Samson MBA28 28-inch Microphone Boom Arm

Introduction

The Samson MBA28 Microphone Boom Arm is designed to provide flexible and silent microphone positioning for various applications, including radio, podcasting, and home studio recording. Its robust construction and thoughtful design ensure stable and effortless adjustment.

Figure 1: Samson MBA28 28-inch Microphone Boom Arm

Key Features:

• Articulating microphone boom arm
• Durable steel construction
• Internal springs for silent and effortless positioning
• 5/8”-27 mic clip threading
• 5lb maximum weight capacity

What's in the Box

Your Samson MBA28 package includes the following components:

• Samson MBA28 28-inch Microphone Boom Arm
• C-clamp mount
• Flange mount with wood screws

Setup

The Samson MBA28 offers two primary mounting options: a C-clamp for temporary attachment to a desk or table, and a flange mount for more permanent surface installation.

Option 1: C-Clamp Mount

1. Unscrew the C-clamp to open its jaws sufficiently to fit over the edge of your desk or table.
2. Position the C-clamp on a sturdy surface edge.
3. Tighten the C-clamp securely until it is firmly attached to the surface. Ensure it does not wobble.
4. Insert the base of the boom arm into the designated hole on the C-clamp.
5. Tighten the locking screw on the C-clamp to secure the boom arm in place.

Figure 2: C-Clamp Mount

Figure 3: Boom Arm with C-Clamp

Option 2: Flange Mount

1. Choose a permanent location on your desk or surface for the flange mount. Ensure the surface is thick enough to accommodate the wood screws.
2. Using the provided wood screws, securely attach the flange mount to the chosen surface.
3. Insert the base of the boom arm into the designated hole on the flange mount.
4. Tighten any locking mechanisms on the flange mount to secure the boom arm.

Figure 4: Boom Arm with Flange Mount

Attaching Your Microphone

1. The boom arm features a 5/8”-27 mic clip threading. Screw your microphone clip or shock mount onto this thread at the end of the boom arm.
2. Carefully attach your microphone to the microphone clip or shock mount.
3. Use the provided Velcro straps to manage your microphone cable along the boom arm for a tidy setup.

Figure 5: Microphone Attached to Boom Arm

Operating the Boom Arm

The Samson MBA28 is designed for silent and effortless positioning, thanks to its internal springs.

1. Positioning: Gently grasp the boom arm and move it to your desired position. The internal springs will hold it in place without the need for external knobs or levers.
2. Rotation: The boom arm can rotate 360 degrees at its base, allowing for flexible placement and easy movement out of the way when not in use.
3. Adjusting Tension: If needed, the tension of the arm's joints can be adjusted using the small screws located at each pivot point. Use an appropriate tool (not included) to make minor adjustments.

Figure 6: Boom Arm in Studio Setup

Official Product Video: MBA Series Microphone Boom Arms

Maintenance

To ensure the longevity and optimal performance of your Samson MBA28 Microphone Boom Arm, follow these maintenance guidelines:

• Cleaning: Wipe down the boom arm regularly with a soft, dry cloth to remove dust and debris. Avoid using abrasive cleaners or solvents.
• Joint Inspection: Periodically check all pivot points and mounting connections to ensure they are secure. Tighten any loose screws as needed.
• Spring Care: The internal springs are designed for durability. Avoid excessive force or sudden movements that could strain the mechanism.

Troubleshooting

If you encounter any issues with your Samson MBA28 Microphone Boom Arm, refer to the following common troubleshooting tips:

• Arm is too loose/tight: Adjust the tension screws at the pivot points using an appropriate tool. Turn clockwise to tighten, counter-clockwise to loosen.
• Microphone wobbles: Ensure your microphone clip or shock mount is securely screwed onto the 5/8”-27 threading. Also, check that the boom arm is firmly seated and locked into its desk mount.
• Mount is unstable: For C-clamp mounts, ensure it is fully tightened to a sturdy surface. For flange mounts, verify that the screws are properly installed and tightened into a solid surface.

Specifications

Warranty

Samson products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official Samson website. Keep your proof of purchase for any warranty claims.

Support

For further assistance, technical support, or product information, please visit the official Samson website or contact their customer service department. Online resources, FAQs, and driver downloads may also be available.

• Online Support: Visit the SAMSON Store on Amazon
• Contact: Refer to your product packaging or the official Samson website for contact information.