AFI AR8641032

Download PDF
Contents

AFI Madison Queen Foundation Bed User Manual

Model: AR8641032 | Brand: AFI

Product Overview

The AFI Madison Queen Foundation Bed is a solid wood bed frame designed for durability and timeless elegance. This bed frame requires a foundation or box spring to support your mattress. It features a traditional panel design and includes a surface mount turbo charger with two USB ports for convenient device charging.

This manual specifically covers the White Queen model (AR8641032).

AFI Madison Queen Foundation Bed in White with bedding

Image: The AFI Madison Queen Foundation Bed in White, fully assembled with bedding, showcasing its traditional design and clean lines.

Specifications

FeatureDetail
Model NumberAR8641032
SizeQueen
Product Dimensions (L x W x H)82.76" x 63.7" x 50"
Weight Capacity800 lbs
MaterialSolid Wood and Veneers
ColorWhite
Finish TypePainted, Non-Toxic Finish
Special FeaturesSurface Mount Turbo Charger (2 USB Ports, 0.5V/3.5A, 6-foot cord, ETL listed, 18GA wire)
Assembly RequiredYes
Box Spring RequiredYes
Included ComponentsHeadboard, Slats, Installation Manual
Detailed dimensions of the AFI Madison Queen Foundation Bed frame

Image: Technical drawing showing the dimensions of the AFI Madison Queen Foundation Bed frame, including length, width, height, and headboard details.

Setup and Assembly

Assembly of the AFI Madison Queen Foundation Bed is required. It is recommended to have at least two people for assembly. Ensure all components are present before beginning.

Before You Begin:

  • Review the included installation manual thoroughly.
  • Clear a spacious area for assembly.
  • Identify all parts and hardware using the parts list in the manual.
  • Gather necessary tools (typically a Phillips head screwdriver and possibly a rubber mallet, though specific tools will be listed in the manual).

Assembly Steps (General Guidance):

  1. Attach the side rails to the headboard and footboard.
  2. Install the center support beam and legs (if applicable).
  3. Place the bed slats across the frame.
  4. Secure the surface mount turbo charger to the designated location on the headboard or side rail.
  5. Ensure all connections are tight and secure before placing a mattress and box spring.
AFI Madison Queen Foundation Bed frame without mattress

Image: The AFI Madison Queen Foundation Bed frame, showing the headboard, side rails, and slats, ready for a box spring and mattress.

Operating Instructions

Using the Bed Frame:

The Madison Queen Foundation Bed is designed to support a queen-sized mattress and a queen-sized box spring or foundation. Ensure the box spring is properly seated on the bed slats for optimal support and mattress longevity.

Using the USB Charging Station:

The integrated surface mount turbo charger provides convenient access to power for your electronic devices. It features two USB ports (0.5V/3.5A output) and is connected via a 6-foot ETL listed cord.

  • Plug the power cord into a standard wall outlet.
  • Connect your USB charging cables to the ports on the charging station.
  • Ensure devices are compatible with USB charging and do not exceed the specified voltage/amperage.
Close-up of the USB charging station on the bed frame

Image: A close-up view of the surface mount turbo charger with two USB ports, integrated into the side of the bed frame's headboard.

Maintenance

Proper maintenance will ensure the longevity and appearance of your AFI Madison Queen Foundation Bed.

Cleaning:

  • For general cleaning, wipe the bed frame with a dry, soft cloth.
  • Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the finish.
  • For spills, blot immediately with a clean, dry cloth.

Structural Maintenance:

  • Periodically check all bolts and screws to ensure they are tight. Loose connections can lead to instability and damage.
  • Inspect bed slats for any signs of wear or damage. Replace if necessary to maintain proper mattress support.
  • Do not exceed the stated weight capacity of 800 lbs.

Troubleshooting

ProblemPossible CauseSolution
Bed feels wobbly or unstable.Loose hardware connections.Tighten all bolts and screws. Refer to the assembly manual for specific locations.
Squeaking noises from the bed.Loose connections, friction between wood parts, or issues with the box spring/mattress.Tighten all hardware. Apply furniture wax or silicone spray to contact points if wood-on-wood friction is suspected. Check if the box spring or mattress is the source of the noise.
USB charging station not working.Power cord not plugged in, faulty outlet, or damaged charging unit.Ensure the power cord is securely plugged into a working outlet. Test the outlet with another device. If the issue persists, contact customer support.
Damaged or missing parts upon arrival.Shipping damage or packaging error.Contact AFI customer support immediately with proof of purchase and details of the damaged/missing parts.

Warranty Information

The AFI Madison Queen Foundation Bed comes with a 1-year limited manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper assembly, misuse, abuse, accidents, or normal wear and tear.

For warranty claims, please retain your proof of purchase and contact AFI customer support.

Customer Support

For further assistance, questions regarding assembly, parts replacement, or warranty claims, please contact AFI Furnishings customer support.

Please have your model number (AR8641032) and proof of purchase ready when contacting support.

© 2024 AFI Furnishings. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.