Turbosound FLASHLINE MONITORS TFX122M-AN

1. Introduction

The Turbosound TFX122M-AN is a FLASHLINE series 12" 2-Way 1100W stage monitor designed for reliable performance and full-range reproduction of speech and music. It is suitable for various venues including concert halls, houses of worship, clubs, and theaters. This monitor features a Class-D amplifier, a custom-engineered 12" high-excursion woofer, and a 1" high-frequency compression driver, delivering a frequency response of 68 Hz to 20 kHz. Integrated KLARK TEKNIK DSP provides delay, equalization, and limiting functions, controllable via onboard buttons, LCD display, or remote USB connection. Connectivity options include combo XLR/1/4" input, XLR output, and ULTRANET in/thru for 16 channels of 24-bit digital audio over Cat5 cable. Its low-profile design ensures minimal on-stage visibility, and its durable plywood, composite, and steel construction includes an integrated carry handle and pole mount socket for easy transport and setup.

Figure 1: Front view of the TFX122M-AN Stage Monitor, showcasing its robust grille and compact design.

2. Important Safety Instructions

Please read and follow all safety instructions to prevent electric shock, fire, or injury.

• Power Source: Connect the unit only to a power supply of the type described in this manual or marked on the unit.
• Grounding: Ensure the unit is properly grounded to prevent electric shock. Do not defeat the safety purpose of the polarized or grounding-type plug.
• Ventilation: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
• Heat: Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Water and Moisture: Do not use this apparatus near water or expose it to dripping or splashing.
• Cleaning: Clean only with a dry cloth.
• Servicing: Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
• Cables: Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

3. Key Features

• High-frequency Compression driver to produce a frequency response of 68 Hz to 20 kHz.
• Equipped with an efficient and Lightweight KLARK TEKNIK Class-D power amplifier.
• A high degree of control over the loudspeaker system's performance is managed by a sophisticated DSP.
• Co-Axial 1,100 Watt 2 Way 12" design.

4. What's in the Box

The Turbosound TFX122M-AN package includes the following components:

• One (1) Turbosound TFX122M-AN Co-axial 1,100 Watt 2 Way 12" Stage Monitor.

5. Setup

Follow these steps to set up your TFX122M-AN stage monitor:

1. Placement: Position the monitor on a stable surface or use the integrated pole mount socket for stand mounting. Ensure adequate space for ventilation around the unit.
2. Power Connection: Connect the supplied AC power cord to the AC POWER inlet on the rear panel of the monitor. Plug the other end into a suitable grounded power outlet.
3. Audio Input: Connect your audio source (e.g., mixing console, microphone) to the AUDIO INPUT combo jack (XLR or 1/4") on the rear panel.
4. Audio Output (Linking): If linking to other monitors, connect an XLR cable from the AUDIO LINK output to the input of the next monitor.
5. ULTRANET Connection (Optional): For digital audio networking, connect a Cat5 cable from your ULTRANET source to the ULTRANET IN port. Use the ULTRANET THRU port to daisy-chain to other ULTRANET compatible devices.
6. USB Connection (Optional): For remote control and DSP configuration, connect a USB cable from your computer to the USB port on the rear panel.

Figure 2: Rear view of the TFX122M-AN, highlighting the audio input/output, ULTRANET, and power connections.

Figure 3: Detailed view of the control panel, including the LCD display, navigation buttons, and USB port.

6. Operating Instructions

Once the monitor is set up, you can begin operation:

1. Power On: Flip the main power switch located near the AC inlet to the 'ON' position. The LCD display will illuminate.
2. DSP Control: Use the 'PROCESS', 'SETUP', 'EXIT', and 'ENTER' buttons along with the rotary encoder to navigate the DSP menu on the LCD display.
3. Adjusting Settings:
   • Volume/Gain: Adjust the input gain as needed to achieve optimal signal level without clipping.
   • Equalization (EQ): Access the EQ settings to fine-tune the frequency response for your specific environment or application.
   • Delay: Apply delay settings if necessary for proper time alignment in multi-speaker setups.
   • Limiting: The built-in limiter protects the speaker from excessive signal levels. Monitor the limiter indicator on the display.
4. Remote Control (USB): For advanced control and preset management, connect the monitor to a computer via USB and use the dedicated Turbosound software (if available) to manage settings remotely.
5. ULTRANET Operation: If using ULTRANET, ensure your digital audio source is properly configured to send signals to the monitor. The monitor will automatically receive the assigned channels.

7. Maintenance

Proper maintenance ensures the longevity and optimal performance of your TFX122M-AN monitor.

• Cleaning: Regularly wipe the exterior of the monitor with a soft, dry, lint-free cloth. Do not use abrasive cleaners, waxes, or solvents.
• Ventilation: Ensure that the ventilation openings are clear of dust and debris. Periodically check and clean the grille if necessary.
• Storage: When not in use for extended periods, store the monitor in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to use a protective cover.
• Cable Inspection: Periodically inspect all cables (power, audio, ULTRANET, USB) for any signs of wear, damage, or fraying. Replace damaged cables immediately.

8. Troubleshooting

This section provides solutions to common issues you might encounter.

9. Technical Specifications

Detailed specifications for the Turbosound TFX122M-AN Stage Monitor.

10. Warranty and Support

The Turbosound TFX122M-AN comes with a limited warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official Turbosound website.

For technical support, service, or replacement parts, please contact Turbosound customer service or visit the TURBOSOUND Store on Amazon for more information and resources.