Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your GROHE Get Single Lever Basin Mixer, Model 23586000. Please read these instructions carefully before beginning installation or use to ensure proper function and longevity of your product.
The GROHE Get single lever basin mixer is a 1/2 inch, small-size single-hole faucet featuring a metal lever. It incorporates advanced GROHE technologies for enhanced performance and water efficiency.
Product Features
- GROHE SilkMove ES 35 mm Ceramic Cartridge: Ensures smooth and precise control over water temperature and flow, providing effortless operation. The ES (Energy Saving) function ensures that only cold water flows when the lever is in the mid-position, helping to save energy.
- GROHE EcoJoy 5.7 litres/min: This technology reduces water consumption without compromising performance, contributing to water and energy savings.
- GROHE StarLight Surface: Provides a durable, scratch-resistant chrome finish that is easy to clean and maintains its shine over time.
- QuickFix Quick-Fastening System: Designed for fast and hassle-free installation.
- Smooth Body Pop-Up Waste Set: Includes a convenient pop-up waste set for easy basin drainage.
- Flexible Connection Hoses: For straightforward connection to your water supply.
Image: GROHE EcoJoy technology, highlighting up to 50% water savings without comfort loss.
Image: GROHE SilkMove ES technology, indicating cold water in the mid-position for energy and cost savings.
Setup and Installation
Before starting, ensure you have all necessary tools and that the main water supply is turned off. Refer to the technical drawing for dimensions and component identification.
Components Checklist:
- Basin Mixer (faucet body)
- Mounting hardware (washer, nut, threaded rod)
- Flexible connection hoses (hot and cold)
- Pop-up waste set
Installation Steps:
- Prepare the Basin: Ensure the mounting hole on your basin is clean and free of debris. The required hole diameter is approximately Ø34 mm.
- Install Faucet: Insert the flexible connection hoses and the threaded rod into the faucet body. Place the faucet onto the basin, ensuring the base gasket is correctly seated.
- Secure Faucet: From underneath the basin, slide the rubber washer and metal washer onto the threaded rod, then tighten the mounting nut to secure the faucet firmly.
- Connect Water Supply: Connect the flexible hoses to the hot and cold water supply lines. Ensure a watertight seal using appropriate tools and sealing tape if necessary. The connection size is G3/8.
- Install Pop-Up Waste: Assemble and install the pop-up waste set into the basin drain hole according to the separate instructions provided with the waste set. Connect the pop-up rod to the lever on the faucet. The waste connection size is G1 1/4.
- Test for Leaks: Once all connections are secure, slowly turn on the main water supply and check for any leaks. Operate the faucet to ensure proper water flow and temperature control.
Image: Technical drawing illustrating the dimensions and components of the GROHE Get single lever basin mixer, including mounting details and connections.
Operating Instructions
The GROHE Get Single Lever Basin Mixer is designed for intuitive and efficient use.
- Water Flow Control: Lift the lever handle upwards to turn on the water and increase the flow. Push the lever downwards to reduce the flow and turn off the water.
- Temperature Control: Move the lever handle to the left for hot water and to the right for cold water. The mid-position (lever pointing straight forward) provides cold water only, thanks to the GROHE SilkMove ES feature, saving energy.
- Pop-Up Waste Operation: Use the small rod located behind the faucet body to open and close the basin's pop-up waste. Pull up the rod to close the drain and push down to open it.
Maintenance
To maintain the pristine condition and functionality of your GROHE Get basin mixer, follow these simple maintenance guidelines:
- Cleaning the Surface: Clean the GROHE StarLight chrome surface with a soft cloth and mild soap or a non-abrasive liquid cleaner. Avoid using abrasive sponges, scouring agents, or cleaners containing alcohol, acids, or ammonia, as these can damage the finish. Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
- Aerator Cleaning: Periodically unscrew the aerator at the tip of the spout and clean any mineral deposits or debris. This helps maintain optimal water flow.
- Cartridge Care: The GROHE SilkMove ES ceramic cartridge is designed for long-lasting, maintenance-free operation. If you notice a change in lever smoothness or water flow, consult a qualified plumber.
Troubleshooting
If you encounter issues with your GROHE Get basin mixer, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Low water flow | Clogged aerator; partially closed stopcock; low water pressure. | Clean or replace aerator; ensure stopcocks are fully open; check household water pressure. |
| Water drips from spout | Worn cartridge. | Contact a qualified plumber to replace the ceramic cartridge. |
| Difficulty moving lever | Mineral buildup in cartridge. | Contact a qualified plumber for inspection or cartridge replacement. |
| Leaks at connections | Loose connections; worn seals. | Tighten connections; replace seals if necessary. Ensure proper sealing during installation. |
Specifications
Detailed technical specifications for the GROHE Get Single Lever Basin Mixer, Model 23586000:
| Feature | Detail |
|---|---|
| Brand | GROHE |
| Model Name | 23586000 |
| Mounting Type | Deck Mount, Single Hole Installation |
| Finish Type | Chrome (GROHE StarLight) |
| Material | Metal |
| Number of Handles | 1 (Single Lever) |
| Hole Count | 1 |
| Cartridge | GROHE SilkMove ES 35 mm Ceramic Cartridge |
| Flow Rate | GROHE EcoJoy 5.7 litres/min |
| Included Components | Lever, Pop-up waste set, Flexible connection hoses |
| Product Dimensions | 10.04 x 9.25 x 2.56 inches |
| Item Weight | 3.25 pounds (1.48 Kilograms) |
| Recommended Uses | Basin |
Warranty and Support
GROHE products are manufactured to the highest quality standards and are backed by a manufacturer's warranty. For specific warranty details, please refer to the warranty card included with your product or visit the official GROHE website.
If you require technical assistance, spare parts, or have any questions not covered in this manual, please contact GROHE customer support. Ensure you have your product model number (23586000) and proof of purchase available when contacting support.
