1. Introduction
This manual provides essential information for the safe and effective use of your SLLEA AC/DC Adapter. This adapter is specifically designed to provide reliable power to compatible devices, such as the Brookstone Pocket Projector Pro GCo ProGCo 200 907977. Please read this manual thoroughly before use and retain it for future reference.
2. Safety Information
Your safety is paramount. Please observe the following precautions:
- Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
- Ensure the adapter is used only with devices that match its voltage and current specifications. Refer to your device's manual for power requirements.
- Do not expose the adapter to water, moisture, or extreme temperatures.
- Do not disassemble or modify the adapter. Refer all servicing to qualified personnel.
- Unplug the adapter from the power outlet when not in use or during electrical storms.
- This adapter features built-in Over Voltage Protection and Over Heat Protection to safeguard your devices.
3. Product Overview
3.1 Components
Figure 3.1: Front view of the SLLEA AC/DC Adapter, showing the main body, two-pin plug, and integrated power cable.
Figure 3.2: Side view of the adapter, highlighting the compact design and the durable power cable.
Figure 3.3: Angled view of the adapter, showcasing its robust construction and textured casing for better grip.
3.2 Features
- World Wide Input Voltage: 100-240VAC 50/60Hz, suitable for international travel.
- Industry Quality: Designed with Over Voltage Protection and Over Heat Protection for enhanced safety and device longevity.
- Compatibility: Specifically designed for Brookstone Pocket Projector Pro GCo ProGCo 200 907977.
- Power Source: Corded Electric.
- Main Power Connector Type: 2 Pin.
4. Setup
Follow these steps to set up your SLLEA AC/DC Adapter:
- Verify Compatibility: Before connecting, ensure your device (e.g., Brookstone Pocket Projector Pro GCo 200) requires the power specifications provided by this adapter. Refer to your device's original manual.
- Connect to Device: Plug the adapter's output connector firmly into the power input port of your compatible device.
- Connect to Power Outlet: Insert the adapter's two-pin plug into a standard wall power outlet (100-240VAC, 50/60Hz).
- Power On Device: Once connected, you can power on your device as usual.
5. Operating Instructions
The SLLEA AC/DC Adapter operates automatically once connected to a power source and a compatible device. It provides a stable power supply for continuous operation of your electronic device.
- Always ensure the adapter is fully inserted into both the wall outlet and your device's power port.
- Avoid pulling the cable forcefully to disconnect; always grasp the plug itself.
- If your device is not powering on, check all connections and ensure the wall outlet is functional.
6. Maintenance
Proper maintenance ensures the longevity and optimal performance of your adapter:
- Cleaning: Disconnect the adapter from all power sources and devices before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or abrasive materials.
- Storage: When not in use, store the adapter in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling the cable to prevent damage.
- Inspection: Periodically inspect the adapter and cable for any signs of damage, such as frayed wires, bent prongs, or cracks in the casing. Discontinue use if damage is found.
7. Troubleshooting
If you encounter issues with your SLLEA AC/DC Adapter, refer to the table below:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not powering on. | Adapter not properly connected. Wall outlet is not active. Device compatibility issue. | Ensure all connections are secure. Test the wall outlet with another device. Verify the adapter's specifications match your device's requirements. |
| Adapter feels unusually hot. | Overload or poor ventilation. Internal fault. | Ensure adequate ventilation around the adapter. Disconnect and allow to cool. If problem persists, discontinue use and contact support. |
| Flickering power to device. | Loose connection. Damaged cable/adapter. | Check all connections. If flickering continues, the adapter or cable may be damaged. Discontinue use. |
8. Specifications
| Attribute | Value |
|---|---|
| Brand | SLLEA |
| Compatible Devices | Projectors (specifically Brookstone Pocket Projector Pro GCo ProGCo 200 907977) |
| Input Voltage | 100-240VAC |
| Frequency Range | 50/60Hz |
| Power Source | Corded Electric |
| Main Power Connector Type | 2 Pin |
| Special Feature | Travel |
| Safety Features | Over Voltage Protection, Over Heat Protection |
9. Warranty and Support
SLLEA stands behind the quality of its products. Your AC/DC Adapter comes with the following warranty and support:
- 30 Days Money Back Guarantee
- 60 Days Free Exchange with Paid Return Label
- 360 Days Anytime Worry-Free Warranty
For any questions or concerns regarding your SLLEA AC/DC Adapter, please do not hesitate to contact SLLEA customer support. We are here to help.
You can typically find contact information on the product packaging or through the retailer where the product was purchased. For online purchases, refer to the seller's contact details on the platform.