1. Introduction
This manual provides essential instructions for the safe and effective use of your ABLEGRID AC/DC Adapter, Model AMU-050200A. This adapter is designed to provide reliable power to compatible devices, including Wilson Mobile Pro In-Building Boosters (models 859953, 901128, 859952).
Key features include a wide input voltage range (100-240VAC) for worldwide use and built-in protection mechanisms to ensure device safety.
2. Safety Information
Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or damage to the product or connected devices.
- Do not expose to liquids: Keep the adapter away from water, rain, or excessive moisture.
- Indoor use only: This adapter is intended for indoor use in dry locations.
- Proper ventilation: Ensure adequate ventilation around the adapter. Do not cover it or place it in an enclosed space that could restrict airflow.
- Avoid damage: Do not use the adapter if the cord or plug is damaged. Do not attempt to open or repair the adapter.
- Correct voltage: Ensure the wall outlet voltage is within the specified input range (100-240VAC).
- Compatibility: Only connect the adapter to devices that require the specified output voltage and current. Refer to your device's manual for power requirements.
- Unplug when not in use: Disconnect the adapter from the power outlet when not in use for extended periods.
3. Setup Instructions
Follow these steps to set up your ABLEGRID AC/DC Adapter:
- Verify Compatibility: Before connecting, confirm that your device (e.g., Wilson Mobile Pro Booster) requires a 5V DC input and uses a Micro-USB power connector. Check the device's power specifications.
- Connect to Device: Insert the Micro-USB connector of the adapter cable firmly into the power input port of your compatible device.
- Connect to Power Outlet: Plug the AC prongs of the adapter into a standard wall power outlet (100-240VAC, 50/60Hz).
- Power On: Once connected, your device should receive power. Refer to your device's manual for specific power-on procedures.
Figure 1: ABLEGRID AC/DC Adapter showing the main unit, attached cable, and Micro-USB connector.
4. Operating Instructions
The ABLEGRID AC/DC Adapter operates automatically once connected to a power source and a compatible device. No user interaction is required for its basic function.
- Ensure the adapter is securely plugged into both the wall outlet and the device.
- The adapter is designed for continuous operation within its specified limits.
- If the device is not powering on, refer to the Troubleshooting section.
Figure 2: Side view of the ABLEGRID AC/DC Adapter, highlighting the compact design and cable connection.
5. Maintenance
Proper maintenance ensures the longevity and safe operation of your adapter.
- Cleaning: Always unplug the adapter from the wall outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials.
- Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling the cable to prevent damage.
- Inspection: Periodically inspect the adapter, cable, and connectors for any signs of damage, such as cuts, fraying, or bent pins. If damage is observed, discontinue use and replace the adapter.
6. Troubleshooting
If you encounter issues with your ABLEGRID AC/DC Adapter, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not powering on. | Adapter not properly plugged in. | Ensure the adapter is securely plugged into both the wall outlet and the device. |
| Wall outlet is not active. | Test the wall outlet with another known working device. | |
| Device is incompatible or requires more power. | Verify your device's power requirements match the adapter's specifications (5V, 2A). | |
| Adapter feels unusually hot. | Overload or poor ventilation. | Unplug immediately. Ensure the device is compatible. Provide adequate ventilation around the adapter. If overheating persists, discontinue use. |
| Visible damage to adapter or cable. | Physical damage. | Discontinue use immediately. Replace the adapter. |
If the problem persists after attempting these solutions, please contact customer support.
7. Specifications
Technical specifications for the ABLEGRID AC/DC Adapter, Model AMU-050200A:
- Model: AMU-050200A
- Input Voltage: 100-240VAC, 50/60Hz
- Output Voltage: 5V DC
- Output Current: 2A (2000mA)
- Power Source: Corded Electric
- Main Power Connector Type: US 2-Pin Plug
- Device Connector Type: Micro-USB
- Special Feature: Travel-friendly design
- Protection Features:
- OVP (Over Voltage Output Protection)
- OCP (Over Current Output Protection)
- SCP (Short Circuit Output Protection)
Figure 3: Top view of the ABLEGRID AC/DC Adapter, displaying the product label with model and electrical specifications.
8. Warranty and Support
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official ABLEGRID website. Keep your purchase receipt as proof of purchase for warranty claims.
If you require technical assistance or have questions regarding your ABLEGRID AC/DC Adapter, please contact ABLEGRID customer service through their official channels.
