InnoGear 150ml Ultrasonic Essential Oil Diffuser AD150 User Manual

Introduction

This manual provides detailed instructions for the safe and effective use of your InnoGear 150ml Ultrasonic Essential Oil Diffuser, Model AD150. Please read this manual thoroughly before operation and retain it for future reference.

Image: The InnoGear 150ml Ultrasonic Essential Oil Diffuser, showcasing its compact design and LED light feature.

Safety Information

To ensure safe operation and prevent damage, observe the following precautions:

• Avoid direct skin contact with undiluted essential oils.
• Keep the diffuser out of reach of children and pets.
• Ensure proper ventilation in the area where the diffuser is used.
• Always follow essential oil safety guidelines provided by the oil manufacturer.
• Do not exceed the maximum water fill line (150ml) to prevent water from entering the air outlet.
• Use only the provided power adapter (DQS121V-240050-U).
• The diffuser features a waterless auto shut-off system. It will automatically turn off when the water level is too low.
• Made of high-quality food-grade PP material, the diffuser is BPA-free and safe for use around babies and pregnant individuals.

Image: The diffuser is constructed from BPA-free materials and includes a waterless auto shut-off for safety.

Package Contents

• 1 x InnoGear 150ml Aroma Diffuser
• 1 x DQS121V-240050-U Power Adapter
• 1 x User Manual (this document)

Setup Instructions

1. Place the Diffuser: Position the diffuser on a flat, stable surface away from direct sunlight or heat sources.
2. Remove the Cover: Gently lift the top cover of the diffuser.
3. Add Water: Fill the water tank with clean tap water up to the 150ml maximum fill line. Do not overfill.
4. Add Essential Oil: Add 5-10 drops of your preferred essential oil directly into the water tank. Adjust the quantity based on personal preference and room size.
5. Replace the Cover: Securely place the top cover back onto the diffuser. Ensure it is properly aligned.
6. Connect Power: Plug the power adapter into the diffuser's power input port, then plug the adapter into a standard electrical outlet.

Image: The diffuser's compact size and 150ml water capacity, suitable for everyday use.

Operating Instructions

The diffuser features two buttons: LIGHT and MIST.

Mist Control:

• Press the MIST button once for Continuous Mist Mode. The indicator light will be red. This mode provides mist continuously for approximately 5-6 hours.
• Press the MIST button a second time for Intermittent Mist Mode. The indicator light will be green. This mode cycles mist on and off, extending operation to approximately 9-11 hours.
• Press the MIST button a third time to turn off the mist function.

Image: Mist button functionality, showing red light for continuous mist and green light for intermittent mist.

Light Control:

• Press the LIGHT button once to turn on the 7-color cycling LED light.
• Press the LIGHT button again to fix the light to a specific color. Subsequent presses will cycle through the available colors.
• Press and hold the LIGHT button for 2 seconds to turn off the light function.

Image: The diffuser providing soft light, ideal for nighttime use or as a night light.

Maintenance and Cleaning

Regular cleaning helps maintain optimal performance and extends the lifespan of your diffuser. Clean the diffuser after every 3-5 uses, or when changing essential oils.

1. Unplug and Empty: Disconnect the power adapter and remove the top cover. Carefully pour out any remaining water from the drain side of the tank. Avoid pouring water into the air outlet.
2. Wipe the Tank: Use a cotton swab or soft cloth dampened with clean water to gently wipe the inside of the water tank and the ultrasonic plate.
3. Clean the Cover: Wipe the inside and outside of the top cover with a soft, damp cloth.
4. Dry Thoroughly: Ensure all parts are completely dry before reassembling or storing the diffuser.

Important: Do not use corrosive detergents or harsh chemicals to clean the diffuser. Do not immerse the diffuser base in water.

Image: Visual instructions for cleaning the diffuser, emphasizing proper water drainage and wiping.

Troubleshooting

Specifications

Warranty and Support

For product support, warranty information, or inquiries, please visit the official InnoGear website or contact their customer service. Keep your purchase receipt for warranty claims.

You can find more information and contact details on the InnoGear Store on Amazon.