1. Overview
Husky Mud Guards are designed to provide robust protection for your vehicle's fenders and rocker panels. Constructed from durable thermoplastic, these mud guards offer superior impact resistance and feature Husky Shield Film for an additional layer of paint defense. They are engineered for a precise, tailored fit for specific vehicle models, ensuring comprehensive coverage against road debris.
Figure 1: Husky Liners Rear Mud Guards, Model 59481.
Video 1: Husky Liners - Protection From Life / Built For A Lifetime! This video provides a general overview of Husky Liners products and their protective qualities.
2. Setup (Installation)
These mud guards are designed for easy installation, typically requiring only a few screws and minimal time. No drilling into the vehicle's body is required for most applications, utilizing existing factory mounting points.
2.1. Included Components:
- Rear Dually Mud Guards (2 pieces)
2.2. Recommended Tools:
- Screwdriver or appropriate wrench for existing fasteners
- Cleaning cloth
2.3. Installation Steps:
- Prepare the Vehicle: Ensure the vehicle is parked on a level surface and the parking brake is engaged. It is recommended to clean the area around the wheel wells where the mud guards will be installed.
- Identify Mounting Points: Locate the existing factory screw-in points in the rear wheel wells. These mud guards are custom-fit to align with these points.
- Position the Mud Guard: Hold the mud guard in place against the fender, aligning its mounting holes with the vehicle's factory mounting points.
- Secure the Mud Guard: Insert and tighten the provided or existing screws into the aligned holes. Ensure the mud guard is securely fastened but do not overtighten to avoid damaging the plastic.
- Apply Husky Shield Film (Optional): If included, apply the proprietary Husky Shield Film to the vehicle's paint where the mud guard makes contact to prevent rub wear.
- Repeat for Other Side: Follow the same steps for installing the mud guard on the opposite side of the vehicle.
Figure 2: Mud guard showing tailored fit to the vehicle's fender.
Video 2: Custom Mud Guard Install Example. This video demonstrates the installation process for custom mud guards.
Video 3: How To Install Husky Liners Universal & Custom Mud Guards. A detailed guide on installing Husky Liners mud guards.
3. Operating
Once installed, your Husky Liners Rear Mud Guards will immediately begin protecting your vehicle. They are designed to deflect mud, snow, dirt, rocks, and other road debris that are kicked up by your tires, preventing them from impacting and damaging your vehicle's paint, fender, and rocker panels. This protection helps maintain the aesthetic condition and resale value of your truck.
Figure 3: Mud guards providing protection in challenging road conditions.
Figure 4: Effective deflection of mud and debris by the mud guard.
4. Maintenance
Husky Liners Mud Guards are built for durability and require minimal maintenance. Regular cleaning is recommended to keep them looking their best and to prevent excessive buildup of dirt or grime.
4.1. Cleaning:
- Wash the mud guards with soap and water using a soft brush or cloth.
- For stubborn dirt, a mild automotive cleaner can be used.
- Rinse thoroughly with clean water.
4.2. Inspection:
- Periodically check the mounting screws to ensure they remain tight.
- Inspect the mud guards for any signs of damage, such as cracks or excessive wear, especially after driving in harsh conditions.
5. Troubleshooting
5.1. Loose Fit:
- If the mud guards feel loose, re-tighten all mounting screws. Avoid overtightening.
- Ensure all factory mounting points were utilized during installation.
5.2. Excessive Debris Accumulation:
- While designed to deflect debris, extreme conditions may lead to some accumulation. Regular cleaning as described in the Maintenance section will address this.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | Husky Liners |
| Model Number | 59481 |
| Color | Black |
| Material | Thermoplastic |
| Auto Part Position | Rear |
| Installation Type | Screw-In |
| Item Thickness | 0.25 Inches |
| Item Weight | 4.55 pounds |
| Vehicle Service Type | 2017-2019 Ford F-350 Super Duty DUAL REAR WHEELS, 2018-2019 Ford F-450 Super Duty DUAL REAR WHEELS |
| Automotive Fit Type | Vehicle Specific Fit |
| Special Features | Mud Flaps; Mud Guards |
7. Warranty
Husky Liners products, including these Rear Mud Guards, are proudly made in the USA and come with a Lifetime Guarantee. This means that if you encounter any issues with this or any Husky product, it will be replaced without hassle.
Figure 5: Husky Liners commitment to protection and durability.
8. Support
For further assistance, technical support, or warranty claims, please refer to the official Husky Liners website or contact their customer service department. Detailed contact information can typically be found on the product packaging or the manufacturer's official website.
