool-less mechanisms or screws provided in the accessory box to install your 3.5-inch hard drives or 2.5-inch solid-state drives into the designated bays. The case includes hot-swap drive bays for convenience.
5. Power Supply Installation
Mount your power supply unit (PSU) in the dedicated compartment at the bottom rear of the case. Secure it with screws from the rear of the case.
6. Graphics Card and Expansion Card Installation
Remove the necessary PCI slot covers. Insert your graphics card(s) or other expansion cards into the motherboard's PCI-E slots and secure them with screws or the tool-less retention clips.
7. Cable Management
Route all power and data cables through the designated cutouts and behind the motherboard tray. Use cable ties to secure cables for optimal airflow and a clean aesthetic. Connect all necessary power cables to your components and the motherboard.
8. Front Panel Connections
Connect the front panel cables (USB, audio, power switch, reset switch, LED indicators) to the corresponding headers on your motherboard. Refer to your motherboard manual for specific header locations.
Image: Close-up of the Cooler Master Cosmos II 25th Anniversary Edition case's top front panel, showing USB ports and audio jacks.
Image: Front view of the Cooler Master Cosmos II 25th Anniversary Edition case with the top sliding cover closed, concealing the front I/O ports.
Image: Front view of the Cooler Master Cosmos II 25th Anniversary Edition case with the top sliding cover open, revealing the front I/O ports and optical drive bays.
9. Closing the Case
Once all components are installed and cables are managed, carefully re-attach the side panels. Ensure they are properly aligned with the hinges and gently press them until the latches engage securely.
Operating Instructions
1. Powering On
After connecting all external peripherals and the power cable, press the power button located on the top front panel of the case to turn on your system. The blue LED ambient lighting will illuminate, indicating power.
2. Using Front Panel Ports
The top front panel provides access to USB 2.0 and USB 3.0 ports, as well as audio input/output jacks for convenient connectivity of peripherals.
3. Fan Control (If Applicable)
The case may include an integrated fan controller. Refer to the specific controls on the top panel to adjust fan speeds for optimal cooling and noise levels. If using motherboard fan headers, control fans via your motherboard's BIOS/UEFI or software.
Maintenance
1. Cleaning Dust Filters
The Cosmos II 25th Anniversary Edition is designed with airflow optimization and includes dust filters (e.g., for the power supply, front intake). Regularly check and clean these filters to maintain optimal airflow and prevent dust buildup inside the case. Filters can typically be slid out for cleaning.
2. Exterior Cleaning
Wipe the exterior surfaces, including the brushed aluminum and tempered glass panels, with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or glass. For tempered glass, use a glass cleaner sparingly on a cloth, not directly on the panel.
3. Internal Dust Removal
Periodically, with the system powered off and unplugged, open the side panels and use compressed air to remove dust from internal components, fans, and heatsinks. Ensure fans are held stationary while blowing air to prevent damage.
Troubleshooting
System Does Not Power On
- Check Power Connections: Ensure the power supply is properly connected to the wall outlet and the power switch on the PSU is in the "ON" position. Verify all internal power cables (24-pin ATX, 8-pin CPU, PCIe, SATA) are securely connected.
- Front Panel Headers: Confirm that the power switch header from the case is correctly connected to the motherboard's front panel header pins. Refer to your motherboard manual.
- Component Seating: Re-seat the CPU, RAM, and graphics card to ensure they are properly installed in their respective slots.
Fans Not Spinning or LED Lighting Not Working
- Fan Connections: Verify that all fan cables are securely connected to either the motherboard fan headers or the integrated fan controller (if used).
- LED Connections: Ensure any LED strip or fan lighting cables are correctly connected to the appropriate headers or controller.
- Fan Controller Power: If using an integrated fan controller, ensure it is receiving power from the power supply (e.g., SATA power connector).
Side Panels Difficult to Close
- Cable Obstruction: Check for any cables or components that might be obstructing the closing mechanism of the side panels. Ensure cables are neatly managed behind the motherboard tray.
- Alignment: Ensure the side panels are correctly aligned with their hinges before attempting to close and latch them. Apply gentle, even pressure.
Hot-Swap Drive Bay Issues
- Drive Seating: Ensure the drive is fully inserted into the hot-swap bay until it clicks into place, making proper contact with the backplane connector.
- Power/Data Cables: Verify that the hot-swap backplane is receiving power and that the SATA data cables are connected to the motherboard.
Specifications
| Feature | Detail |
|---|---|
| Brand | Cooler Master |
| Model Number | RC-1200-KKN2 |
| Case Type | Full Tower |
| Material | Tempered Glass, Steel, Aluminum |
| Color | Cosmo 25th (Silver/Black) |
| Item Weight | 59.5 Pounds (approx. 27 kg) |
| Cooling Method | Air |
| Number of Fans (Pre-installed) | 2 |
| Light Color | Blue LED |
| Total USB Ports | 2x USB 3.0, 2x USB 2.0 (Total 4) Note: Based on visual evidence; JSON data was contradictory. |
| Internal Bays Quantity | 2 (Hot-swap bays) + additional internal bays for 3.5"/2.5" drives |
| Motherboard Support | XL-ATX, E-ATX, ATX, Micro-ATX, Mini-ITX |
| UPC | 884102031076 |
Warranty Information
The Cooler Master Cosmos II 25th Anniversary Edition PC Case comes with a 2-year warranty. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the official Cooler Master warranty policy available on their website or contact customer support.
Customer Support
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Cooler Master customer support. You can find contact information and additional resources on the official Cooler Master website.
Website: www.coolermaster.com (Please note: External links are provided for informational purposes only and may not be directly clickable in all viewing environments.)