Introduction
This manual provides comprehensive instructions for the assembly, safe operation, and proper maintenance of your SoBuy OGS28-HB Ergonomic Rocking Lounger. Please read this manual thoroughly before using the product to ensure correct usage and to maximize its lifespan. Keep this manual for future reference.
Image: The SoBuy OGS28-HB rocking lounger, featuring a turquoise fabric and a comfortable headrest, positioned on a wooden deck next to a swimming pool. A decorative cushion and a small side table with drinks are also visible.
Safety Information
- Always follow all assembly instructions carefully to prevent injury or damage.
- Do not exceed the maximum weight limit of 150 kg (approximately 330 lbs). Overloading can cause structural failure and injury.
- Ensure all screws and fasteners are securely tightened before each use. Periodically check for loose connections.
- Use the lounger on a stable, level surface to prevent tipping.
- Keep children and pets away from the lounger during assembly.
- Avoid placing the lounger near open flames or extreme heat sources.
- Do not stand on the lounger.
Package Contents
Before beginning assembly, verify that all components are present and undamaged. The package should contain:
- SoBuy OGS28-HB Rocking Lounger Frame (Metal)
- Teslin Fabric Seat and Backrest
- Adjustable Head Pillow
- Assembly Hardware (screws, caps, etc.)
- Assembly Instructions Manual
Image: An exploded view or layout of the individual components of the SoBuy OGS28-HB rocking lounger, including the metal frame pieces, fabric seat, and headrest, ready for assembly.
Assembly Instructions
Assembly of the SoBuy OGS28-HB rocking lounger is designed to be straightforward and typically takes about 15 minutes. No additional tools are required. For optimal ease, it is recommended to have two people for assembly, especially when attaching the fabric.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Verify against the package contents list.
- Assemble Frame: Connect the numbered metal frame pieces according to the illustrated guide provided in your package. Ensure all connections are aligned correctly.
- Attach Fabric: Slide the Teslin fabric into the designated grooves or channels on the frame. This step may require some tension and is easier with two people. Ensure the fabric is evenly stretched and secured.
- Secure Fasteners: Insert and tighten all screws and fasteners as indicated in the instructions. Ensure they are snug but do not overtighten.
- Install Head Pillow: Attach the adjustable head pillow to the top section of the lounger.
- Final Check: Before first use, gently rock the lounger and ensure all parts are stable and secure.
Image: A detailed diagram illustrating the dimensions (length 150 cm, width 62 cm, height 86 cm) and the ergonomic, curved design of the SoBuy OGS28-HB rocking lounger, highlighting its structure and features like the side pocket.
Assembly Video
Video: An official product video demonstrating the assembly process and key features of the SoBuy OGS28 Metal Rocking Chair. This video provides a visual guide to help with setup.
Operating Instructions
The SoBuy OGS28-HB rocking lounger is designed for comfort and relaxation. Its ergonomic shape supports your body, and the rocking motion provides a soothing experience.
- Using the Rocking Function: Gently shift your weight to initiate the rocking motion. The lounger is designed to rock smoothly and safely.
- Adjusting the Head Pillow: The head pillow can be adjusted up or down along the backrest to find your preferred position for neck and head support.
- Side Storage Pocket: Utilize the integrated side pocket to conveniently store small items such as books, magazines, a mobile phone, or a drink.
Image: A close-up view of the practical side storage pocket on the SoBuy OGS28-HB rocking lounger, demonstrating its utility for holding personal items.
Image: A detailed shot of the adjustable head pillow on the SoBuy OGS28-HB rocking lounger, highlighting its position and design for comfort.
Maintenance
Proper care will extend the life and appearance of your rocking lounger.
- Cleaning: Clean the Teslin fabric and metal frame with a damp cloth and mild soap. Avoid harsh chemicals or abrasive cleaners, which can damage the materials.
- Drying: Allow the lounger to air dry completely after cleaning or exposure to rain to prevent mildew and rust.
- Storage: While the lounger is designed for outdoor use, storing it in a dry, sheltered area during prolonged periods of non-use or harsh weather conditions (e.g., winter) will help preserve its condition.
- Inspection: Periodically inspect the frame and fabric for any signs of wear, damage, or loose fasteners. Tighten any loose screws as needed.
Image: A close-up of the teal Teslin fabric, showing its breathable mesh texture, which is ideal for outdoor use and easy to clean.
Troubleshooting
If you encounter any issues with your SoBuy OGS28-HB rocking lounger, please refer to the following common solutions:
- Instability/Wobbling: Ensure the lounger is placed on a flat, even surface. Check all assembly screws and tighten them if loose.
- Difficulty Rocking: Verify that the rocking base is clear of obstructions and that the lounger is on a smooth surface.
- Fabric Sagging: Over time, fabric may stretch slightly. Ensure it is properly seated in the frame grooves. If sagging persists, contact customer support.
- Missing Parts: If any parts were missing upon delivery, please contact SoBuy customer service immediately for assistance.
Specifications
| Feature | Detail |
|---|---|
| Brand | SoBuy |
| Model Name | SoBuy OGS28-HB |
| Color | Blue (Note: Other colors available, OGS28-HB refers to the blue variant) |
| Material | Metal frame with anti-rust finish, Teslin fabric seat |
| Product Dimensions (D x W x H) | 158 cm x 62 cm x 86 cm (62.2 x 24.4 x 33.8 inches) |
| Item Weight | 12 Kilograms (26.4 lbs) |
| Maximum Load Capacity | 150 Kilograms (330 lbs) |
| Special Features | Armrest, Reclinable (rocking motion) |
| Recommended Use | Sun lounger, Outdoor use |
| Assembly Required | Yes (Illustrated instructions, no tools needed) |
| Number of Reclining Positions | 3 (Implied by rocking motion and ergonomic design) |
Image: A rear view of the SoBuy OGS28-HB rocking lounger, showcasing the structure of its metal frame and the attachment of the Teslin fabric.
Warranty and Support
SoBuy is committed to providing high-quality products and customer satisfaction.
- Returns: If you are not satisfied with your product or if there is a problem, you can contact SoBuy for a free return voucher.
- Instructions: Instructions are included in every package. You can also scan the QR code on the packaging or contact SoBuy for digital instructions.
- Contact: For any questions, concerns, or support needs, please contact SoBuy-Shop-FR directly.
For more information about SoBuy products and services, please visit the official SoBuy Store on Amazon.