Introduction
This manual provides essential instructions for the safe and effective use of your Fujifilm Instax Square Camera SQ10. Please read this manual thoroughly before using the camera and keep it in a safe place for future reference. The Instax SQ10 is a hybrid instant camera that combines digital imaging technology with instant film printing, allowing you to preview, edit, and select images before printing.
Safety Information
Always observe the following safety precautions to prevent injury or damage to the camera.
- Do not disassemble, modify, or attempt to repair the camera.
- Keep the camera away from water and moisture.
- Avoid exposing the camera to extreme temperatures or direct sunlight for extended periods.
- Use only specified batteries and film.
- Keep out of reach of children.
- Dispose of batteries and film according to local regulations.
What's in the Box
Verify that all items are present in the package:
- Instax Square SQ10 Camera
- Lithium Battery
- USB Cable
- Strap
- User Manual (this document)
- USA Warranty Information
Camera Parts and Functions
Figure 1: Front View. This image displays the front of the Instax Square SQ10 camera, highlighting the central lens, the flash unit above it, and the "instax SQ10" branding.
Figure 2: Rear View. This image shows the back of the Instax Square SQ10 camera, featuring the large LCD screen and the circular control dial with "MENU OK" button in the center.
- Lens: Captures images.
- Flash: Provides illumination in low-light conditions.
- LCD Screen: Displays captured images, menu options, and camera settings.
- Control Dial: Navigates menus and selects options.
- Shutter Buttons: Two buttons on either side of the lens for taking photos.
- Film Ejection Slot: Where printed photos emerge.
- Battery Compartment: Houses the rechargeable lithium battery.
- MicroSD Card Slot: For expanding storage capacity.
Setup
1. Inserting the Battery
- Open the battery compartment cover located on the bottom of the camera.
- Insert the supplied lithium battery, ensuring correct orientation according to the polarity indicators.
- Close the battery compartment cover securely.
- Charge the battery using the provided USB cable and a compatible USB power adapter. The charging indicator will light up during charging and turn off when complete.
2. Loading Instax Square Film
- Open the film compartment cover on the back of the camera.
- Align the yellow mark on the film pack with the yellow mark on the camera.
- Insert the film pack straight into the compartment. Do not press down on the film pack.
- Close the film compartment cover. The camera will automatically eject the black film cover sheet.
Figure 3: Film Ejection. This image shows the Instax Square SQ10 camera with the protective black film cover sheet being ejected after a new film pack has been loaded.
3. Inserting a MicroSD Card (Optional)
The camera has internal memory, but a MicroSD card can be used for additional storage.
- Locate the MicroSD card slot, usually near the battery compartment.
- Insert the MicroSD card with the contacts facing down until it clicks into place.
4. Initial Settings
Upon first power-on or after a battery change, you may need to set the date and time. Follow the on-screen prompts using the control dial.
Operating the Camera
1. Powering On/Off
Press and hold the power button (usually located near the lens or on the side) to turn the camera on or off.
2. Taking Pictures
- Frame your shot using the LCD screen.
- Press one of the shutter buttons to capture the image.
- The captured image will appear on the LCD screen for review.
3. Using the LCD Screen and Control Dial
The LCD screen displays various information and allows interaction with the camera's functions.
- Navigation: Use the outer ring of the control dial to move through menu options or images.
- Selection: Press the central "MENU OK" button to confirm a selection or access the main menu.
- Back: The curved arrow button typically functions as a "back" or "cancel" button.
4. Applying Filters and Editing
After taking a picture, you can apply various creative filters and make basic edits before printing.
- After capturing an image, select the editing icon (often represented by a brush or palette).
- Use the control dial to browse through available filters (e.g., Vivid, Sepia, Monochrome) and adjustments (e.g., brightness, vignette).
- Preview the changes on the LCD screen.
- Confirm your selections.
5. Printing Photos
The hybrid nature of the SQ10 allows you to choose which photos to print.
- After capturing or selecting an image from memory, press the print button (often indicated by a printer icon).
- Confirm the print command. The camera will then eject the printed photo.
- Allow the photo to develop for a few minutes. Do not shake the print.
6. Saving Images
Images are automatically saved to the internal memory or the inserted MicroSD card.
- You can review saved images by entering playback mode (often indicated by a play icon).
- To transfer images to a computer, connect the camera via USB or remove the MicroSD card and insert it into a card reader.
Maintenance
1. Cleaning the Camera
- Wipe the camera body with a soft, dry cloth.
- For the lens, use a lens cleaning cloth and lens cleaning fluid if necessary. Avoid touching the lens directly.
- Keep the film ejection slot clear of dust and debris.
2. Battery Care
- Recharge the battery regularly.
- If not using the camera for an extended period, remove the battery.
- Store the battery in a cool, dry place.
3. Film Storage
- Store unused film packs in a cool, dry place, away from direct sunlight and high temperatures.
- Do not open the film pack until you are ready to load it into the camera.
Troubleshooting
| Problem | Solution |
|---|---|
| Camera does not power on. | Ensure the battery is fully charged and correctly inserted. |
| Film does not eject. | Check if film is loaded correctly. Ensure there is film remaining in the pack. |
| Printed photos are too dark/light. | Adjust brightness settings before printing. Ensure flash is used appropriately for lighting conditions. |
| "Card Error" message. | Reinsert the MicroSD card. Try formatting the card (this will erase all data). Use a different MicroSD card. |
Specifications
- Model Name: Instax Square SQ10 Instant Camera
- Dimensions (L x W x H): 6.5 x 6.5 x 5 inches
- Item Weight: 1 pound
- Film Format Type: Instant (Instax Square)
- Max Shutter Speed: 10 Seconds
- Special Feature: Hybrid Instant Camera (Digital capture with instant print)
- Power Source: Lithium Battery (included)
- Storage: Internal memory, MicroSD card slot
- Manufacturer: Fujifilm
- Date First Available: April 19, 2017
Warranty and Support
Your Fujifilm Instax Square Camera SQ10 comes with a USA Warranty. For detailed warranty terms, service, or technical support, please refer to the included warranty information card or visit the official Fujifilm Instax website.
