LinQ W735 Dynamic Unidirectional Microphone User Manual

1. Product Overview

The LinQ W735 is a versatile dynamic microphone designed for both wired and wireless operation. It features a durable metal construction, an internal shock mount, a hum-compensating coil, and a neodymium magnet. The microphone includes an on/off switch with a locking mechanism. For wireless use, it offers a range of up to 30 meters with its included receiver, which connects directly to a karaoke machine or amplifier's 6.5 mm jack input. Alternatively, a 3-meter wired connection is possible using the provided cable. The microphone is powered by AA batteries, which are included. It is designed to be insensitive to acoustic noise, boasts a high sound pressure level of over 150 dB SPL, and features a silent switch. Its cardioid polar pattern focuses on sound from the front, minimizing background noise.

1.1 Package Contents

• LinQ W735 Dynamic Microphone
• Wireless Receiver (6.5 mm Jack)
• 3-meter Audio Cable (6.5 mm Jack to 6.5 mm Jack)
• AA Batteries (for microphone and receiver)

Image 1.1: LinQ W735 microphone, wireless receiver, and product packaging.

2. Safety Information

• Do not expose the microphone or receiver to water or excessive moisture.
• Avoid dropping or subjecting the device to strong impacts.
• Do not attempt to disassemble or modify the microphone or receiver. This will void the warranty.
• Use only the specified AA batteries. Ensure correct polarity when inserting batteries.
• Remove batteries if the device will not be used for an extended period to prevent leakage.
• Keep batteries out of reach of children.

3. Product Features

• Dual Mode Operation: Supports both wireless and wired connections.
• Unidirectional (Cardioid) Polar Pattern: Captures sound primarily from the front, reducing background noise.
• Durable Construction: Features a metal microphone body for longevity.
• Internal Shock Mount: Minimizes handling noise.
• Hum-Compensating Coil & Neodymium Magnet: Enhances audio clarity.
• On/Off Switch with Lock: Prevents accidental power changes.
• Wireless Range: Up to 30 meters (line of sight).
• High SPL Handling: Capable of handling sound pressure levels over 150 dB.
• Battery Powered: Uses AA batteries for convenience.

4. Setup

4.1 Battery Installation

1. Microphone: Unscrew the bottom part of the microphone handle. Insert two AA batteries, ensuring correct polarity (+/-). Screw the handle back on securely.
2. Wireless Receiver: Open the battery compartment on the receiver. Insert one AA battery, ensuring correct polarity (+/-). Close the compartment.

Image 4.1: LinQ W735 microphone, wireless receiver, audio cable, and AA batteries.

4.2 Wireless Connection

1. Ensure batteries are correctly installed in both the microphone and the wireless receiver.
2. Insert the 6.5 mm jack of the wireless receiver directly into the microphone input of your amplifier, karaoke machine, or mixer.
3. Turn on the wireless receiver.
4. Slide the ON/OFF switch on the microphone to the 'ON' position.
5. The microphone and receiver should automatically pair. Adjust the volume on your audio device as needed.

4.3 Wired Connection

1. Ensure batteries are installed in the microphone. The microphone requires power even in wired mode for optimal performance.
2. Connect one end of the 3-meter audio cable to the microphone's output port.
3. Connect the other end of the audio cable to the microphone input of your amplifier, karaoke machine, or mixer.
4. Slide the ON/OFF switch on the microphone to the 'ON' position.
5. Adjust the volume on your audio device as needed.

5. Operating Instructions

5.1 Powering On/Off

To power on the microphone, slide the switch located on the microphone body to the 'ON' position. To power off, slide the switch to the 'OFF' position. The switch also features a 'LOCK' position to prevent accidental power changes during use.

5.2 Usage Tips

• Hold the microphone approximately 2-6 inches (5-15 cm) from your mouth for optimal sound capture.
• Point the top of the microphone directly towards the sound source.
• Avoid covering the microphone grille with your hand, as this can affect sound quality.
• When using wirelessly, ensure a clear line of sight between the microphone and the receiver for best performance and range.
• Adjust the volume on your connected audio device (amplifier, mixer) to achieve the desired sound level.

6. Maintenance

• Cleaning: Wipe the microphone body with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Storage: Store the microphone and receiver in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Replacement: Replace batteries when the sound quality degrades or the microphone/receiver fails to power on. Always replace all batteries at the same time.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.