CLP Louise Bar Stool Instruction Manual

1. Introduction

Thank you for choosing the CLP Louise Bar Stool. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stool. Please read these instructions carefully before assembly and retain them for future reference.

Image 1.1: The CLP Louise Bar Stool in dark grey fabric with a wooden frame. This image shows the overall design of the stool, featuring a high backrest with button tufting and a padded seat with decorative copper ornamental buttons along the edge.

The CLP Louise Bar Stool is designed for comfort and stability, featuring a padded fabric seat, a high backrest, and a sturdy rubber wood frame. Its elegant design, including copper ornamental buttons, makes it suitable for various home bar or kitchen island settings.

2. Safety Instructions

• Ensure all components are present and undamaged before assembly. Do not proceed with assembly if any parts are missing or damaged.
• Assemble the bar stool on a soft, clean surface to prevent scratches.
• Always use the correct tools as specified in the assembly instructions.
• Do not overtighten screws during assembly, as this may damage the wood or components.
• Regularly check all screws and connections to ensure they remain tight. Loose connections can lead to instability and potential injury.
• Do not stand on the bar stool. It is designed for seating only.
• The maximum load capacity for this bar stool is 130 kg. Do not exceed this weight limit.
• Keep children away from the assembly area and small parts.

3. Package Contents

Please verify that all the following components are included in your package:

• 1x Padded Seat with Backrest (A)
• 4x Leg Pieces (B)
• 2x Side Footrest Bars (C)
• 1x Front Footrest Bar (D)
• 1x Hardware Pack (E) containing screws, washers, and an Allen key.

If any parts are missing or damaged, please contact CLP customer support.

4. Assembly Instructions

Follow these steps to assemble your CLP Louise Bar Stool:

1. Attach Legs to Seat: Carefully place the padded seat (A) upside down on a clean, soft surface. Attach each of the four leg pieces (B) to the designated corners on the underside of the seat using the provided screws and washers from the hardware pack (E). Hand-tighten the screws initially.
2. Install Side Footrest Bars: Connect the two side footrest bars (C) between the front and back legs on each side. Secure them with screws from the hardware pack (E). Do not fully tighten yet.
3. Install Front Footrest Bar: Connect the front footrest bar (D) between the two front legs. Secure it with screws from the hardware pack (E).
4. Final Tightening: Once all legs and footrest bars are in place, gently place the stool upright on a level surface. Apply slight pressure to ensure all parts are aligned. Then, systematically tighten all screws using the Allen key provided. Ensure all connections are firm and secure, but do not overtighten.
5. Stability Check: After assembly, gently rock the stool to check for stability. If it wobbles, loosen the screws slightly, adjust the stool on a flat surface, and then re-tighten the screws.

Image 4.1: Front view of the assembled CLP Louise Bar Stool, showcasing the dark grey fabric, button-tufted backrest, and wooden legs with a footrest.

5. Operating Instructions

The CLP Louise Bar Stool is designed for straightforward use:

• Seating: Sit centrally on the seat, ensuring your weight is evenly distributed.
• Footrest: Utilize the integrated footrest for added comfort and support.
• Movement: When moving the stool, lift it rather than dragging it to prevent damage to the legs or floor.

6. Care and Maintenance

Proper care will extend the life and appearance of your bar stool:

• Fabric Cleaning: For light dirt, wipe the fabric with a damp cotton towel. For more thorough cleaning, we recommend using a cotton towel moistened with distilled water. Avoid harsh chemicals or abrasive cleaners.
• Vacuuming: Regularly vacuum the fabric surfaces with an appropriate upholstery attachment to remove dust and debris.
• Wood Frame: Wipe the wooden frame with a soft, dry cloth. Avoid prolonged exposure to moisture.
• Spills: Blot spills immediately with a clean, dry cloth. Do not rub, as this can spread the stain.
• Sunlight Exposure: Avoid placing the stool in direct sunlight for extended periods, as this can cause fabric fading and wood discoloration.
• Hardware Check: Periodically check and tighten all screws and bolts to maintain stability.

7. Troubleshooting

8. Specifications

Image 8.1: Dimensional diagram of the CLP Louise Bar Stool, indicating a total height of 113cm, total depth of 57cm, and total width of 42cm.

9. Warranty and Support

For information regarding warranty coverage, returns, or technical support, please refer to the retailer's policy where the product was purchased or visit the official CLP website. Please have your model number (101797856) and proof of purchase ready when contacting support.