Introduction
This manual provides detailed instructions for the proper use and maintenance of your Gree EVO+ Remote Control, model 305100502. This remote is designed as a genuine replacement for various Gree Evo+ Ductless Mini Split Systems. Please read this manual thoroughly before operating the remote control to ensure optimal performance and longevity.
Image: Angled view of the Gree EVO+ Remote Control, showing its silver metallic finish and button layout.
Setup
Battery Installation
The remote control requires two (2) AAA batteries for operation. Ensure correct polarity when inserting the batteries.
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards or press the latch and lift to open.
- Insert two new AAA batteries, matching the (+) and (-) terminals as indicated inside the compartment.
- Replace the battery compartment cover, ensuring it clicks securely into place.
Note: Remove batteries if the remote control will not be used for an extended period to prevent leakage and damage.
Initial Use
This remote control is a genuine replacement part and is typically ready for use with compatible Gree Evo+ mini-split systems immediately after battery installation. No complex pairing procedure is usually required. Point the remote control towards the indoor unit and press the power button to test functionality.
Operating Instructions
Familiarize yourself with the buttons and display indicators for effective control of your Gree mini-split system.
Image: Front view of the Gree EVO+ Remote Control with its LCD display active, showing temperature, fan speed, and mode icons.
Button Functions
- Power Button (): Turns the unit ON or OFF.
- FAN Button: Adjusts the fan speed (Auto, Low, Medium, High).
- MODE Button: Cycles through operating modes (Auto, Cool, Dry, Heat, Fan).
- I FEEL Button: Activates the 'I FEEL' function, which senses the temperature at the remote's location for more precise comfort control.
- Temperature Adjustment Buttons ( / ): Increases or decreases the set temperature.
- CLOCK Button: Sets the current time.
- TIMER ON Button: Sets the time for the unit to turn ON automatically.
- TIMER OFF Button: Sets the time for the unit to turn OFF automatically.
- X-FAN Button: Activates the X-FAN function, which continues the fan operation for a short period after shutdown to dry the indoor coil and prevent mold.
- TEMP Button: Toggles the display of the set temperature, indoor temperature, or outdoor temperature (if applicable).
- TURBO Button: Activates rapid cooling or heating for a quick temperature change.
- SLEEP Button: Activates sleep mode, which adjusts temperature and fan speed for comfortable sleep and energy saving.
- LIGHT Button: Turns the display light on the indoor unit ON or OFF.
Display Indicators
The LCD screen on the remote control displays various icons and numbers indicating the current settings and status of the air conditioning unit. These may include:
- Set Temperature: The desired room temperature.
- Operating Mode Icons: Auto, Cool, Dry, Heat, Fan.
- Fan Speed Indicator: Bars or numbers indicating fan speed.
- Timer ON/OFF Indicators: Shows if a timer is set.
- Sleep Mode Icon: Indicates sleep mode is active.
- I FEEL Indicator: Shows when the 'I FEEL' function is active.
Maintenance
Cleaning the Remote Control
To maintain the appearance and functionality of your remote control:
- Wipe the surface with a soft, dry cloth.
- For stubborn dirt, slightly dampen the cloth with water and a mild detergent, then wipe dry immediately.
- Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the plastic and electronic components.
Battery Replacement
Replace the batteries when the display becomes dim or the remote control's range decreases. Follow the battery installation steps outlined in the 'Setup' section. Always replace both batteries at the same time with new AAA batteries.
Storage
If the remote control will not be used for an extended period, remove the batteries to prevent potential leakage and corrosion. Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
If you encounter issues with your remote control, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not responding | Dead or incorrectly installed batteries. Obstruction between remote and unit. Remote out of range. | Replace batteries, ensuring correct polarity. Remove any obstructions. Move closer to the indoor unit. |
| Display is dim or blank | Low battery power. | Replace batteries. |
| Unit does not respond to specific commands | Incorrect mode selected. Remote malfunction. | Ensure the correct operating mode is selected. If the issue persists after battery replacement, the remote may require replacement. |
If troubleshooting steps do not resolve the issue, please contact Gree customer support or your authorized service provider.
Specifications
- Model Number: 305100502
- Product Dimensions: 6 x 2.2 x 0.6 inches
- Item Weight: 3.2 ounces
- Batteries Required: 2 x AAA (not included)
- Compatible Devices: Gree Evo+ Ductless Mini Split Systems, including models: GWH09AB-D3DNA2D-I, GWH12AB-D3DNA2D-I, GWH18AC-D3DBA2D-I, GWH24AB-D3DNA2D/I, GWH09AB-A3DNA1B-I, GWH12AB-A3DNA1B-I, GWH12AB-D3DNA1B-I, GWH18AC-D3DNA1B-I, GWH24AC-D3DNA1B-I.
- Color: Silver Metallic
- Manufacturer: Gree Electric Appliances
Warranty and Support
For information regarding the warranty of your Gree EVO+ Remote Control, please refer to the documentation provided with your original Gree mini-split system or contact the seller from whom you purchased the remote. Warranty terms may vary.
For technical support or further assistance, please visit the official Gree website or contact Gree customer service directly. You may also reach out to your authorized Gree dealer or installer.
