ASOKO Under Cabinet LED Lighting - Model UNO-UT (12-Inch, Daylight White) Instruction Manual

1. Introduction

This manual provides instructions for the ASOKO UNO-UT 12-inch Under Cabinet LED Lighting. This versatile light strip is designed to provide bright, dimmable illumination for various indoor spaces, enhancing visibility and ambiance.

2. Product Features

• Bright Illumination: Provides 500 Lumens of Daylight White (5000K) light.
• 3-Level Dimmable: Easily adjust brightness to 0%, 50%, or 100% with a silicone dimmer switch.
• Memory Function: Retains the last brightness setting used.
• Easy Installation: Features built-in magnets for attachment to magnetic surfaces, or use included L-shaped/round iron sheets and 3M stickers for non-magnetic surfaces.
• USB Powered: Conveniently powered via USB, includes a 5V2A adapter and 4.9ft cable.
• Smart Plug/Timer Compatible: Can be used with smart plugs or timers for on/off control.
• Low Profile Design: Slim and discreet, suitable for various applications.

3. What's in the Box

• ASOKO UNO-UT 12-Inch LED Light Bar
• USB Power Cable with Dimmer Switch
• 5V 1.2A Adapter (UL Listed Plug)
• 3M Adhesive Stickers
• L-shaped and Round Iron Sheets (for magnetic mounting on non-magnetic surfaces)

4. Setup & Installation

The ASOKO UNO-UT LED light bar offers flexible installation options to suit your needs.

4.1 Magnetic Installation

The light bar has built-in magnets. If your desired surface (e.g., metal cabinet, refrigerator) is magnetic, simply place the light bar directly onto it. For non-magnetic surfaces, use the provided L-shaped or round iron sheets with 3M adhesive stickers.

1. Clean the surface where you intend to mount the light.
2. Peel off the protective film from one side of the 3M adhesive sticker.
3. Attach the adhesive side to the L-shaped or round iron sheet.
4. Peel off the remaining protective film from the other side of the 3M adhesive sticker.
5. Firmly press the iron sheet onto your desired clean surface.
6. Align the light bar with the installed iron sheet and allow the magnets to secure it in place.

This method allows for easy removal and reattachment of the light bar for charging or repositioning.

4.2 Power Connection

Connect the USB power cable to the light bar. Plug the USB end into the provided 5V 1.2A adapter, then plug the adapter into a standard wall outlet. Alternatively, you can plug the USB cable directly into any compatible USB port (e.g., computer, power bank).

5. Operating Instructions

The ASOKO UNO-UT LED light bar is designed for simple and intuitive operation.

5.1 Power On/Off and Dimming

Locate the silicone dimmer switch on the power cable. This switch controls both power and brightness levels.

• To Turn On/Off: Gently press the silicone dimmer switch once to turn the light on or off.
• To Adjust Brightness: While the light is on, gently press the silicone dimmer switch repeatedly to cycle through the three brightness levels: 0% (off), 50%, and 100%.
• Memory Function: The light will remember the last brightness setting used when turned off and on again.

5.2 Smart Plug and Timer Compatibility

The ASOKO UNO-UT light bar can be integrated with smart plugs or timers for automated on/off control. Note that dimming functions are controlled directly via the light's inline switch and are not typically supported by external smart plugs for this model.

6. Usage Scenarios

The ASOKO UNO-UT LED light bar is ideal for adding illumination to various areas:

• Kitchen: Under cabinets for countertop lighting.
• Office/Desk: For task lighting on workspaces or shelves.
• Closets/Wardrobes: To illuminate interiors for better visibility.
• Display Cases/Shelves: To highlight items or provide accent lighting.
• Bedrooms: As a reading light or subtle ambient lighting.

7. Specifications

8. Maintenance

To ensure the longevity and optimal performance of your ASOKO LED light bar, follow these simple maintenance guidelines:

• Cleaning: Gently wipe the light bar with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the finish or the LED components.
• Power Disconnection: Always disconnect the power adapter from the outlet before cleaning or performing any maintenance.
• Water Exposure: This product is not water resistant. Avoid exposing it to water or high humidity environments to prevent damage.
• Storage: If storing the light for an extended period, ensure it is clean, dry, and stored in a cool, safe place away from direct sunlight.

9. Troubleshooting

If you encounter any issues with your ASOKO LED light bar, refer to the following common solutions:

• Light Not Turning On:
  • Ensure the USB cable is securely connected to both the light bar and the power adapter/USB port.
  • Verify that the power adapter is firmly plugged into a working electrical outlet.
  • Press the inline dimmer switch to ensure it is not in the 'off' position.
• Light Flickering or Dim:
  • Check the power connection for any loose contacts.
  • Ensure the power source (USB port or adapter) is providing sufficient power (5V).
  • Cycle through the brightness levels using the dimmer switch to see if it resolves the issue.
• Light Not Responding to Dimmer Switch:
  • Ensure the light is receiving power.
  • Try unplugging and re-plugging the power cable to reset the device.

If the issue persists after trying these steps, please contact customer support.

10. Warranty & Support

The ASOKO UNO-UT LED light bar comes with a Limited Warranty. Please refer to the product packaging or contact customer support for specific warranty details.

• Return Policy: This product is eligible for a 30-day return/replacement policy.
• Manufacturer: Yeezen Lighting
• Customer Service: For support, please refer to the contact information provided on the product packaging or the official ASOKO website.