Transformers Allspark Tech Autobot Sqweeks Action Figure Instruction Manual

1. Product Overview

The Transformers Allspark Tech Autobot Sqweeks figure is an interactive action figure designed to be powered by the Allspark Tech cube. This figure features motion-activated lights, sounds, and phrases when connected to an Allspark Tech cube. The Autobot Sqweeks figure is a 5.5-inch scale non-converting figure.

Image 1.1: The Transformers Allspark Tech Autobot Sqweeks figure, Allspark Tech cube, and USB charging cord as packaged.

2. Safety Information

Please read all instructions before use. This product is intended for ages 6 and up. Adult supervision is recommended during charging and initial setup. Keep small parts away from young children to prevent choking hazards. Do not attempt to modify the Allspark Tech cube or the figure, as this may cause damage or injury.

3. What's Included

• Transformers: The Last Knight Allspark Tech Autobot Sqweeks figure
• Allspark Tech cube (rechargeable 150mAh LiPo battery included)
• USB charging cord
• Instructions

Image 3.1: Contents of the Allspark Tech Autobot Sqweeks package.

4. Setup

4.1 Charging the Allspark Tech Cube

1. Locate the USB charging cord.
2. Connect the small end of the USB charging cord to the Allspark Tech cube.
3. Connect the large end of the USB charging cord to a powered USB port (e.g., computer, USB wall adapter).
4. The cube will illuminate to indicate charging. A full charge typically takes approximately 30 minutes.

Image 4.1: The Allspark Tech cube.

4.2 Inserting the Allspark Tech Cube into the Figure

1. Ensure the Allspark Tech cube is charged.
2. Locate the compartment on the Autobot Sqweeks figure designed for the Allspark Tech cube. This is typically on the chest area.
3. Carefully open the compartment.
4. Insert the charged Allspark Tech cube into the compartment, ensuring it is seated correctly.
5. Close the compartment securely.

Image 4.2: Inserting the Allspark Tech cube into the Autobot Sqweeks figure.

5. Operating Instructions

5.1 Activating Lights, Sounds, and Phrases

Once the Allspark Tech cube is securely inserted into the Autobot Sqweeks figure, the figure will come to life. The cube activates over 15 unique lights, sounds, and phrases.

5.2 Motion-Activated Effects

The figure is designed with motion-activated technology. Moving the figure will trigger various epic effects, allowing for interactive play. Experiment with different movements to discover all the activated responses.

5.3 Attaching Accessories

The Autobot Sqweeks figure comes with a detachable weapon accessory. This accessory can be attached to the figure's hand to enhance play scenarios.

Image 5.1: Autobot Sqweeks figure with its weapon accessory.

6. Maintenance

6.1 Cleaning

To clean the figure, wipe it with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Avoid submerging the figure or the Allspark Tech cube in water.

6.2 Storage

Store the figure and Allspark Tech cube in a cool, dry place away from direct sunlight and extreme temperatures. Remove the Allspark Tech cube from the figure if storing for extended periods.

7. Troubleshooting

7.1 Figure Not Responding

• Ensure the Allspark Tech cube is fully charged.
• Verify that the Allspark Tech cube is correctly inserted into the figure's compartment.
• Check for any obstructions in the cube compartment.

7.2 Charging Issues

• Confirm the USB charging cord is securely connected to both the cube and a powered USB port.
• Try a different USB port or charging adapter.
• Ensure the USB charging cord is not damaged.

8. Specifications

Image 8.1: Rear view of the Autobot Sqweeks figure.

9. Warranty and Support

This product is sold without a manufacturer's warranty. For any product-related inquiries or support, please contact Hasbro customer service directly. Refer to the packaging for contact information or visit the official Hasbro website.