Sharp XL-BH250 Micro Shelf Executive Speaker System User Manual

1. Introduction

Thank you for purchasing the Sharp XL-BH250 Micro Shelf Executive Speaker System. This system is designed to provide high-quality audio playback from various sources, including CDs, AM/FM radio, Bluetooth-enabled devices, USB drives, and external audio players. Please read this manual thoroughly before operating the unit to ensure proper use and to maximize your listening experience.

Key features of your new system include:

• Digital AM/FM tuner with 40 programmable presets for easy access to your favorite stations.
• Compatibility with CD-RW, CD-R, WMA, and MP3 formats for versatile music playback.
• Bluetooth streaming capability, allowing wireless connection with Apple and Android devices.
• Convenient headphone output for private listening.
• Remote control for effortless operation from a distance.
• Multiple connectivity options including USB and optical input for external devices, and NFC touchpoint for quick Bluetooth pairing.

2. What's in the Box

Upon opening the package, please ensure all the following components are present:

• Sharp XL-BH250 Micro Shelf Executive Speaker System (Main Unit)
• Two (2) Speaker Units
• Remote Control
• Power Cord
• User Manual (this document)

Figure 2.1: Overview of the Sharp XL-BH250 system, showing the central control unit and the two separate speaker units.

3. Setup

3.1 Placement

Place the main unit and speakers on a stable, flat surface. Ensure there is adequate ventilation around the unit to prevent overheating. Avoid placing the system near heat sources, direct sunlight, or areas with high humidity.

3.2 Connecting the Speakers

Connect the speaker wires from the main unit to the corresponding terminals on the back of each speaker. Ensure correct polarity (red to red, black to black) for optimal sound quality.

3.3 Power Connection

After connecting the speakers, plug the power cord into the AC inlet on the back of the main unit, then plug the other end into a standard wall outlet (AC 120V, 60Hz).

3.4 Connecting External Devices

• USB Port: Insert a USB flash drive into the USB port on the front panel for MP3/WMA playback.
• Audio In: Connect external audio players (e.g., smartphones, tablets) to the AUDIO IN jack on the front panel using a 3.5mm audio cable (not included).
• Optical Input: For digital audio input from compatible devices, use the optical input on the rear of the unit (cable not included).

Figure 3.1: Front panel of the main unit, highlighting the USB, Audio In, and Headphone ports.

4. Operating Instructions

4.1 Power On/Off

Press the POWER button on the front panel or the remote control to turn the unit on or off.

4.2 Source Selection

Press the FUNCTION button on the front panel or the remote control repeatedly to cycle through available sources: CD, AM, FM, Bluetooth, USB, and AUDIO IN.

4.3 CD Playback

1. Press the FUNCTION button to select CD mode.
2. Press the OPEN/CLOSE button to open the CD tray.
3. Place up to five CDs on the trays with the label side facing up.
4. Press the OPEN/CLOSE button again to close the tray.
5. Playback will begin automatically. Use the PLAY/PAUSE, STOP, SKIP, and SEARCH buttons for control.

4.4 Radio Operation (AM/FM)

1. Press the FUNCTION button to select AM or FM mode.
2. Press the TUNING +/- buttons to manually tune to a station.
3. Press and hold TUNING +/- for automatic station search.
4. To Store Presets: Tune to the desired station, press MEMORY, then use PRESET +/- to select a preset number, and press MEMORY again to confirm.
5. To Recall Presets: Use the PRESET +/- buttons.

4.5 Bluetooth Operation

1. Press the FUNCTION button to select Bluetooth mode. The Bluetooth indicator will flash.
2. On your Bluetooth-enabled device, search for "SHARP XL-BH250" and select it to pair.
3. Once paired, the Bluetooth indicator will glow steadily. You can now stream audio from your device.
4. NFC Pairing: If your device supports NFC, simply tap it against the NFC touchpoint on the unit for quick pairing.

4.6 USB Playback

1. Insert a USB flash drive containing MP3/WMA files into the USB port.
2. Press the FUNCTION button to select USB mode.
3. Playback will start automatically. Use the playback controls (PLAY/PAUSE, STOP, SKIP) as needed.

4.7 Volume Control

Rotate the VOLUME knob on the front panel or use the VOLUME +/- buttons on the remote control to adjust the sound level.

4.8 Headphone Use

Plug headphones into the PHONES jack on the front panel for private listening. The main speakers will automatically mute.

5. Maintenance

5.1 Cleaning the Unit

Wipe the unit with a soft, dry cloth. For stubborn stains, dampen the cloth lightly with water. Do not use abrasive cleaners, waxes, or solvents as they may damage the finish.

5.2 CD Care

Handle CDs by their edges. Keep them clean and free of scratches. Store CDs in their cases when not in use to prevent dust and damage.

5.3 General Safety

• Do not block ventilation openings.
• Do not expose the unit to rain or moisture.
• Unplug the unit from the power outlet during lightning storms or when unused for long periods.

6. Troubleshooting

7. Specifications

8. Warranty and Support

For warranty information and technical support, please contact Sharp customer service. You can find more information and support resources by visiting the official Sharp store on Amazon:

Visit the Sharp Store

Please retain your proof of purchase for any warranty claims.