ABLEGRID 5V AC/DC Adapter

Introduction

Thank you for choosing the ABLEGRID 5V AC/DC Adapter. This power supply is specifically designed to provide reliable and stable power to your Sentry HW701 and HW702 Wireless Headphones. Please read this manual carefully before use to ensure proper operation and longevity of your device.

Important Safety Information

Always observe the following safety precautions:

• Compatibility: This adapter is ONLY for Sentry HW701 and HW702 Wireless Headphones. It is NOT compatible with 12V devices or other models. Verify your device's voltage requirements before connecting.
• Voltage Protection: The adapter features Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP) to safeguard your devices.
• Indoor Use Only: Do not expose the adapter to moisture or use it in wet environments.
• Proper Handling: Do not disassemble, modify, or drop the adapter. Avoid extreme temperatures.
• Unplug When Not In Use: Disconnect the adapter from the power outlet when not in use for extended periods.

Product Features

• Reliable replacement power supply for Sentry HW701 and HW702 Wireless Headphones.
• Tested units ensuring great working condition.
• Wide input voltage range: 100-240VAC 50/60Hz, suitable for worldwide use.
• Built-in safety protections: Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP).

Setup Instructions

Follow these steps to set up your ABLEGRID 5V AC/DC Adapter:

1. Inspect the Adapter: Before connecting, visually inspect the adapter and its cable for any signs of damage.
   

   Image: Top view of the ABLEGRID 5V AC/DC Adapter, showing the main body and attached power cord.

2. Connect to Headphones: Locate the power input port on your Sentry HW701 or HW702 Wireless Headphones. Carefully insert the adapter's output plug into this port. Ensure a snug fit.
   

   Image: Side view of the ABLEGRID 5V AC/DC Adapter, highlighting the wall plug and the attached output cable.

3. Plug into Power Outlet: Insert the adapter's wall plug into a standard 100-240VAC 50/60Hz electrical outlet.
   

   Image: Angled view of the ABLEGRID 5V AC/DC Adapter, showing the compact design suitable for wall outlets.

4. Verify Power: Once connected, your Sentry Wireless Headphones should receive power. Check the headphone's power indicator (if available) to confirm.

Operation

The ABLEGRID 5V AC/DC Adapter operates as a simple plug-and-play device. Once properly connected to your Sentry HW701 or HW702 Wireless Headphones and a suitable power outlet, it will continuously supply the necessary 5V power. No additional configuration is required.

Care and Maintenance

• Cleaning: Disconnect the adapter from the power outlet before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or aerosols.
• Storage: Store the adapter in a cool, dry place when not in use. Avoid wrapping the cable too tightly around the adapter body to prevent damage.
• Cable Care: Do not bend, twist, or pull the cable excessively. Ensure the cable is not pinched or placed under heavy objects.

Troubleshooting

Specifications

Warranty and Support

Specific warranty information for this ABLEGRID product is not provided in this manual. For warranty details, technical support, or any inquiries, please refer to the product packaging or contact ABLEGRID customer service directly through their official website or the retailer where the product was purchased.

You can visit the ABLEGRID Store for more information: ABLEGRID Store on Amazon