1. Introduction
This manual provides detailed instructions for the proper installation, operation, and maintenance of the Belden PPC EX11N716WSPLUS AquaTight Compression Connectors. These connectors are designed to provide a robust, moisture-tight seal and reliable signal transmission for coaxial cable applications, preventing common issues such as signal degradation and loose connections.
2. Product Overview
The Belden PPC EX11N716WSPLUS AquaTight Compression Connectors integrate advanced features to ensure superior performance and durability. Key characteristics include:
- AquaTight Design: Features an integrated weather seal for a moisture-tight connection, visible for easy verification.
- SignalTight Technology: Ensures consistent signal transmission even if the connector is not fully tightened, minimizing service interruptions.
- Universal Compatibility: Designed for use with 60% through Quad Shield Series 6 cable, accommodating various jacket types (PE and PVC).
- Durability: Constructed with NiTin-plated brass for reliable, long-term performance.
Figure 2.1: Overview of the Belden PPC EX11N716WSPLUS AquaTight Compression Connector.
Figure 2.2: Cross-sectional diagram illustrating SignalTight Technology, showing the continuity member, tapered compression area, movable push-up pin, NiTin-plated brass construction, and integrated port seal.
3. Setup and Installation
Proper installation is crucial for the optimal performance of the AquaTight Compression Connectors. Specialized compression tools are required for correct application.
3.1 Required Tools
- Coaxial Cable Stripper (calibrated for RG11 cable)
- Compression Tool (compatible with RG11 F-connectors)
- RG11 Coaxial Cable
3.2 Installation Steps
- Prepare the Cable: Using a coaxial cable stripper, carefully strip the RG11 cable to the manufacturer's recommended dimensions. Ensure the center conductor, dielectric, and braid are exposed correctly. The connector itself may have measurement grooves to assist in verifying the stripped length.
- Insert the Cable: Push the prepared coaxial cable firmly into the back of the AquaTight connector. Ensure the center conductor aligns with the connector's center pin receptacle and the cable jacket is fully seated against the connector body. The connector's design allows for confirmation that the center conductor is properly aligned.
- Compress the Connector: Place the connector with the inserted cable into the appropriate compression tool. Actuate the tool to compress the connector onto the cable. Apply firm, even pressure until the compression cycle is complete. This action creates the secure mechanical and electrical connection, and activates the integrated weather seal.
- Verify Installation: Visually inspect the connection. The clear integrated seal should be visible and properly seated, indicating a moisture-tight seal. Ensure the connector is securely attached to the cable and cannot be easily pulled off.
Figure 3.1: Side view of the connector, showing the knurled nut and integrated seal.
Figure 3.2: Angled view highlighting the connector's robust construction.
4. Operation
Once properly installed, the Belden PPC EX11N716WSPLUS AquaTight Compression Connector functions passively to maintain signal integrity and environmental protection.
- Signal Transmission: The SignalTight technology ensures reliable electrical continuity, minimizing signal loss and interference, even if the connector is not fully tightened to the receiving port.
- Environmental Protection: The AquaTight integrated weather seal provides a barrier against moisture ingress, protecting the cable and connection from environmental elements that can degrade performance over time.
5. Maintenance
Belden PPC AquaTight Compression Connectors are designed for long-term, maintenance-free operation once correctly installed. However, periodic visual inspection is recommended, especially in outdoor or harsh environments.
- Visual Inspection: Check for any signs of physical damage, corrosion, or degradation of the cable jacket near the connector.
- Connection Integrity: Ensure the connector remains securely attached to the cable and any connected device.
If any issues are observed, re-evaluate the connection or replace the connector if necessary.
6. Troubleshooting
Most performance issues related to coaxial cable connections stem from improper installation or damaged connectors. The AquaTight design aims to mitigate these problems.
| Symptom | Possible Cause | Solution |
|---|---|---|
| Poor signal quality (e.g., pixilation, tiling, reduced data speeds, poor VoIP) | Loose or improperly installed connector; damaged cable; moisture ingress. | Ensure the connector is fully compressed and securely tightened. Inspect the cable for damage. If the connector was improperly installed, re-terminate the cable with a new connector following the installation steps. |
| Connector detaches from cable | Insufficient compression during installation; incorrect cable stripping. | Re-terminate the cable with a new connector, ensuring proper cable preparation and full compression with the correct tool. |
| Visible moisture inside connection area | Compromised AquaTight seal; improper installation. | The clear seal should be visible and intact. If moisture is present, the seal may be compromised. Re-terminate with a new connector, ensuring the seal is properly engaged during compression. |
Always ensure that the correct tools are used and installation procedures are followed precisely to prevent these issues.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | EX11N716WSPLUS |
| Item Model Number (Manufacturer) | 4330123096 |
| Brand | Belden |
| Connector Type | Coaxial (F-Type Compression) |
| Cable Compatibility | RG11 (60% through Quad Shield, PE and PVC jackets) |
| Contact Material | Nickel |
| Insulation Material | Polyethylene or Polypropylene |
| Terminal Type | Screw Terminal |
| Product Dimensions (Packaging) | 9 x 5 x 0.2 inches; 1.1 Pounds |
8. Warranty Information
Specific warranty details for the Belden PPC EX11N716WSPLUS AquaTight Compression Connectors are not provided in this manual. For warranty information, please refer to the official Belden website or contact Belden customer service directly.
9. Support
For technical assistance, additional product information, or support regarding the Belden PPC EX11N716WSPLUS AquaTight Compression Connectors, please visit the official Belden website or contact their customer support department. Contact details can typically be found on the manufacturer's website.