Little Live Pets 28278

Little Live Pets Frosty My Dream Puppy Instruction Manual

Model: 28278

Introduction

Welcome to the world of Little Live Pets Frosty My Dream Puppy. This interactive toy puppy is designed to move, feel, and respond like a real puppy, offering a unique play experience. Frosty features various interaction modes, including sounds, movements, and responses to touch and feeding.

This manual provides essential information on setting up, operating, maintaining, and troubleshooting your Frosty My Dream Puppy to ensure optimal enjoyment and longevity of the product.

Little Live Pets Frosty My Dream Puppy in its retail packaging
Image: Frosty My Dream Puppy in its original packaging, showcasing the product and its features.

Setup

Unboxing

Carefully remove Frosty My Dream Puppy and all accessories from the packaging. Ensure all components, including the puppy and its feeding bottle, are present.

Battery Installation

Frosty My Dream Puppy requires 4 AA batteries for operation. Batteries are not included and must be purchased separately.

  1. Locate the battery compartment on the underside of the puppy.
  2. Using a Phillips head screwdriver, open the battery compartment cover.
  3. Insert 4 new AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
  4. Replace the battery compartment cover and secure it with the screw.

Initial Activation

After installing the batteries, locate the ON/OFF switch, typically found near the battery compartment or on one of the puppy's paws. Slide the switch to the 'ON' position to activate Frosty.

Little Live Pets Frosty My Dream Puppy sitting with its feeding bottle
Image: Frosty My Dream Puppy, removed from its packaging, sitting next to its feeding bottle. This image illustrates the product's appearance and accessories.

Operating Your Frosty My Dream Puppy

Frosty is designed to respond to various interactions, mimicking a real puppy. Explore its different modes and reactions:

  • Touch Interactions: Pat Frosty's head or rub its tummy to elicit different responses, such as happy sounds or movements.
  • Feeding: Use the provided bottle to feed Frosty. It will make drinking sounds and may fall asleep in your arms after feeding.
  • Sounds and Movements: Frosty can make various puppy sounds, open and close its eyes, move its head, and its tummy will move as if it's breathing.
  • Kisses: Bring your face close to Frosty's nose, and it may give you a kiss back.
  • Sleep Mode: After periods of inactivity or specific interactions, Frosty may enter a sleep mode, indicated by closed eyes and gentle breathing movements.
Back of Little Live Pets Frosty My Dream Puppy box showing various interaction points
Image: The back of the product box, illustrating different ways to interact with Frosty, such as making sounds, moving its head, tickling, kissing, feeding, and observing its breathing.

Care and Maintenance

Cleaning Instructions

To maintain the cleanliness and appearance of your Frosty My Dream Puppy, follow these guidelines:

  • Spot or Wipe Clean: Use a soft, damp cloth to gently wipe any soiled areas. Avoid submerging the puppy in water or using harsh cleaning agents, as this can damage the electronic components.
  • Drying: Allow the puppy to air dry completely before further play or storage.
  • Storage: When not in use, store Frosty in a clean, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

If your Frosty My Dream Puppy is not functioning as expected, consider the following:

  • No Power/No Response:
    • Ensure the ON/OFF switch is in the 'ON' position.
    • Check the batteries. Replace with new AA batteries if they are depleted or incorrectly inserted.
  • Intermittent Functionality:
    • Weak batteries can cause inconsistent performance. Replace batteries if necessary.
    • Ensure there is no obstruction to moving parts or sensors.
  • Unusual Sounds or Movements:
    • Turn the puppy off and then on again to reset its internal systems.

If problems persist after attempting these steps, please refer to the support information provided by the manufacturer.

Specifications

BrandLittle Live Pets
Model Number28278
Product Dimensions (HxWxD)Approximately 12 x 11.5 x 6 inches (30.5 x 29.2 x 15.2 cm)
MaterialPlastic
Battery Type4 x AA Batteries (not included)
Recommended Age3 years and up

Warranty and Support

For warranty information or technical support regarding your Little Live Pets Frosty My Dream Puppy, please refer to the documentation included with your purchase or visit the official Little Live Pets website. Contact details for customer service are typically available on the manufacturer's packaging or website.

Related Documents - 28278

Preview Little Live Pets Sleepy Puppy Interactive Toy User Guide
Comprehensive user guide for the Little Live Pets Sleepy Puppy, an interactive plush toy. Learn how to operate, care for, and troubleshoot your toy. Includes safety warnings and package contents.
Preview Little Live Pets Tiara Repair Guide: Fixing a Non-Moving Toy
Detailed guide on how to repair a Little Live Pets My Dream Puppy Tiara toy that is not moving or making sounds, covering diagnosis and step-by-step repair instructions.
Preview Little Live Pets My Pet Piggy - Interactive Toy Instructions
Comprehensive guide to operating and troubleshooting the Little Live Pets My Pet Piggy interactive toy. Learn how to make your pig walk, dance, nuzzle, feed, and sleep.
Preview Little Live Pets Bright Light Chameleon - Instruction Manual
User manual and instructions for the Little Live Pets Bright Light Chameleon toy, including setup, play modes, troubleshooting, and care information.
Preview Little Live Pets MY Walking LAMB: Interactive Toy Instructions
User guide for the Little Live Pets MY Walking LAMB toy, detailing its features like feeding, walking, dancing, and nurturing, along with setup, troubleshooting, and safety information.
Preview Little Live Pets Snuggles Puppy Battery Replacement Guide
Learn how to replace the batteries in your Little Live Pets Snuggles Puppy to restore movement, sounds, and sensor functions. This guide provides step-by-step instructions and troubleshooting tips.