1. Introduction
Thank you for choosing the FENIFOX Wireless Bluetooth Mouse. This ultra-thin, silent, and rechargeable mouse is designed for portability and convenience, offering seamless connectivity for various devices. Please read this manual carefully to ensure proper use and optimal performance.
Image: Top-down view of the FENIFOX Wireless Bluetooth Mouse.
2. Package Contents
Verify that all items are present in your package:
- 1 x FENIFOX Slim Bluetooth Mouse
- 1 x USB Charging Cable
- 1 x User Manual (this document)
3. Product Overview and Features
The FENIFOX Wireless Bluetooth Mouse is designed for efficiency and portability. Key features include:
- Ultra-Thin and Lightweight Design: Measuring only 0.6 inches thick and weighing 0.1 lbs, made from durable ABS+PC material.
- Silent Click Buttons: Low decibel left and right mouse buttons, ideal for quiet environments.
- Rechargeable Battery: Equipped with a safe and stable lithium polymer battery, offering over 3 weeks of use on a single charge. Features an automatic sleep mode for energy saving.
- Adjustable DPI: Three adjustable DPI levels (800/1200/1600) for varied cursor sensitivity.
- Wide Compatibility: Compatible with devices supporting Bluetooth 3.0 or higher, including PCs, laptops, and tablets. Note: Not compatible with iPhone or iPad.
Image: Dimensions of the FENIFOX mouse, highlighting its flat and slim profile.
Image: The FENIFOX mouse easily fits into a bag, emphasizing its portability for travel.
4. Setup and Connection
Follow these steps to connect your FENIFOX Wireless Bluetooth Mouse to your device:
- Power On: Locate the power switch on the reverse side of the mouse. Slide the switch to the "ON" position. A blue indicator light will illuminate.
- Enter Pairing Mode: Press and hold the "CONNECT" pairing button on the reverse side of the mouse for 3 to 5 seconds. Release the button when the indicator light begins to flash. This indicates the mouse is in pairing mode. Ensure no other mouse buttons are pressed during this step.
- Connect via Bluetooth: On your computer or tablet, enable Bluetooth and search for available devices. Select "BT3.0 Mouse" or "BT5.0 Mouse" (if your device supports Bluetooth 5.0, prioritize BT5.0 Mouse) from the list. Click to pair. If prompted, select "Not use a key" for pairing. The mouse will be ready for use once successfully paired.
Video: Demonstrates the seamless connection and setup process for the FENIFOX Wireless Bluetooth Mouse.
Indicator Lights:
- DPI Light (3 Green Lights): Indicates the current DPI level. One light for 800 DPI, two lights for 1200 DPI, three lights for 1600 DPI.
- Power & Connect & Pairing Light (Blue Light): Illuminates when powered on, flashes during pairing, and indicates connection status.
- Battery Indication Light (Red Light): Flashes red when the battery is low. Stays red during charging and turns off when fully charged.
5. Operating Instructions
Using your FENIFOX Wireless Bluetooth Mouse is straightforward:
- Basic Navigation: Use the mouse on a flat surface to move the cursor. The left and right buttons provide standard click functionality.
- Scroll Wheel: The scroll wheel between the left and right buttons allows for vertical scrolling through documents and web pages.
- Adjusting DPI: Press the "DPI" button on the bottom of the mouse to cycle through the three sensitivity levels: 800 DPI, 1200 DPI, and 1600 DPI. The corresponding green indicator lights will show the selected DPI.
Image: Illustration of the whisper-quiet buttons on the FENIFOX mouse.
Image: The FENIFOX mouse is suitable for various occasions, including travel and quiet work environments.
6. Charging and Battery Maintenance
The FENIFOX mouse features a built-in rechargeable battery:
- Initial Charge: For optimal battery life, fully discharge the mouse before its first charge.
- Charging Process: Turn off the power switch on the bottom of the mouse. Connect the mouse to a USB power source (e.g., laptop, power bank, wall adapter) using the provided USB charging cable. The red battery indicator light will turn on during charging and turn off once fully charged. A full charge typically takes 1-2 hours.
- Use While Charging: The mouse can be used normally while it is charging.
- Power Adapter: Do not use chargers exceeding 5V, as this may cause battery damage.
- Energy Saving: The mouse will automatically enter sleep mode after a period of inactivity to conserve battery life. Move the mouse or click a button to wake it up.
Image: The FENIFOX mouse can be charged using various USB power sources, including a laptop.
7. Troubleshooting
If you encounter issues with your FENIFOX Wireless Bluetooth Mouse, please refer to the following common solutions:
| Problem | Solution |
|---|---|
| Mouse cannot find the Nano receiver. | The mouse connects via Bluetooth; a receiver is not required. If your device is not Bluetooth-enabled, install a Bluetooth adapter first. |
| Unable to search for the mouse via Bluetooth. | Check if your device supports Bluetooth mouse functionality. Ensure Bluetooth is enabled and the mouse is in pairing mode (indicator light flashing). |
| Bluetooth connection is unstable, or the cursor is delayed/jumps. | Check mouse battery voltage; if low, charge it. Reduce background tasks on your device. Minimize environmental interference from other wireless products. |
| What is the default PIN for Bluetooth? | The default PIN for electronic products is "0000", "1234", "1111", or "8888". |
| Mouse does not wake up from sleep mode. | The Bluetooth mouse is not designed to wake up the computer from sleep. Press any key on the laptop keyboard to wake the computer. |
| Bluetooth connection disconnects frequently after successful pairing. | The power saving mode of the device might disconnect the Bluetooth mouse. Adjust power saving and Bluetooth connection settings on your system. |
| Mouse does not work after a period of time. | Check if the power is low and charge the mouse. If the battery is not used up, delete the current paired Bluetooth device record and re-pair the Bluetooth device. |
| The product does not charge or stops charging. | For safety, the product has installed a temperature protection chip. Charging may take a few seconds to resume if the temperature is too high or too low. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | MX106-AU-SL |
| Product Dimensions | 4.52 x 1.97 x 0.55 inches |
| Item Weight | 1.6 ounces |
| Batteries | 1 Lithium Polymer battery (included) |
| Connectivity Technology | Bluetooth |
| Movement Detection Technology | Optical |
| Special Feature | Soundless (Silent Click) |
| Manufacturer | FENIFOX |
9. Warranty and Support
FENIFOX is committed to providing quality products and service. If you have any questions or require support regarding your purchase, please contact us through Amazon:
- Go to Your Orders on Amazon.
- Find your order in the list.
- Select "Problem with order".
- Choose your topic from the displayed list.
- Select "Contact seller".
We will endeavor to resolve your issue promptly.