Summer Waves 12' Ft. Quick Set Inflatable Above Ground Pool with Filter Pump User Manual

Introduction

Thank you for choosing the Summer Waves 12' Ft. Quick Set Inflatable Above Ground Pool with Filter Pump. This manual provides essential information for the safe and efficient setup, operation, maintenance, and troubleshooting of your new pool. Please read this manual thoroughly before installation and retain it for future reference.

Safety Information

Always prioritize safety when using any pool. Failure to follow these instructions can result in serious injury or death. This pool is intended for outdoor use only. Adult supervision is required at all times when children are in or near the pool. Do not dive or jump into the pool. Ensure the pool is set up on a level surface to prevent collapse.

• Never leave children unattended in or around the pool.
• Keep all electrical cords and devices away from the pool area.
• Do not allow rough play or diving.
• Regularly check the pool for damage or leaks.
• Maintain proper water chemistry to ensure a safe swimming environment.
• Ensure all users are aware of emergency procedures.

Package Contents

Verify that all components are present before beginning assembly:

• 12' Ft. Quick Set Inflatable Pool Liner
• Filter Pump System
• Filter Cartridge
• Hoses and Clamps for Filter Pump Connection
• Instruction Manual (this document)

If any parts are missing or damaged, do not proceed with assembly. Contact Summer Waves customer support for assistance.

Setup

Proper site preparation and assembly are crucial for the stability and longevity of your pool.

1. Site Selection and Preparation

Choose a firm, level surface free of sharp objects, debris, or excessive slopes. A slight incline can cause the pool to bulge or collapse. Clear the area of grass, roots, and rocks. Consider placing a ground cloth or tarp (not included) under the pool for added protection.

2. Unfolding the Pool Liner

Carefully unfold the pool liner in the chosen area. Ensure the drain plug is facing the desired drainage location. Smooth out any wrinkles on the bottom of the pool as much as possible before filling.

Image: The Summer Waves 12-foot Quick Set Inflatable Pool, shown filled with water and the filter pump connected, ready for use.

3. Inflating the Top Ring

Locate the air valve on the top inflatable ring. Use an air pump (not included) to inflate the ring until it is firm to the touch but not over-inflated. Do not use an air compressor designed for high-pressure items like tires, as this can damage the ring.

Image: A close-up view of the blue inflatable top ring of the Summer Waves pool, showing its smooth texture.

4. Connecting the Filter Pump

Attach the filter pump hoses to the inlet and outlet fittings on the pool liner. Secure them with the provided clamps. Ensure all connections are tight to prevent leaks. Place the filter pump on a stable, level surface at least 10 feet away from the pool, following local electrical codes.

Image: A detailed view of the white filter pump unit connected to the blue pool liner via two corrugated hoses and white fittings.

5. Filling the Pool

Begin filling the pool with water. As the water level rises, the inflatable top ring will float, and the pool walls will rise. Continuously smooth out any wrinkles on the bottom of the pool from the center outwards. Stop filling when the water reaches the fill line indicated on the pool liner, typically just below the inflatable ring.

Image: The Summer Waves 12-foot Quick Set Inflatable Pool in a green backyard setting, with several adults and children enjoying the water, demonstrating its capacity and family use.

Operating the Filter Pump

The included filter pump helps keep your pool water clean. Ensure the pump is connected to a grounded electrical outlet. Do not operate the pump when the pool is in use. Refer to the separate filter pump manual for detailed operating instructions specific to your pump model.

• Initial Operation: After filling the pool, prime the pump by opening the air release valve on top of the filter housing until water flows out. Close the valve and plug in the pump.
• Daily Operation: Run the filter pump for at least 4-6 hours daily to ensure proper water circulation and filtration.
• Filter Cartridge: The filter cartridge should be rinsed with a garden hose every few days and replaced every 2-4 weeks, depending on usage and water quality.

Maintenance

Regular maintenance is essential for clean water and extending the life of your pool.

Water Chemistry

Test your pool water regularly (daily or every other day) using a pool test kit. Maintain the following levels:

• pH: 7.4 - 7.6
• Free Chlorine: 1 - 3 ppm (parts per million)
• Alkalinity: 80 - 120 ppm

Adjust chemicals as needed. Always add chemicals to water, never water to chemicals, and follow manufacturer's instructions for all pool chemicals.

Cleaning the Pool

• Skimming: Use a skimmer net to remove leaves, insects, and other debris from the water surface daily.
• Vacuuming: Periodically vacuum the bottom of the pool to remove settled dirt and debris.
• Wall Cleaning: Brush the pool walls regularly to prevent algae buildup.

Filter Pump Care

Turn off and unplug the pump before performing any maintenance. Regularly inspect hoses and connections for leaks or damage. Clean the filter cartridge as described in the "Operating the Filter Pump" section.

Troubleshooting

For issues not listed here, please contact Summer Waves customer support.

Storage

At the end of the swimming season or when not in use for an extended period, properly store your pool to prevent damage.

1. Drain all water from the pool using the drain plug.
2. Clean and dry the pool liner thoroughly to prevent mold and mildew.
3. Deflate the top ring and disassemble the filter pump.
4. Clean and dry all pump components and hoses.
5. Store the pool and pump in a cool, dry place, protected from direct sunlight and extreme temperatures.

Specifications

Warranty and Support

For information regarding product warranty, please refer to the documentation included with your purchase or visit the official Summer Waves website. For technical support, replacement parts, or any other inquiries, please contact Summer Waves customer service.

Note: Specific warranty terms and contact information may vary by region and purchase date.