TAMIYA TAM85047

Tamiya Spray Lacquer TS-47 Chrome Yellow Instruction Manual

Model: TAM85047

1. Product Overview

The Tamiya Spray Lacquer TS-47 Chrome Yellow is a high-quality aerosol paint designed for model building and various hobby applications. It provides a vibrant chrome yellow color with a gloss finish, offering fast-drying properties for efficient work. This product is suitable for indoor use on various surfaces.

Tamiya Spray Lacquer TS-47 Chrome Yellow can

Image 1.1: Front view of the Tamiya Spray Lacquer TS-47 Chrome Yellow can. The label clearly displays 'TAMIYA COLOR FOR PLASTICS' and 'FOR ADULT MODELERS ONLY'.

2. Safety Information

WARNING: Flammable liquid and vapor. Harmful if swallowed or inhaled. May cause eye and skin irritation.

3. Setup and Preparation

  1. Surface Preparation: Ensure the surface to be painted is clean, dry, and free of dust, grease, or other contaminants. For best results, lightly sand smooth surfaces to provide adhesion.
  2. Ventilation: Work in a well-ventilated area, preferably outdoors or in a spray booth with adequate exhaust.
  3. Shake Can: Before use, shake the can vigorously for at least one minute after the mixing ball begins to rattle. Continue shaking periodically during application.
  4. Test Spray: Always perform a test spray on a scrap piece of material to check color and spray pattern before applying to your main project.

4. Operating (Application)

  1. Distance: Hold the can approximately 20-30 cm (8-12 inches) from the surface.
  2. Application Technique: Apply paint in thin, even coats using a steady, sweeping motion. Avoid applying a thick single coat, as this can lead to runs or an uneven finish.
  3. Multiple Coats: For optimal coverage and finish, apply several thin coats rather than one heavy coat. Allow each coat to dry to the touch before applying the next.
  4. Drying Time Between Coats: A typical dry time between coats is approximately 10-15 minutes, depending on humidity and temperature.
Tamiya Spray Lacquer TS-47 Chrome Yellow can with cap

Image 4.1: Side view of the Tamiya Spray Lacquer TS-47 Chrome Yellow can, showing the full can with its cap, indicating it's ready for use.

5. Drying and Curing

The Tamiya Spray Lacquer TS-47 Chrome Yellow is fast-drying. The approximate dry time to touch is 0.5 hours (30 minutes). Full cure time may vary depending on coat thickness, temperature, and humidity. For best results, allow painted items to cure for at least 24 hours before handling extensively or applying additional layers like clear coats.

6. Maintenance and Storage

7. Troubleshooting

ProblemPossible CauseSolution
Uneven spray / SplatteringCan not shaken enough; Nozzle clogged; Can too cold.Shake vigorously; Clean nozzle (invert and spray); Warm can to room temperature.
Runs or dripsToo much paint applied in one coat; Can held too close.Apply thinner coats; Increase distance from surface.
Poor adhesionSurface not clean or properly prepared.Ensure surface is clean, dry, and lightly sanded if necessary.
Dull finishInsufficient coats; Environmental factors (humidity).Apply additional thin coats; Ensure proper drying conditions.

8. Specifications

FeatureDetail
BrandTAMIYA
Model NameTS-47
ColorChrome Yellow (#FDD835)
Finish TypeGloss
Item FormAerosol
Item Volume100 Milliliters (3.5 Fl Oz)
Item Weight4.6 ounces
Special FeatureFast-Drying
Paint TypeSpray
Specific UsesInterior/Exterior (Indoor recommended)
Surface RecommendationIndoor
Age Range (Description)Adult
Dry Time (to touch)0.5 hours
CoverageApprox. 2 or 3, 1/24 scale sized car model bodies
Water Resistance LevelWater Resistant

9. Warranty and Support

For information regarding product warranty, returns, or technical support, please refer to the official Tamiya America, Inc. website or contact their customer service directly. Keep your purchase receipt as proof of purchase.

Official Tamiya America, Inc. Website: www.tamiyausa.com