Introduction
This user manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Lynnpark 1-Light LED Vanity Light Bar. This sleek and contemporary vanity light is designed to update your bathroom with efficient and bright illumination. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Safety Information
WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Improper installation can result in electric shock or fire.
- Ensure all electrical connections comply with local codes and ordinances, as well as the National Electric Code (NEC).
- Consult a qualified electrician if you are unsure about the installation process.
- Do not attempt to modify the fixture. Any modifications may void the warranty and create a safety hazard.
- This fixture is designed for indoor use only.
- Do not look directly into the LED light source when the fixture is powered on.
Package Contents
Verify that all components are present before beginning installation:
- LED Vanity Light Bar Fixture
- Mounting Hardware (screws, wire nuts, mounting bracket)
- Instruction Manual
Setup & Installation
Tools Required (not included): Screwdriver, wire strippers, electrical tape, safety glasses.
- Turn Off Power: Locate the circuit breaker that supplies power to the light fixture location and turn it OFF. Ensure power is completely disconnected before proceeding.
- Remove Old Fixture (if applicable): Carefully remove the existing light fixture, noting the wiring connections.
- Attach Mounting Bracket: Secure the mounting bracket to the electrical junction box using the provided screws. Ensure the bracket is firmly attached.
- Make Electrical Connections: Connect the fixture's wires to the house wires using the provided wire nuts. Match black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground). Ensure all connections are secure.
- Mount the Fixture: Carefully align the fixture with the mounting bracket and secure it in place using the provided screws. Ensure the fixture is flush against the wall and stable.
- Restore Power: Once the fixture is securely mounted and all connections are made, turn the power back ON at the circuit breaker.
Figure 1: Lynnpark 1-Light LED Vanity Light Bar (Product View)
Figure 2: Lynnpark 1-Light LED Vanity Light Bar (Installed View)
Operating Instructions
The Lynnpark LED Vanity Light Bar is designed for simple operation. Once properly installed and powered, the light can be controlled via a standard wall switch. If connected to a compatible dimmer switch, the light's brightness can be adjusted to your preference.
- Turning On/Off: Flip the wall switch connected to the fixture to turn the light on or off.
- Dimming (if applicable): If your light is connected to a compatible dimmer switch, adjust the dimmer control to increase or decrease the light intensity.
Maintenance
To ensure the longevity and appearance of your light fixture, follow these simple maintenance guidelines:
- Cleaning: Always disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or LED components.
- LED Longevity: The integrated LED light source is designed for long-term use and does not require bulb replacement.
- Inspection: Periodically check the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
Troubleshooting
If you experience issues with your light fixture, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Loose wiring connection. Faulty wall switch. | Check circuit breaker/fuse. Verify all wire connections are secure (power off first). Test or replace wall switch. |
| Light is dim or flickers. | Incompatible dimmer switch. Loose wiring. | Ensure dimmer switch is LED compatible. Check wiring connections (power off first). |
| Fixture hums or buzzes. | Incompatible dimmer switch. Loose wiring. | Replace dimmer with an LED compatible one. Check wiring connections (power off first). |
If the problem persists after trying these solutions, contact a qualified electrician or customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Style Selections |
| Model | VBL11BNK |
| Color | Nickel |
| Material | Nickel |
| Style | Contemporary |
| Light fixture form | Vanity |
| Room Type | Bathroom |
| Specific Uses For Product | Bathroom |
| Indoor/Outdoor Usage | Indoor |
| Power Source | Corded Electric |
| Control Method | Remote |
| Light Source Type | LED |
| Finish Type | Brushed |
| Shade Material | Nickel |
| Number of Light Sources | 1 |
| Voltage | 110 Volts |
| Theme | Contemporary |
| Light Color | white |
| Lighting Method | LED |
| Item Weight | 1.35 pounds |
| Number of Items | 1 |
| Wattage | 15 watts |
| Controller Type | Remote Control |
| Unit Count | 1.00 Count |
| Efficiency | High |
| Mounting Type | Wall Mount |
| Shade Color | Nickel |
| Fixture Type | Non Removable |
| Assembly Required | No |
| Manufacturer | Style Selections |
| UPC | 080629704060 |
| Product Dimensions | 26.5 x 5.61 x 5.64 inches |
| Date First Available | March 31, 2017 |
Warranty & Support
For warranty information or technical support, please refer to the product packaging or contact Style Selections customer service. Keep your purchase receipt as proof of purchase for any warranty claims.
