Introduction
This manual provides essential information for the installation, operation, and maintenance of your Memphis Audio PRX60 Power Reference Series 6.5" Oversize 2-Way Coaxial Speakers. These speakers are designed to deliver high-quality audio performance with features like a polyurethane surround, PEI dome tweeter, multi-direction pivot tweeter system, and a stealthy black-on-black M-Cone design. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your speakers.
Figure 1: Front view of Memphis Audio PRX60 6.5" Coaxial Speakers.
Setup and Installation
The Memphis Audio PRX60 speakers are designed for straightforward installation in compatible vehicle audio systems. Each package includes two coaxial speakers.
Key Installation Considerations:
- Mounting: These speakers are designed for coaxial mounting, typically in door panels or kick panels. Ensure adequate depth and clearance for the 6.5-inch speaker.
- Wiring: Connect the speakers to your amplifier or head unit using appropriate gauge speaker wire. Pay attention to positive and negative terminals to ensure correct phase.
- Tweeter Adjustment: The multi-direction pivot tweeter system allows for aiming the tweeter for optimal sound staging. Adjust the tweeter angle after installation to direct high frequencies towards the listening position.
- Weather Resistance: While durable, these speakers are not waterproof. Ensure they are installed in locations protected from direct water exposure.
Figure 2: Side view of the PRX60 speaker, highlighting wiring terminals and compact design.
Installation Overview Video:
For a comprehensive overview of a Memphis Audio system installation, including speaker integration, please refer to the official product video below. This video demonstrates the process within a Ford Bronco, showcasing how various components, including speakers, are installed to achieve an enhanced audio experience.
Video 1: Memphis Audio Ford Bronco Upgrade Kit Product Overview. This video provides a general guide to installing Memphis Audio components, including speakers, in a vehicle.
Operating Your Speakers
Once properly installed, your Memphis Audio PRX60 speakers are ready to deliver a rich and clear audio experience.
- Sound Quality: The polyurethane surround and PEI dome tweeter work in conjunction to produce tight, punchy mids and detailed, crystal-clear high frequencies.
- Tweeter Aiming: Utilize the multi-direction pivot tweeter to fine-tune the soundstage. Experiment with different angles to achieve the best sound dispersion and imaging for your listening position.
- Power Handling: These speakers are designed to handle up to 100 Watts of maximum output power. Ensure your amplifier's output matches the speaker's power handling capabilities to prevent damage and achieve optimal sound.
Figure 3: Detailed view of the PRX60 speaker cone and tweeter, showcasing the M-Cone design.
Maintenance
Proper maintenance will ensure the longevity and continued performance of your Memphis Audio PRX60 speakers.
- Cleaning: Use a soft, dry cloth to wipe down the speaker grilles and surrounds. Avoid using harsh chemicals or abrasive cleaners.
- Environmental Protection: While featuring weather-resistant materials, avoid prolonged exposure to extreme temperatures, direct sunlight, and excessive moisture. These speakers are not fully waterproof.
- Connection Check: Periodically inspect all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to degraded sound quality or speaker damage.
Troubleshooting
If you encounter issues with your Memphis Audio PRX60 speakers, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| No Sound from Speakers | Loose or incorrect wiring; Amplifier off or faulty; Head unit issue. | Check all speaker wire connections. Ensure amplifier is powered on and functioning. Verify head unit output. |
| Distorted Sound | Overpowering speakers; Incorrect amplifier gain settings; Damaged speaker. | Reduce volume or amplifier gain. Check speaker for physical damage. Ensure amplifier power matches speaker rating. |
| Weak or Muffled Sound | Incorrect phase wiring; Obstruction in front of speaker; Low power. | Verify correct positive/negative wiring. Ensure no obstructions. Check amplifier output. |
If these steps do not resolve the issue, please contact a qualified car audio technician or Memphis Audio customer support.
Specifications
| Feature | Specification |
|---|---|
| Model Name | PRX60 |
| Speaker Type | Coaxial |
| Speaker Size | 6.5 Inches |
| Speaker Maximum Output Power | 100 Watts |
| Frequency Response | 20000 Hz |
| Included Components | 2 Coaxial Speakers |
| Item Weight | 4.2 Pounds |
| Product Dimensions | 17.2 x 8.3 x 4.2 inches |
| Manufacturer | Memphis Audio |
| UPC | 702588206651 |
Warranty and Support
Your Memphis Audio PRX60 speakers come with a Limited Warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Memphis Audio website.
Customer Support:
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Memphis Audio customer support.
- Online Resources: Visit the Memphis Audio Store on Amazon for additional product information and resources.
- Protection Plans: Consider purchasing an extended protection plan for additional coverage beyond the manufacturer's warranty. Options such as 2-Year and 3-Year Protection Plans are available.
