1. Introduction
Thank you for purchasing the Karlsson KA5655DW Mini Cube Alarm Clock. This compact and stylish alarm clock features a wood veneer finish and a clear LED display, designed to complement any modern interior. This manual provides essential information for the proper setup, operation, and maintenance of your device. Please read these instructions carefully before use and retain them for future reference.
2. Package Contents
- Karlsson KA5655DW Mini Cube Alarm Clock
- User Manual
Note: Batteries are not included and must be purchased separately.
3. Product Overview
The Karlsson KA5655DW is a minimalist cube-shaped alarm clock with an integrated LED display. Its compact design makes it suitable for various spaces.
Figure 1: Front View of the Alarm Clock. This image displays the front of the Karlsson KA5655DW Mini Cube Alarm Clock, highlighting its wood veneer finish and the illuminated LED digital time display. The Karlsson brand name is subtly visible below the time.
The controls for the alarm clock are typically located on the back or bottom of the unit to maintain its sleek, minimalist aesthetic. These controls usually include buttons for setting the time, setting the alarm, and toggling alarm functions.
Figure 2: Side View of the Alarm Clock. This image shows a side view of the Karlsson KA5655DW Mini Cube Alarm Clock, emphasizing its clean, unadorned wood veneer surface and cubic form. No buttons or ports are visible on this side, indicating a minimalist design.
4. Setup
4.1 Battery Installation
- Locate the battery compartment cover, typically on the back or bottom of the alarm clock.
- Remove the cover by sliding or gently prying it open.
- Insert three (3) AAA batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Replace the battery compartment cover securely.
The LED display should illuminate, indicating the clock is powered on.
5. Operating Instructions
The Karlsson KA5655DW alarm clock typically features a set of control buttons on its rear or base. Common buttons include a "SET" or "MODE" button, and "UP" and "DOWN" buttons for adjustments.
5.1 Setting the Time
- Press and hold the SET or MODE button for a few seconds until the hour digits begin to flash.
- Use the UP and DOWN buttons to adjust the hour.
- Press the SET or MODE button again to move to the minute setting. The minute digits will flash.
- Use the UP and DOWN buttons to adjust the minutes.
- Press the SET or MODE button one last time to confirm the time and exit the setting mode.
5.2 Setting the Alarm
- Press the SET or MODE button repeatedly until the alarm time display appears (often indicated by an alarm icon or "AL").
- Press and hold the SET or MODE button until the alarm hour digits begin to flash.
- Use the UP and DOWN buttons to adjust the alarm hour.
- Press the SET or MODE button again to move to the alarm minute setting. The alarm minute digits will flash.
- Use the UP and DOWN buttons to adjust the alarm minutes.
- Press the SET or MODE button to confirm the alarm time.
- To activate or deactivate the alarm, look for a dedicated ALARM ON/OFF switch or button. An alarm icon on the display usually indicates that the alarm is active.
5.3 Snooze Function
When the alarm sounds, pressing any button (often the top surface of the cube or a specific snooze button) will typically activate the snooze function, silencing the alarm temporarily for a few minutes before it sounds again.
5.4 Display Modes (if applicable)
Some models may offer different display modes, such as 12-hour/24-hour format, or a display that alternates between time, date, and temperature. Consult the specific markings on your device's control buttons for these functions. A short press of the SET or MODE button often cycles through display options.
6. Maintenance
6.1 Cleaning
To clean the alarm clock, gently wipe the surface with a soft, dry, or slightly damp cloth. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the wood veneer finish and the LED display.
6.2 Battery Replacement
When the display dims or the clock functions become erratic, it is time to replace the batteries. Follow the battery installation steps outlined in Section 4.1. Always replace all three AAA batteries simultaneously with new ones to ensure optimal performance.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is dim or blank. | Low or depleted batteries. Incorrect battery insertion. | Replace batteries with new AAA batteries, ensuring correct polarity. |
| Alarm does not sound. | Alarm is not activated. Alarm volume is too low (if adjustable). | Ensure the alarm function is switched ON. Check if there's a volume setting (though typically fixed for this model). |
| Time is incorrect. | Time was not set correctly. | Refer to Section 5.1 "Setting the Time" to reset the current time. |
8. Specifications
- Model: KA5655DW
- Brand: Karlsson
- Material: Wood Veneer
- Display Type: LED Digital
- Dimensions: 8 x 8 x 8 cm (approximately)
- Power Source: 3 x AAA Batteries (not included)
- Special Features: Alarm Function
- Color: Dark Wood Veneer with White LED
9. Warranty and Support
Karlsson products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service inquiries, please refer to the warranty card included with your purchase or visit the official Karlsson website. Please retain your proof of purchase for warranty claims.
