1. Safety Information
WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
General Power Tool Safety Warnings
- Work Area Safety: Keep work area clean and well lit. Cluttered or dark areas invite accidents.
- Electrical Safety: Avoid body contact with earthed or grounded surfaces.
- Personal Safety: Always wear eye protection, dust mask, non-skid safety shoes, hard hat, or hearing protection.
- Tool Use and Care: Do not force the power tool. Use the correct power tool for your application.
- Battery Tool Use and Care: Recharge only with the charger specified by the manufacturer.
Circular Saw Specific Safety Warnings
- Cutting Procedure: Hold the power tool by insulated gripping surfaces when performing an operation where the cutting accessory may contact hidden wiring or its own cord.
- Kickback: Avoid kickback by maintaining proper grip and body position.
- Blade Guard: Ensure the lower guard is properly closed before each use.
2. Components Overview
Familiarize yourself with the main components of your Makita XSR01PT Circular Saw Kit.
- Circular Saw (XSR01Z): The main cutting tool.
- 7-1/4" 24T Ultra-Coated C.T. Saw Blade (A-94530-A): The cutting accessory.
- Battery: 18V LXT Lithium-Ion batteries (two 5.0Ah batteries included in kit).
- Battery Charger: For recharging the LXT batteries.
- Wrench (783204-6): For blade changes and adjustments.
- Rip Fence: An accessory for making straight rip cuts.
Image: Makita XSR01PT 36V (18V X2) LXT Brushless Rear Handle 7-1/4" Circular Saw Kit, showing the saw, batteries, charger, and bag.
Image: Close-up view of the Makita XSR01PT circular saw, highlighting the blade, base, and motor housing.
3. Setup
3.1 Charging Batteries
- Connect the battery charger to a power outlet.
- Insert the 18V LXT batteries into the charger slots.
- Allow batteries to charge fully. The charger indicates charge status.
Video: Official Makita video demonstrating the charging process of the 18V LXT batteries with the dual charger.
3.2 Installing/Changing the Saw Blade
- Ensure batteries are removed from the saw.
- Press the shaft lock button to secure the blade.
- Use the provided wrench (783204-6) to loosen the blade bolt.
- Remove the outer flange and the old blade.
- Install the new 7-1/4" 24T Ultra-Coated C.T. Saw Blade (A-94530-A) with the teeth pointing in the direction of rotation.
- Replace the outer flange and tighten the blade bolt securely with the wrench.
- Release the shaft lock button.
Image: Close-up of the Makita XSR01PT circular saw blade area, illustrating where the blade is installed and secured.
3.3 Adjusting Cutting Depth
To adjust the cutting depth, loosen the depth adjustment lever, set the desired depth using the scale, and then tighten the lever.
3.4 Adjusting Bevel Angle
The saw offers a 0°-53° bevel capacity with positive stops at 22.5°, 45°, and 53°. Loosen the bevel adjustment lever, set the desired angle, and tighten the lever.
Image: Side view of the Makita XSR01PT circular saw, showing the bevel adjustment scale and lever.
4. Operating Instructions
4.1 Powering On/Off
Insert two fully charged 18V LXT batteries into the saw. To start the saw, depress the safety button and then pull the trigger switch. Release the trigger to stop the saw.
4.2 Making a Cut
- Secure the workpiece firmly.
- Adjust the cutting depth and bevel angle as required.
- Align the saw blade with your cutting line.
- Start the saw before contacting the workpiece.
- Guide the saw smoothly through the material, maintaining a firm grip.
- Allow the blade to stop completely before setting the saw down.
Image: A person using the Makita XSR01PT circular saw to cut a wooden board, demonstrating proper handling and cutting technique.
4.3 Automatic Speed Change Technology
The saw features Automatic Speed Change technology, which automatically adjusts cutting speed and torque during the cut for optimum performance, especially in demanding applications.
Video: Official Makita video showcasing the Automatic Speed Change technology during cutting operations.
5. Maintenance
5.1 Cleaning
Regularly clean the saw to remove sawdust and debris. Use a dry cloth or compressed air. Ensure ventilation openings are clear.
5.2 Blade Care
Inspect the saw blade regularly for sharpness and damage. Replace dull or damaged blades promptly to ensure efficient and safe cutting.
5.3 Battery Care
Store batteries in a cool, dry place. Do not expose them to extreme temperatures. Always use genuine Makita batteries and chargers to prevent damage and ensure safety.
CAUTION: "Knock-Off" Makita Lithium-Ion Batteries May Burst Causing Fires, Personal Injuries or Property Damage.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Saw does not start | Dead batteries, safety button not pressed, faulty switch. | Charge batteries, ensure safety button is pressed before trigger, contact service if switch is faulty. |
| Reduced cutting performance | Dull blade, incorrect cutting depth, low battery charge. | Replace blade, adjust cutting depth, charge batteries. |
| Saw kicks back | Improper grip, blade binding, dull blade. | Maintain firm grip, ensure workpiece is secure, replace dull blade. |
| Battery indicator shows low charge quickly | Batteries not fully charged, old batteries, extreme temperatures. | Ensure full charge, consider replacing old batteries, operate in suitable temperatures. |
7. Specifications
- Model: XSR01PT
- Power Source: Battery Powered (36V, 18V X2 LXT Lithium-Ion)
- Battery Capacity: 5.0Ah (two batteries included in kit)
- Blade Diameter: 7-1/4 inches
- No-Load Speed: 5,100 RPM
- Cutting Capacity at 90°: 2-9/16 inches
- Bevel Capacity: 0° - 53°
- Weight (with 5.0Ah batteries): 12.4 lbs
- Motor: Brushless
- Special Features: Electric Brake, Automatic Speed Change Technology, Extreme Protection Technology (XPT)
8. Warranty & Support
Makita provides a 3-year limited warranty on the tool, battery, and charger for the XSR01PT kit.
For technical support, questions, or to locate a service center, please visit www.makitatools.com or call 1-800-4-MAKITA.
Video: Official Makita video highlighting the 3-year limited warranty on Makita LXT tools, batteries, and chargers.
